Droplets of different sizes sit on grids of transducers that vibrate to create tunnels in a thin layer of oil, which can transport the droplets in multiple directions.
Vibrating transducers create tunnels in a thin layer of oil to transport droplets across a chip without leaving a trace behind
Engineers at Duke University have demonstrated a versatile microfluidic lab-on-a-chip that uses sound waves to create tunnels in oil to touchlessly manipulate and transport droplets. The technology could form the basis of a small-scale, programmable, rewritable biomedical chip that is completely reusable to enable on-site diagnostics or laboratory research.
The results appear online on June 10 in the journal Science Advances.
“Our new system achieves rewritable routing, sorting and gating of droplets with minimal external control, which are essential functions for the digital logic control of droplets,” said Tony Jun Huang, the William Bevan Distinguished Professor of Mechanical Engineering and Materials Science at Duke. “And we achieve it with less energy and a simpler setup that can control more droplets simultaneously than previous systems.”
Automated fluid handling has driven the development of many scientific fields such as clinical diagnostics and large-scale compound screening. While ubiquitous in the modern biomedical research and pharmaceutical industries, these systems are bulky, expensive and do not handle small volumes of liquids well.
Lab-on-a-chip systems have been able to fill this space to some extent, but most are hindered by one major drawback—surface absorption. Because these devices rely on solid surfaces, the samples being transported inevitably leave traces of themselves behind that can lead to contamination.
The new lab-on-a-chip platform uses a thin layer of inert, immiscible oil to stop droplets from leaving behind any trace of themselves. Just below the oil, a grid of piezoelectric transducers vibrate when electricity is passed through them. Just like the surface of a subwoofer, these vibrations create sound waves in the thin layer of oil above them.
These sound waves form complex patterns when they bounce off the top and bottom of the chip as well as when they run into one another. By meticulously planning the design of the transducers and controlling the frequency and strength of the vibrations causing the waves, the researchers are able to create vortices that, when combined, form tunnels that can push and pull droplets in any direction along the surface of the device.
“The new system uses dual-mode transducers, which can transport droplets along x or y axis based on two different streaming patterns,” said Huang. “This is a big step up from our previous system, which simply created a series of dimples in the oil to pass droplets along on a single axis.”
Aiding Huang in the creation of this upgraded system was Krishnendu Chakrabarty, the John Cocke Distinguished Professor of Electrical and Computer Engineering at Duke, and his PhD student Zhanwei Zhong. The pair helped design the electronics at the heart of the new lab-on-a-chip demonstration, and greatly upgraded and miniaturized the wire connections, controllers and other hardware used in the system.
By using dual-mode transducers, the researchers were able to move droplets along two axes while simultaneously reducing the complexity of the electronics four-fold. They were also able to reduce the operating voltage of the transducers three-to-seven times lower than previous system, which allowed it to simultaneously control eight droplets. And by introducing a microcontroller to the setup, the researchers were able to program and automate much of the droplet movement.
The researchers show off the capabilities of their new device in a series of videos. In one, a droplet is quickly whisked around the exterior of a square. Others show droplets coming to a “T” intersection and turning right or left, and the creation of a “logic gate” that can either interrupt a droplet’s movement along a corridor or allow it to pass through.
The ability to control droplets in a manner similar to the logic systems found on a computer chip is essential to a wide variety of clinical and research procedures.
“Our next step is to combine the miniaturized radio-frequency power-supply and control board designed by Professor Chakrabarty’s team for large-scale integration and dynamic planning,” said Huang. “We’re also planning to integrate the ability to split droplets into two without having to touch them.”
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
- Global Lab-on-a-Chip Industryon November 11, 2020 at 9:45 am
PRNewswire/ -- Amid the COVID-19 crisis, the global market for Lab-on-a-Chip estimated at US$5.1 Billion in the year 2020, is projected to reach a ...
- Stanford develops CRISPR 'lab on a chip' for detecting COVID-19on November 6, 2020 at 8:20 am
Researchers at Stanford University have developed a CRISPR-based “lab on a chip” to detect COVID-19, and are working with automakers at Ford to develop their prototype into a market-ready product.
- Archer Materials starts development of A1 Biochip, a lab-on-chip biosensing device to simplify disease detectionon November 4, 2020 at 5:00 pm
The materials technology company has made a step-change in advancing its graphene-based biosensor technology development to commence its ...
- Lab-on-a-chip devices could dramatically reduce COVID-19 detection timeson October 28, 2020 at 11:47 am
"These lab-on-a-chip devices are suitable for daily tests and are user-friendly, meaning no laboratory facilities are needed. These features make them a favorable real time detection system ...
- 'Lab on a chip': Faster COVID-19 antibody teston October 27, 2020 at 9:25 am
A new portable "lab on a chip," developed by the U-M scientists and demonstrated with help of the CDI, can identify the presence of COVID-19 antibodies in blood donors with greater speed and ...
Go deeper with Google Headlines on:
Go deeper with Bing News on:
- Could Ozone Emerge as Sterilization Method of Choice for Advanced Medtech?on November 3, 2020 at 4:00 pm
For instance, new technologies such as sensors and lab-on-a-chip devices frequently incorporate optical ... and a device has been marketed that was intended to sterilize reusable devices in healthcare ...
- Armour, Clark share Bermuda lead, 64-year-old Funk makes cuton October 30, 2020 at 2:55 pm
"6 drug labs discovered in Richmond since JulyThe six suspected drug production operations shut down Wednesday follow another drug lab discovery during the ... so customers should get in the habit of ...
- Joining forces with community boards is one of Three Rivers' top prioritieson October 30, 2020 at 4:49 am
Council is making moves to further unify its region by working with some of its waterfront, sporting centre and community boards. Jill Walsh, chief administrative officer of Three Rivers, requested a ...
- Is YOUR mask safe? New research shows some stop just seven per cent of bacteriaon October 30, 2020 at 2:50 am
Firebox Reusable face masks and the Skinnydip Rainbow face covering. Now Which? is urging manufacturers and retailers to 'up their game' on face coverings after the consumer champion’s lab ...
- Using Acrylic to Lower Costs and Make Smaller Deviceson October 29, 2020 at 5:00 pm
The exception is steam sterilization, which is used most often to sterilize reusable devices in hospital environments ... Light transmission is critical for microfluidic lab-on-a-chip applications.