Physicists at the University of Zurich have developed an amazingly simple device that allows heat to flow temporarily from a cold to a warm object without an external power supply. Intriguingly, the process initially appears to contradict the fundamental laws of physics.
If you put a teapot of boiling water on the kitchen table, it will gradually cool down. However, its temperature is not expected to fall below that of the table. It is precisely this everyday experience that illustrates one of the fundamental laws of physics – the second law of thermodynamics – which states that the entropy of a closed natural system must increase over time. Or, more simply put: Heat can flow by itself only from a warmer to a colder object, and not the other way round.
Cooling below room temperature
The results of a recent experiment carried out by the research group of Prof. Andreas Schilling in the Department of Physics at the University of Zurich (UZH) appear at first sight to challenge the second law of thermodynamics. The researchers managed to cool a nine-gram piece of copper from over 100°C to significantly below room temperature without an external power supply. “Theoretically, this experimental device could turn boiling water to ice, without using any energy,” says Schilling.
Creating oscillating heat currents
To achieve this, the researchers used a Peltier element, a component commonly used, for example, to cool minibars in hotel rooms. These elements can transform electric currents into temperature differences. The researchers had already used this type of element in previous experiments, in connection with an electric inductor, to create an oscillating heat current in which the flow of heat between two bodies perpetually changed direction. In this scenario, heat also temporarily flows from a colder to a warmer object so that the colder object is cooled down further. This kind of “thermal oscillating circuit” in effect contains a “thermal inductor”. It functions in the same way as an electrical oscillating circuit, in which the voltage oscillates with a constantly changing sign.
Laws of physics remain intact
Until now, Schilling’s team had only operated these thermal oscillating circuits using an energy source. The researchers have now shown for the first time that this kind of thermal oscillating circuit can also be operated “passively”, i.e. with no external power supply. Thermal oscillations still occurred and, after a while, heat flowed directly from the colder copper to a warmer heat bath with a temperature of 22°C, without being temporarily transformed into another form of energy. Despite this, the authors were also able to show that the process does not actually contradict any laws of physics. To prove it, they considered the change in entropy of the whole system and showed that it increased with time – fully in accordance with the second law of thermodynamics.
Potential application still a long way off
Although the team recorded a difference of only about 2°C compared to the ambient temperature in the experiment, this was mainly due to the performance limitations of the commercial Peltier element used. According to Schilling, it would be possible in theory to achieve cooling of up to -47°C under the same conditions, if the “ideal” Peltier element – yet to be invented – could be used: “With this very simple technology, large amounts of hot solid, liquid or gaseous materials could be cooled to well below room temperature without any energy consumption.”
The passive thermal circuit could also be used as often as desired, without the need to connect it to a power supply. However, Schilling admits that a large-scale application of the technique is still a long way off. One reason for this is that the Peltier elements currently available are not efficient enough. Furthermore, the current set-up requires the use of superconducting inductors to minimize electric losses.
Established perceptions challenged
The UZH physicist considers the work more significant than a mere “proof-of-principle” study: “At first sight, the experiments appear to be a kind of thermodynamic magic, thereby challenging to some extent our traditional perceptions of the flow of heat.”
The Latest on: Thermal oscillating circuit
via Google News
The Latest on: Thermal oscillating circuit
- What Is Silicon Germanium’s Place at the Semiconductor Table?on June 2, 2020 at 10:07 pm
Since then, circuit designers have discovered that this material is more efficient than silicon—in terms of power consumption and performance—while also increasing the frequency and oscillating ...
- The Engineer’s Guide To High-Quality PCB Designon June 2, 2020 at 5:00 pm
Virtually every electronic product is constructed with one or more printed-circuit boards (PCBs ... next in the process and determined based on thermal management, function, and electrical ...
- A Ridiculous Way To Light An LED: Candle-poweron May 31, 2020 at 5:00 pm
[Fedetft] has an interesting project that combines two of those intriguing textbook references, he’s created a thermopile that lights an LED through an inverter whose oscillator is a tunnel diode.
- Analog & Mixed Signal IP Coreon May 24, 2020 at 5:00 pm
The IGARFCS04A is a 16MHz resistance to frequency oscillator without external component ... IGATHMX01A is a voltage and temperature sensor which is built in an internal thermal diode and an ...
- Thermal Management: New Solutions for New Challengeson May 22, 2020 at 12:44 pm
Traditional thermal-management solutions rely on gap ... because we stopped using an internal oscillator required for the delay element to operate. Let’s consider the integrating RC element ...
- Linear LED driver for automotive lighting includes PWMon May 19, 2020 at 7:12 am
As well as thermal de-rating to increase reliability, protections include LED open detection, output short circuit protection ... and there is a built-in PWM oscillator that works with an external RC ...
- A new analytic approach for advanced jitter separationon May 12, 2020 at 11:18 am
This article describes a newly developed method for separating jitter components, providing electronic circuit designers with a powerful ... depends on the quality of the reference clock’s oscillator ...
- The Cheapest Crystal Ovenon May 4, 2020 at 5:00 pm
That’s a bit unconventional as far as thermal management goes, but the results speak for themselves: [Roman] can get a clock with this circuit accurate to a few seconds per year.
- Phase Noise in RF Oscillatorson February 20, 2018 at 2:09 am
The theoretical phase noise performance of an RF oscillator is governed by Leesons equation . This appendix provides further details of this model and its implications for oscillator circuit design ...
- RF Phase Detectors and Comparators Informationon February 11, 2018 at 6:52 am
RF phase detectors and comparators are circuits or instruments that provide a DC output voltage proportional to the difference in phase between two RF signals. They include local oscillator (LO ...
via Bing News