A team of Lawrence Livermore National Laboratory researchers has demonstrated the 3D printing of shape-shifting structures that can fold or unfold to reshape themselves when exposed to heat or electricity. The micro-architected structures were fabricated from a conductive, environmentally responsive polymer ink developed at the Lab.
In an article published recently by the journal Scientific Reports, Lab scientists and engineers revealed a strategy for creating boxes, spirals and spheres from shape memory polymers (SMPs), bio-based “smart” materials that exhibit shape-changes when resistively heated or when exposed to the appropriate temperature.
In the paper, the researchers describe creating primary shapes from an ink made from soybean oil, additional co-polymers and carbon nanofibers, and “programming” them into a temporary shape at an engineered temperature, determined by chemical composition. Then the shape-morphing effect was induced by ambient heat or by heating the material with an electrical current, which reverts the part’s temporary shape back to its original shape.
Ultimately, Rodriguez said, researchers can use the materials to create extremely complex parts.
“If we printed a part out of multiple versions of these formulations, with different transition temperatures, and run it through a heating ramp, they would expand in a segmented fashion and unpack into something much more complex,” she said.
Through a direct-ink writing 3D printing process, the team produced several types of structures — a bent conductive device that morphed to a straight device when exposed to an electric current or heat, a collapsed stent that expanded after being exposed to heat and boxes that either opened or closed when heated.
“We have these materials with 3D structures but they have extra smart properties; they can retain a memory of the previous structure,” said Lab staff scientist James Lewicki. “It opens up a whole new property set. If you can print with these polymer composites you can build things and electrically activate them to unfold. Instead of a dumb lump, you are left with this sentient, responsive material.”
The research derives from a Laboratory Directed Research & Developmentproject to develop high-performance 3D-printed carbon fiber composites.
Others contributing to the paper were Lab scientists and engineers Cheng Zhu, Eric Duoss, Thomas Wilson and Chris Spadaccini.
Learn more:Â Going beyond 3D printing to add a new dimension for additive manufacturing
The Latest on: 4D Printing
[google_news title=”” keyword=”4D Printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 4D Printing
- Adidas introduces 4D FORWARD running shoe - 3X more movementon March 28, 2024 at 3:07 am
The unique printing shape of the "woven" shoe - chosen from among 5 ... In various laboratory and outdoor tests, the 4D FWD model was found to produce 3 times more forward movements than regular ...
- Global 3D and 4D Technology Market Outlook Report to 2029: Ongoing Advancements and Increasing Research Initiatives to Commercialize 4D Printingon March 25, 2024 at 7:39 am
The growth of the 3D and 4D technology market is driven by governed by the augmented demand for 3D and 4D technology in entertainment industry, surge in the trend of 3D and 4D gaming, increasing ...
- Applications of 4D-Printed Shape-Memory Polymerson February 12, 2024 at 6:01 am
Four-dimensional (4D) printing is an additive manufacturing (AM) process in which three-dimensional (3D) printing is combined with smart materials that have shape memory. During 4D printing ...
- 3D printingon November 17, 2023 at 8:59 pm
The same thing can happen with 3D and 4D printing if the print nozzle is too far from the printing substrate.... Most coffee lovers typically dump the used grounds from their morning cuppa ...
- Overview of Two-Photon Polymerization based on 4D printing methodologies, materials, stimuli and their relevant applications (IMAGE)on October 10, 2023 at 6:52 pm
Credit must be given to the creator. Only noncommercial uses of the work are permitted.
- 4D-printed breast implants, you say? But only for cancer patientson July 22, 2023 at 2:00 am
4D printing differs from 3D by offering "dynamic" print-outs "that are able to change their morphology and/or characteristics", but at the same time, "are predictable and programmable, and are ...
- DIY Self-Assembling 4D Printingon November 28, 2022 at 8:45 pm
The last time we saw 4D printing, there were magnets involved. We think this is an exciting time where people aren’t just trying to get conventional printing to work well, but are pushing the ...
- 4D printingon November 28, 2022 at 4:00 pm
The last time we saw 4D printing, there were magnets involved. We think this is an exciting time where people aren’t just trying to get conventional printing to work well, but are pushing the ...
via Bing News