In order to create new and more efficient computers, medical devices, and other advanced technologies, researchers are turning to nanomaterials: materials manipulated on the scale of atoms or molecules that exhibit unique properties.
Graphene—a flake of carbon as thin as a single layer of atoms—is a revolutionary nanomaterial due to its ability to easily conduct electricity, as well as its extraordinary mechanical strength and flexibility. However, a major hurdle in adopting it for everyday applications is producing graphene at a large scale, while still retaining its amazing properties.
In a paper published in the journal ChemOpen, Anne S. Meyer, an associate professor of biology at the University of Rochester, and her colleagues at Delft University of Technology in the Netherlands, describe a way to overcome this barrier. The researchers outline their method to produce graphene materials using a novel technique: mixing oxidized graphite with bacteria. Their method is a more cost-efficient, time-saving, and environmentally friendly way of producing graphene materials versus those produced chemically, and could lead to the creation of innovative computer technologies and medical equipment.
Graphene is extracted from graphite, the material found in an ordinary pencil. At exactly one atom thick, graphene is the thinnest—yet strongest—two-dimensional material known to researchers. Scientists from the University of Manchester in the United Kingdom were awarded the 2010 Nobel Prize in Physics for their discovery of graphene; however, their method of using sticky tape to make graphene yielded only small amounts of the material.
“For real applications you need large amounts,” Meyer says. “Producing these bulk amounts is challenging and typically results in graphene that is thicker and less pure. This is where our work came in.”
In order to produce larger quantities of graphene materials, Meyer and her colleagues started with a vial of graphite. They exfoliated the graphite—shedding the layers of material—to produce graphene oxide (GO), which they then mixed with the bacteria Shewanella. They let the beaker of bacteria and precursor materials sit overnight, during which time the bacteria reduced the GO to a graphene material.
“Graphene oxide is easy to produce, but it is not very conductive due to all of the oxygen groups in it,” Meyer says. “The bacteria remove most of the oxygen groups, which turns it into a conductive material.”
While the bacterially-produced graphene material created in Meyer’s lab is conductive, it is also thinner and more stable than graphene produced chemically. It can additionally be stored for longer periods of time, making it well suited for a variety of applications, including field-effect transistor (FET) biosensors and conducting ink. FET biosensors are devices that detect biological molecules and could be used to perform, for example, real-time glucose monitoring for diabetics.
“When biological molecules bind to the device, they change the conductance of the surface, sending a signal that the molecule is present,” Meyer says. “To make a good FET biosensor you want a material that is highly conductive but can also be modified to bind to specific molecules.” Graphene oxide that has been reduced is an ideal material because it is lightweight and very conductive, but it typically retains a small number of oxygen groups that can be used to bind to the molecules of interest.
The bacterially produced graphene material could also be the basis for conductive inks, which could, in turn, be used to make faster and more efficient computer keyboards, circuit boards, or small wires such as those used to defrost car windshields. Using conductive inks is an “easier, more economical way to produce electrical circuits, compared to traditional techniques,” Meyer says. Conductive inks could also be used to produce electrical circuits on top of nontraditional materials like fabric or paper.
“Our bacterially produced graphene material will lead to far better suitability for product development,” Meyer says. “We were even able to develop a technique of ‘bacterial lithography’ to create graphene materials that were only conductive on one side, which can lead to the development of new, advanced nanocomposite materials.”
The Latest on: Graphene
via Google News
The Latest on: Graphene
- Graphene: The More You Bend it, the Softer it Gets | IDTechEx Research Articleon November 18, 2019 at 2:59 pm
New research by engineers at the University of Illinois combines atomic-scale experimentation with computer modeling to determine how much energy it takes to bend multilayer graphene - a question that ...
- Wearable graphene sensors use ambient light to monitor healthon November 18, 2019 at 8:47 am
Graphene coated with nanoparticles has been used to make wearable light sensors that measure the human pulse and blood oxygen levels from ambient light passing through tissue, offering a potential ...
- FEATURE: Graphene revolution remains distant despite increasing affordabilityon November 18, 2019 at 5:21 am
Despite this we haven’t seen the revolution in super-strong and light materials that has sometimes been suggested. It has been suggested that graphene and carbon nanotubes (CNTs) could produce much ...
- Highly Luminescent Ternary Nanocomposite of Polyaniline, Silver Nanoparticles and Graphene Oxide Quantum Dotson November 18, 2019 at 2:11 am
In this work, ternary nanocomposite (NC) of high fluorescent polyaniline (PANI)/2-acrylamido-2-methylpropanesulfonic acid (AMPSA) capped silver nanoparticles (NPs)/graphene oxide quantum dots (PANI/Ag ...
- ZEN Graphene Solutions Reports on Multiple Intellectual Property Licensing Agreementson November 14, 2019 at 7:24 am
Thunder Bay, Ontario--(Newsfile Corp. - November 14, 2019) - ZEN Graphene Solutions Ltd. (TSXV:ZEN) ("ZEN" or the "Company") has signed the definitive graphene manufacturing process License Agreement ...
- Graphene: The more you bend it, the softer it getson November 14, 2019 at 12:49 am
New research by engineers at the University of Illinois combines atomic-scale experimentation with computer modeling to determine how much energy it takes to bend multilayer graphene—a question that ...
- Business of the Year spotlight: Global Graphene Group (Manufacturing)on November 13, 2019 at 3:00 am
High-tech manufacturers are flourishing in Dayton, and one advanced materials company is leading the pack. Global Graphene Group (G3) is in growth mode — and unsurprisingly so. The company operates ...
- The next graphene? Shiny and magnetic, a new form of pure carbon dazzles with potentialon November 12, 2019 at 2:00 pm
A “happy accident” has yielded a new, stable form of pure carbon made from cheap feedstocks, researchers say. Like diamond and graphene, two other guises of carbon, the material seems to have ...
- Fifteen years and a Nobel Prize later, graphene's creator is thinking even biggeron November 12, 2019 at 3:15 am
At an event in London to celebrate the 15 years that have passed since graphene was discovered by Andre Geim and Konstantin Novoselov, the latter encouraged researchers to tackle issues ranging from ...
- Mycotoxin detection by graphene field-effect transistoron November 7, 2019 at 10:07 am
An international team of researchers from Biosense Institute (Serbia), National Research University of Electronic Technology (Russia), and The University of Texas at Austin (U.S.) has developed a ...
via Bing News