Physicists at the University of Zurich have developed an amazingly simple device that allows heat to flow temporarily from a cold to a warm object without an external power supply. Intriguingly, the process initially appears to contradict the fundamental laws of physics.
If you put a teapot of boiling water on the kitchen table, it will gradually cool down. However, its temperature is not expected to fall below that of the table. It is precisely this everyday experience that illustrates one of the fundamental laws of physics – the second law of thermodynamics – which states that the entropy of a closed natural system must increase over time. Or, more simply put: Heat can flow by itself only from a warmer to a colder object, and not the other way round.
Cooling below room temperature
The results of a recent experiment carried out by the research group of Prof. Andreas Schilling in the Department of Physics at the University of Zurich (UZH) appear at first sight to challenge the second law of thermodynamics. The researchers managed to cool a nine-gram piece of copper from over 100°C to significantly below room temperature without an external power supply. “Theoretically, this experimental device could turn boiling water to ice, without using any energy,” says Schilling.
Creating oscillating heat currents
To achieve this, the researchers used a Peltier element, a component commonly used, for example, to cool minibars in hotel rooms. These elements can transform electric currents into temperature differences. The researchers had already used this type of element in previous experiments, in connection with an electric inductor, to create an oscillating heat current in which the flow of heat between two bodies perpetually changed direction. In this scenario, heat also temporarily flows from a colder to a warmer object so that the colder object is cooled down further. This kind of “thermal oscillating circuit” in effect contains a “thermal inductor”. It functions in the same way as an electrical oscillating circuit, in which the voltage oscillates with a constantly changing sign.
Laws of physics remain intact
Until now, Schilling’s team had only operated these thermal oscillating circuits using an energy source. The researchers have now shown for the first time that this kind of thermal oscillating circuit can also be operated “passively”, i.e. with no external power supply. Thermal oscillations still occurred and, after a while, heat flowed directly from the colder copper to a warmer heat bath with a temperature of 22°C, without being temporarily transformed into another form of energy. Despite this, the authors were also able to show that the process does not actually contradict any laws of physics. To prove it, they considered the change in entropy of the whole system and showed that it increased with time – fully in accordance with the second law of thermodynamics.
Potential application still a long way off
Although the team recorded a difference of only about 2°C compared to the ambient temperature in the experiment, this was mainly due to the performance limitations of the commercial Peltier element used. According to Schilling, it would be possible in theory to achieve cooling of up to -47°C under the same conditions, if the “ideal” Peltier element – yet to be invented – could be used: “With this very simple technology, large amounts of hot solid, liquid or gaseous materials could be cooled to well below room temperature without any energy consumption.”
The passive thermal circuit could also be used as often as desired, without the need to connect it to a power supply. However, Schilling admits that a large-scale application of the technique is still a long way off. One reason for this is that the Peltier elements currently available are not efficient enough. Furthermore, the current set-up requires the use of superconducting inductors to minimize electric losses.
Established perceptions challenged
The UZH physicist considers the work more significant than a mere “proof-of-principle” study: “At first sight, the experiments appear to be a kind of thermodynamic magic, thereby challenging to some extent our traditional perceptions of the flow of heat.”
The Latest on: Thermal oscillating circuit
via Google News
The Latest on: Thermal oscillating circuit
- Rediscover The Truly Tunable Hall Networkon March 29, 2020 at 5:00 pm
This thermal loop produces two effects ... Some intriguing history exists with these two oscillator circuits. Hewlett used the lamp filament to increase negative feedback to stabilize his Wien ...
- High-frequency rectification via chiral Bloch electronson March 27, 2020 at 11:59 am
Existing rectifiers operating at radio frequency are mostly based on electrical circuits with diodes ... characterizes the DC current generated by an external electric field oscillating at frequency ω ...
- NEET 2020 - 2021 Syllabus by NTA, Exam Pattern & Latest Updateson March 27, 2020 at 5:44 am
Heat, temperature, thermal expansion ... LC oscillations (qualitative treatment only), LCR series circuit, resonance; power in AC circuits, wattles current. • AC generator and transformer.
- A Ridiculous Way To Light An LED: Candle-poweron March 26, 2020 at 5:00 pm
[Fedetft] has an interesting project that combines two of those intriguing textbook references, he’s created a thermopile that lights an LED through an inverter whose oscillator is a tunnel diode.
- Stochastic Resonance in Insulator-Metal-Transition Systemson March 26, 2020 at 3:28 am
Stochastic resonance (SR) is an ingenious phenomenon observed in nature and in biological systems but has seen very few practical applications in engineering. It has been observed and analyzed in ...
- Thermal light tunnels its way into electricityon March 19, 2020 at 11:53 am
In these devices, incident oscillating ... circuit voltage that is substantially higher than the actual voltage induced by the IR radiation across the tunnel junction and overcomes the challenge of ...
- Understanding Closed-Loop Fan Speed Controlon March 16, 2020 at 5:00 pm
A Linear output can save cost by integrating the drive circuit, while a PWM output provides ... measurement can vary widely due to the IC's oscillator variation. When tight fan speed control ...
- Phase Noise in RF Oscillatorson February 20, 2018 at 2:09 am
The theoretical phase noise performance of an RF oscillator is governed by Leesons equation . This appendix provides further details of this model and its implications for oscillator circuit design ...
- Troubleshooting Tales: Persistence Pays Off for Our Contest Winneron August 3, 2017 at 12:35 pm
Dave Wright relates the issues that emerged with his “bargain” GPS-disciplined rubidium oscillator ... Yup, it was thermal. As long as the antenna was below 70ºF it worked ok, above that ...
- Dr Chris Oxleyon February 20, 2013 at 2:14 pm
Dr Chris Oxley's research work has spanned a large area in RF and microwave devices and circuits. It includes the trapped avalanche plasma trigger transit (TRAPATT), the impact ionization avalanche ...
via Bing News