Techniques could lead to personalized wearable and implantable devices.
Hearing aids, dental crowns, and limb prosthetics are some of the medical devices that can now be digitally designed and customized for individual patients, thanks to 3-D printing. However, these devices are typically designed to replace or support bones and other rigid parts of the body, and are often printed from solid, relatively inflexible material.
Now MIT engineers have designed pliable, 3-D-printed mesh materials whose flexibility and toughness they can tune to emulate and support softer tissues such as muscles and tendons. They can tailor the intricate structures in each mesh, and they envision the tough yet stretchy fabric-like material being used as personalized, wearable supports, including ankle or knee braces, and even implantable devices, such as hernia meshes, that better match to a person’s body.
As a demonstration, the team printed a flexible mesh for use in an ankle brace. They tailored the mesh’s structure to prevent the ankle from turning inward — a common cause of injury — while allowing the joint to move freely in other directions. The researchers also fabricated a knee brace design that could conform to the knee even as it bends. And, they produced a glove with a 3-D-printed mesh sewn into its top surface, which conforms to a wearer’s knuckles, providing resistance against involuntary clenching that can occur following a stroke.
“This work is new in that it focuses on the mechanical properties and geometries required to support soft tissues,” says Sebastian Pattinson, who conducted the research as a postdoc at MIT.
Pattinson, now on the faculty at Cambridge University, is the lead author of a study published today in the journal Advanced Functional Materials. His MIT co-authors include Meghan Huber, Sanha Kim, Jongwoo Lee, Sarah Grunsfeld, Ricardo Roberts, Gregory Dreifus, Christoph Meier, and Lei Liu, as well as Sun Jae Professor in Mechanical Engineering Neville Hogan and associate professor of mechanical engineering A. John Hart.
Riding collagen’s wave
The team’s flexible meshes were inspired by the pliable, conformable nature of fabrics.
“3-D-printed clothing and devices tend to be very bulky,” Pattinson says. “We were trying to think of how we can make 3-D-printed constructs more flexible and comfortable, like textiles and fabrics.”
Pattinson found further inspiration in collagen, the structural protein that makes up much of the body’s soft tissues and is found in ligaments, tendons, and muscles. Under a microscope, collagen can resemble curvy, intertwined strands, similar to loosely braided elastic ribbons. When stretched, this collagen initially does so easily, as the kinks in its structure straighten out. But once taut, the strands are harder to extend.
Inspired by collagen’s molecular structure, Pattinson designed wavy patterns, which he 3-D-printed using thermoplastic polyurethane as the printing material. He then fabricated a mesh configuration to resemble stretchy yet tough, pliable fabric. The taller he designed the waves, the more the mesh could be stretched at low strain before becoming more stiff — a design principle that can help to tailor a mesh’s degree of flexibility and helped it to mimic soft tissue.
The researchers printed a long strip of the mesh and tested its support on the ankles of several healthy volunteers. For each volunteer, the team adhered a strip along the length of the outside of the ankle, in an orientation that they predicted would support the ankle if it turned inward. They then put each volunteer’s ankle into an ankle stiffness measurement robot — named, logically, Anklebot — that was developed in Hogan’s lab. The Anklebot moved their ankle in 12 different directions, and then measured the force the ankle exerted with each movement, with the mesh and without it, to understand how the mesh affected the ankle’s stiffness in different directions.
In general, they found the mesh increased the ankle’s stiffness during inversion, while leaving it relatively unaffected as it moved in other directions.
“The beauty of this technique lies in its simplicity and versatility. Mesh can be made on a basic desktop 3-D printer, and the mechanics can be tailored to precisely match those of soft tissue,” Hart says.
Stiffer, cooler drapes
The team’s ankle brace was made using relatively stretchy material. But for other applications, such as implantable hernia meshes, it might be useful to include a stiffer material, that is at the same time just as conformable. To this end, the team developed a way to incorporate stronger and stiffer fibers and threads into a pliable mesh, by printing stainless steel fibers over regions of an elastic mesh where stiffer properties would be needed, then printing a third elastic layer over the steel to sandwich the stiffer thread into the mesh.
The combination of stiff and elastic materials can give a mesh the ability to stretch easily up to a point, after which it starts to stiffen, providing stronger support to prevent, for instance, a muscle from overstraining.
The team also developed two other techniques to give the printed mesh an almost fabric-like quality, enabling it to conform easily to the body, even while in motion.
“One of the reasons textiles are so flexible is that the fibers are able to move relative to each other easily,” Pattinson says. “We also wanted to mimic that capability in the 3-D-printed parts.”
