A research group at Chalmers University of Technology, Sweden, has developed an efficient process for breaking down any plastic waste to a molecular level. The resulting gases can then be transformed back into new plastics – of the same quality as the original. The new process could transform today’s plastic factories into recycling refineries, within the framework of their existing infrastructure.
?The fact that plastics do not break down, and therefore accumulate in our ecosystems, is one of our major environmental problems. But at Chalmers, a research group led by Henrik Thunman, Professor of Energy Technology, sees the resilience of plastic as an asset. The fact that it does not degrade makes it possible for circular usage, creating a true value for used plastic, and therefore an economic impetus to collect it.
“We should not forget that plastic is a fantastic material – it gives us products that we could otherwise only dream of. The problem is that it is manufactured at such low cost, that it has been cheaper to produce new plastics from oil and fossil gas than from reusing plastic waste,” says Henrik Thunman.
Now, through experimenting with chemical recovery via steam cracking of plastic, the researchers have developed an efficient process for turning used plastics into plastics of virgin quality.
“Through finding the right temperature – which is around 850 degrees Celsius – and the right heating rate and residence time, we have been able to demonstrate the proposed method at a scale where we turn 200 kg of plastic waste an hour into a useful gas mixture. That can then be recycled at the molecular level to become new plastic materials of virgin quality,” says Henrik Thunman.
The experiments were carried out at the Chalmers Power Central facility in Gothenburg.
In 2015, around 350 million tonnes of plastic waste were generated worldwide. In total, 14 per cent was collected for material recovery – 8 per cent was recycled into plastic of lower quality, and 2 per cent to plastics of similar quality as the original. Around 4 per cent was lost in the process.
Overall, around 40 per cent of global plastic waste in 2015 was processed after collection, mainly through incineration for energy recovery or volume reduction – releasing carbon dioxide into the atmosphere.
The rest – about 60 per cent – went to landfill. Only around 1 per cent was left uncollected and leaked into natural environments. Though only a small percentage, this nevertheless represents a significant environmental problem, since the amount of plastic waste is so high overall, and since the natural degradation of plastic is so slow, it accumulates over time.
The current model for recycling plastic tends to follow what is known as the ‘waste hierarchy’. This means the plastic is repeatedly degraded, to lower and lower quality before finally being burned for energy recovery.
“Instead of this, we focused on capturing the carbon atoms from the collected plastic and using them to create new plastic of original quality – that is, back to the top of the waste hierarchy, creating real circularity.”
Today, brand new plastics are made by shattering fossil oil and gas fractions in a device known as a ‘cracker’ in petrochemical plants. Inside the cracker, building blocks consisting of simple molecules are created. These can then be combined in many different configurations, resulting in the enormous variety of plastics we see in our society.
To do the same from collected plastics, new processes need to be developed. What the Chalmers researchers now present are the technical aspects of how such a process could be designed and integrated into existing petrochemical plants, in a cost-effective way. Eventually, this kind of development could enable a hugely significant transformation of today’s petrochemical plants into recycling refineries of the future.
The researchers are continuing their work on the process.
“We are now moving on from the initial trials, which aimed to demonstrate the feasibility of the process, to focusing on developing more detailed understanding. This knowledge is needed to scale up the process from a few tonnes of plastic a day, to hundreds of tonnes. That is when it becomes commercially interesting,” says Henrik Thunman.
The Latest on: Recycling plastics
via Google News
The Latest on: Recycling plastics
- Single-stream recycling begins in Marquette Countyon November 23, 2020 at 12:45 pm
SANDS TOWNSHIP, Mich. (WLUC) - For most recycling in the U.P., plastics get collected one week and paper the next. Those days are over in Marquette County, under the new single-stream system. The ...
- Global Plastic Recycling Machines Market 2020 to 2026 Top Countries Data, Growth Pattern and Analyzing Impacts Of COVID-19on November 23, 2020 at 4:51 am
The latest market research report titled Global Plastic Recycling Machines Market 2020 by Manufacturers, Regions, Type and Application, Forecast to 2026 reveals the overview of the global industry, ...
- Audi explores chemical recycling of automotive plasticson November 23, 2020 at 4:02 am
A joint project between automaker Audi and the industrial resource strategies think tank at Karlsruhe Institute for Technology (KIT) is aimed at finding an alternative to energy recovery as an ...
- Op-Ed: Plastic recycling and new opportunities for an old problemon November 23, 2020 at 1:30 am
The world produces 381 million tons of plastic waste every year. That figure is set to double by 2034. The first synthetic plastic was produced in 1907, marking ...
- New solvent-based recycling process could cut down on millions of tons of plastic wasteon November 20, 2020 at 11:12 am
Multilayer plastic materials are ubiquitous in food and medical supply packaging, particularly since layering polymers can give those films specific properties, like heat resistance or oxygen and ...
- Plastics recycling, marine litter get attention at EPA summiton November 18, 2020 at 9:09 am
Challenges with plastics recycling and efforts to address marine litter got some serious attention at the Environmental Protection Agency's national recycling summit this year, with some urging the ...
- Michelin and Pyrowave Join Forces to Industrialize an Innovative Plastic Waste Recycling Technologyon November 18, 2020 at 3:25 am
Michelin Group and the Canadian firm Pyrowave join forces to accelerate time-to-market for an innovative plastic waste recycling technology.They ...
- Koch Modular Awarded Design and Construction of Plastics Recycling Planton November 17, 2020 at 6:11 am
Koch Modular Process Systems, LLC (Koch Modular) announced that on October 7th, it has been awarded by PureCycle Technologies, LLC ("PureCycle") the construction of their Phase II commercial recycled ...
- Roth CH Acquisition I to Combine With PureCycle Technologies, Accelerating a Revolution in Plastics Recycling Through Impact Investingon November 16, 2020 at 12:26 am
SOLVING THE MASSIVE ENVIRONMENTAL PROBLEM CREATED BY PLASTIC WASTE IN LANDFILLS AND OCEANS, ENABLING PARTNERS TO MEET SUSTAINABILITY GOALS A REVOLUTIONARY AND PROPRIETARY COST-EFFECTIVE METHOD TO ...
- City of Salisbury recycling to resume, excluding plasticson November 13, 2020 at 9:20 am
The city of Salisbury will resume its recycling services after nearly nine months on pause due to the coronavirus pandemic.
via Bing News