Hydrogen is a clean and renewable energy carrier that can power vehicles, with water as the only emission. Unfortunately, hydrogen gas is highly flammable when mixed with air, so very efficient and effective sensors are needed. Now, researchers from Chalmers University of Technology, Sweden, present the first hydrogen sensors ever to meet the future performance targets for use in hydrogen powered vehicles.
?The researchers’ ground-breaking results were recently published in the prestigious scientific journal Nature Materials.? The discovery is an optical nanosensor encapsulated in a plastic material. The sensor works based on an optical phenomenon – a plasmon – which occurs when metal nanoparticles are illuminated and capture visible light. The sensor simply changes colour when the amount of hydrogen in the environment changes.
The plastic around the tiny sensor is not just for protection, but functions as a key component. It increases the sensor’s response time by accelerating the uptake of the hydrogen gas molecules into the metal particles where they can be detected. At the same time, the plastic acts as an effective barrier to the environment, preventing any other molecules from entering and deactivating the sensor. The sensor can therefore work both highly efficiently and undisturbed, enabling it to meet the rigorous demands of the automotive industry – to be capable of detecting 0.1 percent hydrogen in the air in less than a second.
“We have not only developed the world’s fastest hydrogen sensor, but also a sensor that is stable over time and does not deactivate. Unlike today’s hydrogen sensors, our solution does not need to be recalibrated as often, as it is protected by the plastic,” says Ferry Nugroho, a researcher at the Department of Physics at Chalmers.
It was during his time as a PhD student that Ferry Nugroho and his supervisor Christoph Langhammer realised that they were on to something big. After reading a scientific article stating that no one had yet succeeded in achieving the strict response time requirements imposed on hydrogen sensors for future hydrogen cars, they tested their own sensor. They realised that they were only one second from the target – without even trying to optimise it. The plastic, originally intended primarily as a barrier, did the job better than they could have imagined, by also making the sensor faster. The discovery led to an intense period of experimental and theoretical work.
“In that situation, there was no stopping us. We wanted to find the ultimate combination of nanoparticles and plastic, understand how they worked together and what made it so fast. Our hard work yielded results. Within just a few months, we achieved the required response time as well as the basic theoretical understanding of what facilitates it,” says Ferry Nugroho.
Detecting hydrogen is challenging in many ways. The gas is invisible and odourless, but volatile and extremely flammable. It requires only four percent hydrogen in the air to produce oxyhydrogen gas, sometimes known as knallgas, which ignites at the smallest spark. In order for hydrogen cars and the associated infrastructure of the future to be sufficiently safe, it must therefore be possible to detect extremely small amounts of hydrogen in the air. The sensors need to be quick enough that leaks can be rapidly detected before a fire occurs.
?“It feels great to be presenting a sensor that can hopefully be a part of a major breakthrough for hydrogen-powered vehicles. The interest we see in the fuel cell industry is inspiring,” says Christoph Langhammer, Professor at Chalmers Department of Physics.
Although the aim is primarily to use hydrogen as an energy carrier, the sensor also presents other possibilities. Highly efficient hydrogen sensors are needed in the electricity network industry, the chemical and nuclear power industry, and can also help improve medical diagnostics.
“The amount of hydrogen gas in our breath can provide answers to, for example, inflammations and food intolerances. We hope that our results can be used on a broad front. This is so much more than a scientific publication,” says Christoph Langhammer.
In the long run, the hope is that the sensor can be manufactured in series in an efficient manner, for example using 3D printer technology.
The Latest on: Hydrogen sensor
via Google News
The Latest on: Hydrogen sensor
- NASA finishes big SLS tank tests, says design is flight readyon October 16, 2019 at 3:47 am
Al.com reports engineers have tested the SLS tank continuously on Redstone arsenal since January. The tanks were lifted into a 221-foot-high stand, 2,500 sensors were installed, and for some tests, 80 ...
- Inside the fuel cell: Imaging method promises industrial insighton October 15, 2019 at 9:46 am
Hydrogen-containing substances are important for many industries ... This included collaborations with neutron detector experts at the University of California, Berkeley and theoretical simulation ...
- NASA finishes big SLS tank tests, says design is good to flyon October 15, 2019 at 9:35 am
How do you test a tank 130 feet tall? First, lift it into a stand built for that purpose (but with enough design flexibility it can be used again), install 2,500 sensors on the tank to measure strain ...
- Apocalypse scenarios, hydrogen police cars, VR mat and more: best of the week's newson October 11, 2019 at 7:54 am
Maybe this mat could help, as it provides you with a full digital space to walk around in and sensors that will tell you when you’re about to smash your ... The Met’s 21-strong fleet of ...
- Hydrogen and Nitrogen Gas Generators in GC-MS and LC-MSon October 10, 2019 at 7:41 am
If hydrogen generators can improve GC-MS in terms of cost, efficiency, and safety, then what about gas supply solutions for LC-MS? Although LC-MS is used to examine liquid or solid analytes, a gas ...
- NASA awards $10M to Jeff Bezos’ Blue Origin for hydrogen-oxygen storage techon September 28, 2019 at 12:27 am
Blue Origin’s proposed Blue Moon lunar lander could use the hydrogen and oxygen not only for its BE-7 rocket engine ... Luna Innovations is partnering with Sierra Nevada Corp., ILC Dover and Johnson ...
- Item #: 5100-21-IT Hydrogen Chloride Gas Sensor Moduleon September 25, 2019 at 5:00 pm
Calibration Accessories Gas Sensor Calibration Kit, Type A (CO, H 2 S) (1250-01) Gas Sensor Calibration Kit, Type B (SO 2, NO 2) (1250-02) Gas Sensor Calibration Kit, Type C (Cl 2, ClO 2) (1250-03) ...
- Hydrogen Sensor Market Emerging Trends, Technology and Growth 2019 to 2025on September 25, 2019 at 4:06 am
Sep 25, 2019 (HTF Market Intelligence via COMTEX) -- Global Hydrogen Sensor Market Report 2019 is latest research study released by HTF MI evaluating the market, highlighting opportunities, risk side ...
- IIT researchers develop material to detect hydrogen gas leakon September 4, 2019 at 5:00 pm
Researchers at Hyderabad and Jodhpur IITs have developed materials that can be used as sensors to detect hydrogen gas leaks. Since the gas is highly inflammable, the dangers of a leak too are real.
- IIT Jodhpur fabricates a highly sensitive hydrogen sensoron August 24, 2019 at 1:47 pm
A sensor that can detect hydrogen gas even when present at extremely low concentration of 1 part per million (ppm) has been developed by researchers at the Indian Institute of Technology (IIT) Jodhpur ...
via Bing News