In traditional 3-D printing, a material is printed through a heated nozzle, layer by layer. When heated polymer is extruded it bonds with the layer underneath it. Pattinson found that, once he printed a first layer, if he raised the print nozzle slightly, the material coming out of the nozzle would take a bit longer to land on the layer below, giving the material time to cool. As a result, it would be less sticky. By printing a mesh pattern in this way, Pattinson was able to create a layers that, rather than being fully bonded, were free to move relative to each other, and he demonstrated this in a multilayer mesh that draped over and conformed to the shape of a golf ball.
Finally, the team designed meshes that incorporated auxetic structures — patterns that become wider when you pull on them. For instance, they were able to print meshes, the middle of which consisted of structures that, when stretched, became wider rather than contracting as a normal mesh would. This property is useful for supporting highly curved surfaces of the body. To that end, the researchers fashioned an auxetic mesh into a potential knee brace design and found that it conformed to the joint.
“There’s potential to make all sorts of devices that interface with the human body,” Pattinson says. Surgical meshes, orthoses, even cardiovascular devices like stents — you can imagine all potentially benefiting from the kinds of structures we show.”
The Latest on: 3D printing
via Google News
The Latest on: 3D printing
- Global Orthopedic 3D Printing Devices Market 2019-2023 | Evolving Opportunities With 3D Systems and EnvisionTEC | Technavioon December 13, 2019 at 4:04 pm
The global orthopedic 3D printing devices market is poised to grow by USD 1.24 billion during 2019-2023, progressing at a CAGR of nearly 26% during the forecast period. Request Free Sample Pages This ...
- Advancements in 3D Printing Technology Bring Promise to Orthopaedic Careon December 13, 2019 at 4:04 pm
Dec. 13, 2019 /PRNewswire/ -- It is no secret that technology is transforming the healthcare industry at rapid speed. The idea of 3D printing a patient's specific fracture pattern or bone pathology on ...
- Use of 3D printing in andrological surgery: what are the new perspectiveson December 13, 2019 at 7:19 am
All prices are NET prices. VAT will be added later in the checkout. Schubert C, van Langeveld MC, Donoso LA. Innovations in 3D printing: a 3D overview from optics to organs. Br J Ophthalmol.
- Top 6 Most Amazing Ways 3D Printing Is Now Used In Practiceon December 12, 2019 at 9:33 pm
Even though 3D printing got its start in the 1980s when Chuck Hull designed and printed a small cup, it’s been in the last few years that the printers became cheaper to produce and therefore used in a ...
- 3D Printing Automotive Market is Booming Worldwide with Projected CAGR of 29.36% | 3D Systems, Stratasys, Optomec, ExOne, Arcamon December 12, 2019 at 2:33 pm
Dec 12, 2019 (HTF Market Intelligence via COMTEX) -- Advance Market Analytics recently introduced Global 3D Printing Automotive Market study with in-depth overview, describing about the Product / ...
- Gnfei Technology’s UV 3D Printer Designed to Print on Cylindrical Objectson December 12, 2019 at 8:46 am
It takes 178 seconds in printing an A4 size image on a cylindrical surface. The company’s UV flatbed printer allows photo grade printing on the surface of a bottle with 3D, emboss and HD effects. The ...
- A new 3D printing database helps broken toys avoid the landfillon December 11, 2019 at 3:37 pm
Are you a print subscriber? Activate your account. By Garett Sloane - 1 hour 36 min ago By Duran Inci - 4 hours 2 min ago By Alexandra Jardine - 7 hours 3 min ago 18 hours 7 min ago By Garett ...
- Opportunity Knocks: A DIY lab with a 3D printer, laser cutter, and more opens in Neenahon December 11, 2019 at 8:49 am
It makes sense that Neenah is welcoming a business called Cre8Lab. As USA TODAY NETWORK-Wisconsin explored earlier this year with our "How we shop" series, it seems more consumers are preferring to ...
- 3D printing is making heart surgery on children saferon December 11, 2019 at 8:24 am
A UK charity is providing funding for a highly innovative project which uses 3D printing to change the way heart surgery is performed on children for the better. The Hampshire-based charity, Wessex ...
- Global 3D Printing Materials Market Report 2019: $4.1 Billion Trends, Competitive Analysis & Forecast to 2024 - ResearchAndMarkets.comon December 10, 2019 at 10:00 am
DUBLIN--(BUSINESS WIRE)--The "3D Printing Materials Market Report: Trends, Forecast and Competitive Analysis" report has been added to ResearchAndMarkets.com's offering. The 3D printing materials ...
via Bing News