In order to create new and more efficient computers, medical devices, and other advanced technologies, researchers are turning to nanomaterials: materials manipulated on the scale of atoms or molecules that exhibit unique properties.
Graphene—a flake of carbon as thin as a single layer of atoms—is a revolutionary nanomaterial due to its ability to easily conduct electricity, as well as its extraordinary mechanical strength and flexibility. However, a major hurdle in adopting it for everyday applications is producing graphene at a large scale, while still retaining its amazing properties.
In a paper published in the journal ChemOpen, Anne S. Meyer, an associate professor of biology at the University of Rochester, and her colleagues at Delft University of Technology in the Netherlands, describe a way to overcome this barrier. The researchers outline their method to produce graphene materials using a novel technique: mixing oxidized graphite with bacteria. Their method is a more cost-efficient, time-saving, and environmentally friendly way of producing graphene materials versus those produced chemically, and could lead to the creation of innovative computer technologies and medical equipment.
Graphene is extracted from graphite, the material found in an ordinary pencil. At exactly one atom thick, graphene is the thinnest—yet strongest—two-dimensional material known to researchers. Scientists from the University of Manchester in the United Kingdom were awarded the 2010 Nobel Prize in Physics for their discovery of graphene; however, their method of using sticky tape to make graphene yielded only small amounts of the material.
“For real applications you need large amounts,” Meyer says. “Producing these bulk amounts is challenging and typically results in graphene that is thicker and less pure. This is where our work came in.”
In order to produce larger quantities of graphene materials, Meyer and her colleagues started with a vial of graphite. They exfoliated the graphite—shedding the layers of material—to produce graphene oxide (GO), which they then mixed with the bacteria Shewanella. They let the beaker of bacteria and precursor materials sit overnight, during which time the bacteria reduced the GO to a graphene material.
“Graphene oxide is easy to produce, but it is not very conductive due to all of the oxygen groups in it,” Meyer says. “The bacteria remove most of the oxygen groups, which turns it into a conductive material.”
While the bacterially-produced graphene material created in Meyer’s lab is conductive, it is also thinner and more stable than graphene produced chemically. It can additionally be stored for longer periods of time, making it well suited for a variety of applications, including field-effect transistor (FET) biosensors and conducting ink. FET biosensors are devices that detect biological molecules and could be used to perform, for example, real-time glucose monitoring for diabetics.
“When biological molecules bind to the device, they change the conductance of the surface, sending a signal that the molecule is present,” Meyer says. “To make a good FET biosensor you want a material that is highly conductive but can also be modified to bind to specific molecules.” Graphene oxide that has been reduced is an ideal material because it is lightweight and very conductive, but it typically retains a small number of oxygen groups that can be used to bind to the molecules of interest.
The bacterially produced graphene material could also be the basis for conductive inks, which could, in turn, be used to make faster and more efficient computer keyboards, circuit boards, or small wires such as those used to defrost car windshields. Using conductive inks is an “easier, more economical way to produce electrical circuits, compared to traditional techniques,” Meyer says. Conductive inks could also be used to produce electrical circuits on top of nontraditional materials like fabric or paper.
“Our bacterially produced graphene material will lead to far better suitability for product development,” Meyer says. “We were even able to develop a technique of ‘bacterial lithography’ to create graphene materials that were only conductive on one side, which can lead to the development of new, advanced nanocomposite materials.”
The Latest on: Graphene
via Google News
The Latest on: Graphene
- Europe Graphene Oxide (GO) Market Overview and Scope 2020 to 2025on March 31, 2020 at 1:32 am
The Graphene Oxide (GO) Market report provides a detailed analysis of the dynamic of the market with extensive focus on secondary research. The report sheds light on the current situation of the ...
- Graphene device could harvest Wi-Fi signals for wireless chargingon March 29, 2020 at 8:03 pm
The team’s device is known as a terahertz rectifier and it’s made up of a small square of graphene with a layer of boron nitride underneath, flanked on both sides by an antenna. This antenna collects ...
- ORA Sound GQ Review: Graphene induced Soundstageon March 27, 2020 at 11:28 pm
ORA is one of the new players to come into the audio game, bringing with them Graphene technology - a new application to traditional dynamic drivers.
- Four-wave mixing of topological edge plasmons in graphene metasurfaceson March 27, 2020 at 11:59 am
See allHide authors and affiliations We study topologically protected four-wave mixing (FWM) interactions in a plasmonic metasurface consisting of a periodic array of nanoholes in a graphene sheet, ...
- Low-cost graphene-iron filters that selectively separate gaseous mixtureson March 27, 2020 at 6:47 am
UNSW researchers have shown how a new class of low-cost graphene-based membranes—a type of filter used in industry sectors that generate enormous mixed waste gases, such as solid plastic waste, ...
- Tunable macroscale structural superlubricity in two-layer graphene via strain engineeringon March 27, 2020 at 3:18 am
Superlubricity in macro-scale graphitic samples is hampered by commensurate stacking domains that prevent facile sliding between adjacent graphene layers. Here, the authors show the presence of ...
- ZEN Graphene Solutions Scaling up Graphene Productionon March 26, 2020 at 5:03 am
ZEN Graphene Solutions Ltd.(ZEN) ("ZEN" or the "Company") has commenced scale-up and engineering studies on processes for the production of Albany Pure ™ Graphene products at the Company's research ...
- Graphene for remote wound monitoringon March 25, 2020 at 7:26 am
French scientists at the Neel Institute have produced a graphene patch that records the condition of chronic wounds, such as ulcers suffered by the elderly or those with diabetes, at any time. The ...
- Mid- to long-wave infrared computational spectroscopy with a graphene metasurface modulatoron March 25, 2020 at 3:15 am
In recent years there has been much interest concerning the development of modulators in the mid- to long-wave infrared, based on emerging materials such as graphene. These have been frequently ...
- Graphene-based bandage designed for remote monitoring of woundson March 24, 2020 at 10:52 am
A new bandage is designed to keep physicians in the loop, via everyone's favorite wonder material – graphene. The device is being developed by scientists at biotech startup Grapheal, a spin-off ...
via Bing News