A self-cleaning device made of wood aims to make small-scale desalination more practical
About a billion people around the world lack access to safe drinking water. Desalinating salty water into drinkable water can help to fill this dangerous gap. But traditional desalination systems are far too expensive to install and operate in many locations, especially in low-income countries and remote areas.
Now researchers at the University of Maryland’s A. James Clark School of Engineering have demonstrated a successful prototype of one critical component for affordable small-scale desalination: an inexpensive solar evaporator, made of wood. The evaporator generates steam with high efficiency and minimal need for maintenance, says Liangbing Hu, associate professor of materials science and engineering and affiliate of the Maryland Energy Innovation Institute.
The design employs a technique known as interfacial evaporation, “which shows great potential in response to global water scarcity because of its high solar-to-vapor efficiency, low environmental impact, and portable device design with low cost,” Hu says. “These features make it suitable for off-grid water generation and purification, especially for low-income countries.”
Interfacial evaporators are made of thin materials that float on saline water. Absorbing solar heat on top, the evaporators continuously pull up the saline water from below and convert it to steam on their top surface, leaving behind the salt, explains Hu, who is senior author on a paper describing the work in Advanced Materials.
However, over time salt can build up on this evaporative surface, gradually degrading performance until it is removed, he says.
Hu and his colleagues minimized the need for this maintenance with a device made out of basswood that exploits the wood’s natural structure of the micron-wide channels that carry water and nutrients up the tree.
The researchers supplement these natural channels by drilling a second array of millimeter-wide channels through a thin cross-section of the wood, says Yudi Kuang, a visiting scholar and lead author on the paper. The investigators then briefly expose the top surface to high heat, which carbonizes the surface for greater solar absorption.
In operation, as the device absorbs solar energy, it draws up salty water through the wood’s natural micron-wide channels. Salt is spontaneously exchanged from these tiny channels through natural openings along their sides to the vastly wider drilled channels, and then easily dissolves back into the water below.
“In the lab, we have successfully demonstrated excellent anti-fouling in a wide range of salt concentrations, with stable steam generation with about 75% efficiency,” says Kuang.
“Using natural wood as the only starting material, the salt-rejecting solar evaporator is expected to be low-cost,” adds research associate Chaoji Chen. The evaporator approach also is effective in other types of wood with similar natural channels. The researchers now are optimizing their system for higher efficiency, lower capital cost, and integration with a steam condenser to complete the desalination cycle.
Hu’s lab also recently developed another solar-heated prototype device that takes advantage of carbonized wood’s ability to absorb and distribute solar energy–this one created to help clean up spills of hard-to-collect heavy oils. “Our carbonized wood material demonstrates rapid and efficient crude oil absorption, as well as low cost and scalable manufacturing potential,” says Kuang, lead author on a paper about the research in Advanced Functional Materials.
“Wood is an intriguing material scaffold, with its unique hierarchically porous structure, and it is a renewable, abundant and cost-effective resource,” Hu says. “In our lab, the fundamental understanding of biomaterials (especially wood) leads us to achieve extraordinary performance that is competitive with widely used but non-sustainable materials.”
Among other projects, his lab has created light and effective “nanowood” insulating materials. It also has engineered “super wood” that is 12 times stronger and 10 times tougher than natural wood, and potentially may replace steel, titanium or carbon fiber in certain applications, he says.
The Latest on: Solar evaporator
via Google News
The Latest on: Solar evaporator
- Best Solar Pool Coverson March 25, 2020 at 7:46 pm
It will also decrease water evaporation which will save you money in water and pool chemicals. This product is also very reasonably priced and comes with a 3-year warranty, so you can’t go wrong with ...
- Solar Device Generates Cooling Load Without Electricityon March 24, 2020 at 9:03 am
Cooling by water evaporation has always been known. As an example ... the difference in salinity between the two solutions can be continuously—and sustainably—restored using solar energy, as also ...
- A new low-cost solar technology for environmental coolingon March 23, 2020 at 12:19 pm
with this effect being further amplified thanks to the presence of different evaporation stages. Clearly, the salty water concentration will constantly decrease and the cooling effect will diminish ...
- Oil giants team up to float coastal solar visionon March 20, 2020 at 3:55 am
Advocates of the approach argue that it allows for significant solar capacity to be added close to population centres without impacting land use. Moreover, the panels tend to work more effectively ...
- Community Team Candidate Bernard Gillic wants an Isa solar legacyon March 15, 2020 at 7:00 pm
"There are so many solar choices out there at the moment and we would investigate all options, including putting solar on the shallower areas of Lake Moodarra, this could slow down evaporation of the ...
- Materials for solar-powered water evaporationon March 10, 2020 at 5:14 am
Solar-powered water evaporation — the extraction of vapour from liquid water using solar energy — provides the basis for the development of eco-friendly and cost-effective freshwater production.
- Super lightweight foam uses sunlight to harvest water from evaporationon March 9, 2020 at 10:41 pm
(Reprinted with permission by American Chemical Society) (click on image to enlarge) "We chose solar-induced evaporation as a strategy to address the water scarcity issue because the Sun has so much ...
- Efficient tandem solar cells with solution-processed perovskite on textured crystalline siliconon March 5, 2020 at 11:49 am
2 KAUST Solar Center (KSC), Physical Sciences and Engineering Division (PSE), King Abdullah ... organic and inorganic components demands a high level of control over the deposition rates of each ...
- Egypt project aims to conserve water with solar panelson February 28, 2020 at 5:18 am
Researchers at Egypt's Nile University have designed a prototype canal that lowers levels of evaporation to conserve water, which can then be used to boost agriculture or produce energy.
- Solar Evaporation to Remain Largest and Fastest Growing Salt Production Method Through 2023on February 25, 2020 at 1:48 am
Solar evaporation is expected to remain the largest and fastest growing method of salt extraction, supported by its: low cost relative to the more energy-intensive rock salt mining and brine ...
via Bing News