Researchers have used a graphite coating that makes perovskite solar cells waterproof.
A cheaper, cleaner and more sustainable way of making hydrogen fuel from water using sunlight is a step closer thanks to new research from the University of Bath’s Centre for Sustainable Chemical Technologies.
With the pressure on global leaders to reduce carbon emissions significantly to solve a climate change emergency, there is an urgent need to develop cleaner energy alternatives to burning fossil fuels. Hydrogen is a zero carbon emission fuel alternative that can be used to power cars, producing only water as a waste product.
It can be made by splitting water into hydrogen and oxygen, however the process requires large amounts of electricity. Most electricity is made by burning methane so researchers at the University of Bath are developing new solar cells that use light energy directly to split water.
Most solar cells currently on the market are made of silicon, however they are expensive to make and require a lot of very pure silicon to manufacture. They are also quite thick and heavy, which limits their applications.
Perovskite solar cells, using materials with the same 3D structure as calcium titanium oxide, are cheaper to make, thinner and can be easily printed onto surfaces. They also work in low light conditions and can produce a higher voltage than silicon cells, meaning they could be used indoors to power devices without the need to plug into the mains.
The downside is they are unstable in water which presents a huge obstacle in their development and also limits their use for the direct generation of clean hydrogen fuels.
The team of scientists and chemical engineers, from the University of Bath’s Centre for Sustainable Chemical Technologies, has solved this problem by using a waterproof coating from graphite, the material used in pencil leads.
They tested the waterproofing by submerging the coated perovskite cells in water and using the harvested solar energy to split water into hydrogen and oxygen. The coated cells worked underwater for 30 hours – ten hours longer than the previous record.
After this period, the glue sandwiching the coat to the cells failed; the scientists anticipate that using a stronger glue could stabilise the cells for even longer.
Previously, alloys containing indium were used to protect the solar cells for water splitting, however indium is a rare metal and is therefore expensive and the mining process to obtain it is not sustainable.
The Bath team instead used commercially available graphite, which is very cheap and much more sustainable than indium.
Dr Petra Cameron, Senior Lecturer in Chemistry, said: “Perovskite solar cell technology could make solar energy much more affordable for people and allow solar cells to be printed onto roof tiles. However at the moment they are really unstable in water – solar cells are not much use if they dissolve in the rain!’
“We’ve developed a coating that could effectively waterproof the cells for a range of applications. The most exciting thing about this is that we used commercially available graphite, which is much cheaper and more sustainable than the materials previously tried.”
Perovskite solar cells produce a higher voltage than silicon based cells, but still not enough needed to split water using solar cells alone. To solve this challenge, the team is adding catalysts to reduce the energy requirement needed to drive the reaction.
Isabella Poli, Marie Curie FIRE Fellow and PhD student from the Centre for Sustainable Chemical Technologies, said: “Currently hydrogen fuel is made by burning methane, which is neither clean nor sustainable.
“But we hope that in the future we can create clean hydrogen and oxygen fuels from solar energy using perovskite cells.”
Learn more: Solar-powered hydrogen fuels a step closer
The Latest on: Perovskite solar cells
via Google News
The Latest on: Perovskite solar cells
- Hot electron capture boosts perovskite solar cellson November 18, 2019 at 8:19 am
Hot electron capture would be one way to improve the efficiency of Perovskite solar cells, by directing the energy of those electrons to the external circuit, rather than allowing it to become heat ...
- Scientists show how perovskite solar cells can capture more electricityon November 18, 2019 at 7:16 am
Scientists have developed a method to analyze which pairs of materials in next-generation perovskite solar cells will harvest the most energy. Scientists from Nanyang Technological University, ...
- Spray-on Solar Cells Being Developed by College Studentson November 15, 2019 at 1:33 pm
The process involves a substance called perovskite ink, which is sprayed on a surface and creates a thin film that harvests light. This process is far cheaper than making a traditional, silicon-based ...
- 'Messy' Production of Perovskite Material Increases Solar Efficiency | IDTechEx Research Articleon November 13, 2019 at 2:32 pm
Discovery means simpler and cheaper manufacturing methods are actually beneficial for the material's use in next-generation solar cells or LED lighting. Scientists at the University of Cambridge ...
- New material to pave the way for lead-free solar panelson November 13, 2019 at 9:35 am
Over the last decade, the quest to build a better, more efficient solar panel has centered on a mineral called perovskite. Solar panels made using the calcium titanium oxide mineral capture up to 28 ...
- Perovskite solar cells: Possible aspects of high efficiency uncoveredon November 13, 2019 at 9:01 am
Solar cells based on perovskites have reached enormously high efficiencies within only a few years. Those with hybrid halide perovskite, i.e. materials containing inorganic and organic components, ...
- New breakthrough in solar cell material is thanks to a 'sandwich'on November 12, 2019 at 11:03 pm
At the moment, current solar cells only capture 15% to 18% of the solar energy on average, but in 2009 solar cells started incorporating the mineral perovskite. Since then, researchers have been ...
- 'Messy' production of perovskite material increases solar cell efficiencyon November 11, 2019 at 8:02 am
Scientists at the University of Cambridge studying perovskite materials for next generation solar cells and flexible LEDs have discovered that they can be more efficient when their chemical ...
- Inorganic perovkite solar cell lasts longeron November 7, 2019 at 8:14 am
Perovskite solar cells can be made in open air and “last for months rather than days with a solar conversion efficiency slightly above 12%” according to Rice University if some of the Pb is replaced ...
- Prices are down and capacity is up as solar and wind take holdon November 6, 2019 at 9:12 pm
Silicon technology, which currently dominates solar power generation, is reaching its technical limits, says Jao van de Lagemaat, director of the chemistry and nanoscience centre at the US-based ...
via Bing News