Energy from seawater: power generator autonomously switches between two functional modes
Underwater vehicles, diving robots, and detectors require their own energy supply to operate for long periods independent of ships. A new, inexpensive system for the direct electrochemical extraction of energy from seawater offers the advantage of also being able to handle short spikes in power demand, while maintaining longer term steady power. To do so, the system can autonomously switch between two modes of operation, as researchers report in the journal Angewandte Chemie.
Charting submarine landforms, currents, and temperatures, and inspecting and repairing pipelines and deep-sea cables are just a few examples of tasks carried out autonomously by underwater devices in the depths of the ocean. Under these extreme conditions, the challenge for power generators is to produce both a high energy density (long run time with basic power use) and high power density (short-term high current flow) for activities such as rapid movement or action of a gripper.
Liang Tang, Hu Jiang, and Ming Hu and their team from the East China Normal University in Shanghai, Shanghai University, and the Chinese Research Academy of Environmental Sciences in Beijing, China, have taken inspiration from marine organisms that can switch their cell respiration between aerobic and anaerobic modes by using different materials as electron acceptors. The researchers have designed a new power generator that works by the same principles.
The key to the discovery is a cathode made of Prussian blue, an open framework structure with cyanide ions as “struts” and iron ions as “nodes”, which can easily accept and release electrons. When combined with a metal anode, this structure can be used to generate electricity from seawater.
If the power demand is small, the electrons flowing into the cathode are transferred directly to dissolved oxygen. Because dissolved oxygen in seawater is inexhaustible, power at low current can theoretically be provided for an unlimited time. However, the concentration of dissolved oxygen is low. When the power demand, and thus current, are sharply increased, there is not enough oxygen at the cathode to immediately take up all of the incoming electrons. The Prussian blue must therefore store these electrons by reducing the oxidation state of the iron atoms from +3 to +2. To maintain a charge balance, positively charged sodium ions lodge within the framework. Because these are present in high concentration in seawater, many sodium ions—and therefore many electrons—can be absorbed in a short time. When the current demand slows down, electrons are transferred to oxygen once again, oxygen regenerates the framework, Fe2+ is oxidized to Fe3+, and the sodium ions depart.
This new system is very stable in corrosive seawater and can withstand numerous mode switches. It ran continuously for four days in its high-energy mode without losing power. The high-power mode was able to supply 39 light-emitting diodes and a propeller.
Learn more: Underwater Power Generation
The Latest on: Energy from seawater
via Google News
The Latest on: Energy from seawater
- Qeeri develops new technology to remove oil from seawateron August 11, 2020 at 11:06 am
Scientists at the Qatar Environment and Energy Research Institute (Qeeri) at Hamad Bin Khalifa University (HBKU) have developed a new type of filtration technology which can remove small oil droplets ...
- Australia develops technology to make seawater drinkable within 30 minuteson August 10, 2020 at 11:54 pm
According to the Melbourne-based Monash University, the specially-designed filter is capable of generating hundreds of litres of drinkable water per day, and requires only direct sunlight to purify it ...
- Aussie scientists make seawater drinkable using sunlighton August 10, 2020 at 5:00 pm
Australian researchers have developed a technology that can turn seawater safe to drink in less than 30 minutes by using only a high-tech filter and direct sunlight.According to the Melbourne-based ...
- 'Light responsive' technology turns seawater into clean drinking water in less than 30 minuteson August 10, 2020 at 9:00 am
Australia-based researchers used a metal-organic framework (MOF), a type of lattice-like crystal, to desalinate water with sunlight.
- Sun, smarts and clean drinking wateron August 10, 2020 at 8:35 am
Now, in a new paper in the journal Nature Sustainability, a second team reports that it has been able to transform brackish water and seawater into clean drinking water in less than 30 minutes using a ...
- Researchers transform seawater into purified drinking water using sunlighton August 10, 2020 at 8:14 am
An efficient process for filtering and purifying salt water could help to provide billions with fresh drinking water ...
- Breakthrough technology purifies water using the power of sunlighton August 10, 2020 at 8:05 am
A research team, led by Australia's Monash University, has been able to transform brackish water and seawater into safe, clean drinking water in less than 30 minutes using metal-organic frameworks ...
- Scientists turn seawater into drinkable freshwater using metal compounds, sunlighton August 10, 2020 at 8:02 am
Researchers have successfully turned brackish water and seawater into clean, potable freshwater using metal-organic frameworks, MOFs, and sunlight.
- Saudi Arabia Might be Going Nuclear and The US Doesn't Like it!on August 9, 2020 at 4:04 am
According to a statement on the website of China Atomic Energy Authority (CNNC), "Beijing ... regarding research on uranium extraction from seawater with Saudi Arabia’s King Abdulaziz City ...
- Nuclear Energy for Non-Electric Applications Key for Climate Change Mitigationon August 7, 2020 at 9:35 am
Nuclear power accounts for around one-third of global low carbon electricity production. But in addition to powering millions of homes and businesses, nuclear power plants (NPPs) produce heat that can ...
via Bing News