A self-cleaning device made of wood aims to make small-scale desalination more practical
About a billion people around the world lack access to safe drinking water. Desalinating salty water into drinkable water can help to fill this dangerous gap. But traditional desalination systems are far too expensive to install and operate in many locations, especially in low-income countries and remote areas.
Now researchers at the University of Maryland’s A. James Clark School of Engineering have demonstrated a successful prototype of one critical component for affordable small-scale desalination: an inexpensive solar evaporator, made of wood. The evaporator generates steam with high efficiency and minimal need for maintenance, says Liangbing Hu, associate professor of materials science and engineering and affiliate of the Maryland Energy Innovation Institute.
The design employs a technique known as interfacial evaporation, “which shows great potential in response to global water scarcity because of its high solar-to-vapor efficiency, low environmental impact, and portable device design with low cost,” Hu says. “These features make it suitable for off-grid water generation and purification, especially for low-income countries.”
Interfacial evaporators are made of thin materials that float on saline water. Absorbing solar heat on top, the evaporators continuously pull up the saline water from below and convert it to steam on their top surface, leaving behind the salt, explains Hu, who is senior author on a paper describing the work in Advanced Materials.
However, over time salt can build up on this evaporative surface, gradually degrading performance until it is removed, he says.
Hu and his colleagues minimized the need for this maintenance with a device made out of basswood that exploits the wood’s natural structure of the micron-wide channels that carry water and nutrients up the tree.
The researchers supplement these natural channels by drilling a second array of millimeter-wide channels through a thin cross-section of the wood, says Yudi Kuang, a visiting scholar and lead author on the paper. The investigators then briefly expose the top surface to high heat, which carbonizes the surface for greater solar absorption.
In operation, as the device absorbs solar energy, it draws up salty water through the wood’s natural micron-wide channels. Salt is spontaneously exchanged from these tiny channels through natural openings along their sides to the vastly wider drilled channels, and then easily dissolves back into the water below.
“In the lab, we have successfully demonstrated excellent anti-fouling in a wide range of salt concentrations, with stable steam generation with about 75% efficiency,” says Kuang.
“Using natural wood as the only starting material, the salt-rejecting solar evaporator is expected to be low-cost,” adds research associate Chaoji Chen. The evaporator approach also is effective in other types of wood with similar natural channels. The researchers now are optimizing their system for higher efficiency, lower capital cost, and integration with a steam condenser to complete the desalination cycle.
Hu’s lab also recently developed another solar-heated prototype device that takes advantage of carbonized wood’s ability to absorb and distribute solar energy–this one created to help clean up spills of hard-to-collect heavy oils. “Our carbonized wood material demonstrates rapid and efficient crude oil absorption, as well as low cost and scalable manufacturing potential,” says Kuang, lead author on a paper about the research in Advanced Functional Materials.
“Wood is an intriguing material scaffold, with its unique hierarchically porous structure, and it is a renewable, abundant and cost-effective resource,” Hu says. “In our lab, the fundamental understanding of biomaterials (especially wood) leads us to achieve extraordinary performance that is competitive with widely used but non-sustainable materials.”
Among other projects, his lab has created light and effective “nanowood” insulating materials. It also has engineered “super wood” that is 12 times stronger and 10 times tougher than natural wood, and potentially may replace steel, titanium or carbon fiber in certain applications, he says.
The Latest on: Solar evaporator
via Google News
The Latest on: Solar evaporator
- Atmospheric Warming, Loss of Snow Cover, and Declining Colorado River Flowon March 30, 2020 at 10:15 am
Evaporation requires energy, which ultimately comes from the sun. But only a fraction of the solar radiation that reaches the basin is absorbed by the ground; the remaining fraction is reflected back ...
- Converting Pomelo Peel into Eco-friendly and Low-Consumption Photothermic Biomass Sponge toward Multifunctioal Solar-to-Heat Conversionon March 30, 2020 at 4:40 am
The photothermic sponge which is derived from this process, can then be effectively employed to realize solar enhanced water evaporation and heavy crude oil removal. The polypyrrole-functionalized ...
- Best Solar Pool Coverson March 25, 2020 at 7:46 pm
It will also decrease water evaporation which will save you money in water and pool chemicals. This product is also very reasonably priced and comes with a 3-year warranty, so you can’t go wrong with ...
- Solar Device Generates Cooling Load Without Electricityon March 24, 2020 at 9:03 am
Cooling by water evaporation has always been known. As an example ... the difference in salinity between the two solutions can be continuously—and sustainably—restored using solar energy, as also ...
- Vacuum Coating Equipment Market Value to Cross USD 38 Billion-Mark by 2026: Global Market Insights, Inc.on March 24, 2020 at 2:00 am
SELBYVILLE, Del., March 24, 2020 /PRNewswire/ -- According to the latest report 'Vacuum Coating Equipment Market by Technology (Physical Vapour De ...
- A new low-cost solar technology for environmental coolingon March 23, 2020 at 12:19 pm
with this effect being further amplified thanks to the presence of different evaporation stages. Clearly, the salty water concentration will constantly decrease and the cooling effect will diminish ...
- Anti Reflective (AR) Coatings Market Technological Trends in 2020-2029 | Royal DSM, Honeywell International Inc, Carl Zeisson March 23, 2020 at 2:06 am
Global News For Anti Reflective (AR) Coatings Market Study 2020-2029, by Segment (Electron Beam Evaporation, Sputtering, Others), Playing a Pivotal Role in Expanding by (Eyewear, Electronics, Solar, ...
- Oil giants team up to float coastal solar visionon March 20, 2020 at 3:55 am
A number of floating solar projects have been developed around the world ... the panels tend to work more effectively when kept cool by the water and they can serve to limit evaporation from ...
- Community Team Candidate Bernard Gillic wants an Isa solar legacyon March 15, 2020 at 7:00 pm
"There are so many solar choices out there at the moment and we would investigate all options, including putting solar on the shallower areas of Lake Moodarra, this could slow down evaporation of the ...
- Materials for solar-powered water evaporationon March 10, 2020 at 5:14 am
Solar-powered water evaporation — the extraction of vapour from liquid water using solar energy — provides the basis for the development of eco-friendly and cost-effective freshwater production.
via Bing News