Rice University’s laser-induced graphene nanogenerators could power future wearables
Wearable devices that harvest energy from movement are not a new idea, but a material created at Rice University may make them more practical.
The Rice lab of chemist James Tour has adapted laser-induced graphene (LIG) into small, metal-free devices that generate electricity. Like rubbing a balloon on hair, putting LIG composites in contact with other surfaces produces static electricity that can be used to power devices.
Lab video demonstrates that repeatedly hitting a folded triboelectric generator produced enough energy to power a series of attached light-emitting diodes. The test showed how generators based on laser-induced graphene could be used to power wearable sensors and electronics with human movement. Courtesy of the Tour Group
For that, thank the triboelectric effect, by which materials gather a charge through contact. When they are put together and then pulled apart, surface charges build up that can be channeled toward power generation.
In experiments, the researchers connected a folded strip of LIG to a string of light-emitting diodes and found that tapping the strip produced enough energy to make them flash. A larger piece of LIG embedded within a flip-flop let a wearer generate energy with every step, as the graphene composite’s repeated contact with skin produced a current to charge a small capacitor.
“This could be a way to recharge small devices just by using the excess energy of heel strikes during walking, or swinging arm movements against the torso,” Tour said.
The project is detailed in the American Chemical Society journal ACS Nano.
LIG is a graphene foam produced when chemicals are heated on the surface of a polymer or other material with a laser, leaving only interconnected flakes of two-dimensional carbon. The lab first made LIG on common polyimide, but extended the technique to plants, food, treated paper and wood.
The lab turned polyimide, cork and other materials into LIG electrodes to see how well they produced energy and stood up to wear and tear. They got the best results from materials on the opposite ends of the triboelectric series, which quantifies their ability to generate static charge by contact electrification.
In the folding configuration, LIG from the tribo-negative polyimide was sprayed with a protecting coating of polyurethane, which also served as a tribo-positive material. When the electrodes were brought together, electrons transferred to the polyimide from the polyurethane. Subsequent contact and separation drove charges that could be stored through an external circuit to rebalance the built-up static charge. The folding LIG generated about 1 kilovolt, and remained stable after 5,000 bending cycles.
The best configuration, with electrodes of the polyimide-LIG composite and aluminum, produced voltages above 3.5 kilovolts with a peak power of more than 8 milliwatts.
“The nanogenerator embedded within a flip-flop was able to store 0.22 millijoules of electrical energy on a capacitor after a 1-kilometer walk,” said Rice postdoctoral researcher Michael Stanford, lead author of the paper. “This rate of energy storage is enough to power wearable sensors and electronics with human movement.”
Learn more: Flexible generators turn movement into energy
The Latest on: Laser-induced graphene nanogenerators
via Google News
The Latest on: Laser-induced graphene nanogenerators
- Unlocking The Potential Of Grapheneon November 20, 2019 at 4:00 pm
nanogenerators, solar cells, water splitting, hydrogen energy, water remediation and environmental monitoring. El-Kady has co-authored 17 US and international patents and 45+ papers in prestigious ...
- Graphene filter grabs bacteria to kill them with a zapon October 8, 2019 at 5:22 am
Laser-induced graphene (LIG) is a conductive foam of pure ... has led to a range of applications for electronics, triboelectric nanogenerators, composites, electrocatalysis, and even art. Adapting it ...
- Laser-made graphene enables simple, low-cost nanogeneratoron June 21, 2019 at 7:29 am
Chemistry matters. Join us to get the news you need. Yes! I want to get the latest chemistry news from C&EN in my inbox every week. ACS values your privacy. By submitting your information, you are ...
- Laser-induced graphene composites are eminently wearableon June 14, 2019 at 12:45 am
As a proof-of-concept, the researchers fabricated a stretchable micro-supercapacitor (S-MSC) demonstrating the highest capacitance reported for a graphene-based highly stretchable MSC to date. This ...
- Body-Worn Electric Generator to Power Medical Implants, Wearable Deviceson June 4, 2019 at 6:15 am
An announcement from Rice University provides some details about the underlying technology: LIG is a graphene foam produced when chemicals are heated on the surface of a polymer or other material with ...
- Flexible generators turn movement into energyon June 3, 2019 at 5:06 am
Tiny graphene-based nanogenerators could be used to power future wearable technology researchers in the US have claimed. Developed by a group at Rice University in Texas the devices exploit the ...
- Flexible generators turn movement into energyon May 31, 2019 at 1:51 pm
Researchers have produced triboelectric nanogenerators with laser-induced graphene. The flexible devices turn movement into electrical energy and could enable wearable, self-powered sensors and ...
- Flexible graphene nanogenerators turn movement into energyon May 31, 2019 at 1:43 pm
The project is detailed in the American Chemical Society journal ACS Nano ("Laser-Induced Graphene Triboelectric Nanogenerators"). Lab video demonstrates that repeatedly hitting a folded triboelectric ...
- Laser-induced graphene gets tough, with helpon February 11, 2019 at 4:00 pm
Laser-induced graphene combines with many materials to make tough, conductive composites for wearable electronics, anti-icing, antimicrobial applications, sensors and water treatment. Laser-induced ...
- Interface-mediated hygroelectric generator with an output voltage approaching 1.5 voltson October 9, 2018 at 2:37 am
Here, using a synergy between a hygroscopic bulk graphene oxide with a heterogeneous structure and interface mediation between electrodes/materials with Schottky junctions, we develop a ...
via Bing News