A self-cleaning device made of wood aims to make small-scale desalination more practical
About a billion people around the world lack access to safe drinking water. Desalinating salty water into drinkable water can help to fill this dangerous gap. But traditional desalination systems are far too expensive to install and operate in many locations, especially in low-income countries and remote areas.
Now researchers at the University of Maryland’s A. James Clark School of Engineering have demonstrated a successful prototype of one critical component for affordable small-scale desalination: an inexpensive solar evaporator, made of wood. The evaporator generates steam with high efficiency and minimal need for maintenance, says Liangbing Hu, associate professor of materials science and engineering and affiliate of the Maryland Energy Innovation Institute.
The design employs a technique known as interfacial evaporation, “which shows great potential in response to global water scarcity because of its high solar-to-vapor efficiency, low environmental impact, and portable device design with low cost,” Hu says. “These features make it suitable for off-grid water generation and purification, especially for low-income countries.”
Interfacial evaporators are made of thin materials that float on saline water. Absorbing solar heat on top, the evaporators continuously pull up the saline water from below and convert it to steam on their top surface, leaving behind the salt, explains Hu, who is senior author on a paper describing the work in Advanced Materials.
However, over time salt can build up on this evaporative surface, gradually degrading performance until it is removed, he says.
Hu and his colleagues minimized the need for this maintenance with a device made out of basswood that exploits the wood’s natural structure of the micron-wide channels that carry water and nutrients up the tree.
The researchers supplement these natural channels by drilling a second array of millimeter-wide channels through a thin cross-section of the wood, says Yudi Kuang, a visiting scholar and lead author on the paper. The investigators then briefly expose the top surface to high heat, which carbonizes the surface for greater solar absorption.
In operation, as the device absorbs solar energy, it draws up salty water through the wood’s natural micron-wide channels. Salt is spontaneously exchanged from these tiny channels through natural openings along their sides to the vastly wider drilled channels, and then easily dissolves back into the water below.
“In the lab, we have successfully demonstrated excellent anti-fouling in a wide range of salt concentrations, with stable steam generation with about 75% efficiency,” says Kuang.
“Using natural wood as the only starting material, the salt-rejecting solar evaporator is expected to be low-cost,” adds research associate Chaoji Chen. The evaporator approach also is effective in other types of wood with similar natural channels. The researchers now are optimizing their system for higher efficiency, lower capital cost, and integration with a steam condenser to complete the desalination cycle.
Hu’s lab also recently developed another solar-heated prototype device that takes advantage of carbonized wood’s ability to absorb and distribute solar energy–this one created to help clean up spills of hard-to-collect heavy oils. “Our carbonized wood material demonstrates rapid and efficient crude oil absorption, as well as low cost and scalable manufacturing potential,” says Kuang, lead author on a paper about the research in Advanced Functional Materials.
“Wood is an intriguing material scaffold, with its unique hierarchically porous structure, and it is a renewable, abundant and cost-effective resource,” Hu says. “In our lab, the fundamental understanding of biomaterials (especially wood) leads us to achieve extraordinary performance that is competitive with widely used but non-sustainable materials.”
Among other projects, his lab has created light and effective “nanowood” insulating materials. It also has engineered “super wood” that is 12 times stronger and 10 times tougher than natural wood, and potentially may replace steel, titanium or carbon fiber in certain applications, he says.
The Latest on: Solar evaporator
via Google News
The Latest on: Solar evaporator
- Vapour Deposition Market To Witness Astonishing Growth Tokyo Electron Limited., IHI Corporation, Kurt J. Lesker Company , Veeco Instruments Incon April 10, 2020 at 4:19 am
In coating process various products such as microelectronics, cutting tools, storage devices, medical equipment, solar products, etc. are coated with materials to form a thin protective film. There ...
- New process for kesterite solar cells with 10% efficiencyon April 7, 2020 at 11:23 pm
“As a consequence of the Cu‐rich starting composition and bonding of Sn in the alloy structure, the formation and subsequent evaporation of SnSe 2−x phases in the reaction ... which could be a novel ...
- Atmospheric Warming, Loss of Snow Cover, and Declining Colorado River Flowon March 30, 2020 at 10:15 am
Evaporation requires energy, which ultimately comes from the sun. But only a fraction of the solar radiation that reaches the basin is absorbed by the ground; the remaining fraction is reflected back ...
- Converting Pomelo Peel into Eco-friendly and Low-Consumption Photothermic Biomass Sponge toward Multifunctioal Solar-to-Heat Conversionon March 30, 2020 at 4:40 am
The photothermic sponge which is derived from this process, can then be effectively employed to realize solar enhanced water evaporation and heavy crude oil removal. The polypyrrole-functionalized ...
- Vacuum Coating Equipment Market Value to Cross USD 38 Billion-Mark by 2026: Global Market Insights, Inc.on March 24, 2020 at 2:00 am
According to the latest report "Vacuum Coating Equipment Market by Technology (Physical Vapour Deposition [Evaporation, Magnetron Sputtering], Chemical Vapour Deposition), Application (PVD ...
- Materials for solar-powered water evaporationon March 10, 2020 at 5:14 am
Solar-powered water evaporation — the extraction of vapour from liquid water using solar energy — provides the basis for the development of eco-friendly and cost-effective freshwater production.
- Super lightweight foam uses sunlight to harvest water from evaporationon March 9, 2020 at 10:41 pm
(Reprinted with permission by American Chemical Society) (click on image to enlarge) "We chose solar-induced evaporation as a strategy to address the water scarcity issue because the Sun has so much ...
- Egypt project aims to conserve water with solar panelson February 28, 2020 at 5:18 am
Researchers at Egypt's Nile University have designed a prototype canal that lowers levels of evaporation to conserve water, which can then be used to boost agriculture or produce energy.
- Solar Evaporation to Remain Largest and Fastest Growing Salt Production Method Through 2023on February 25, 2020 at 1:48 am
Solar evaporation is expected to remain the largest and fastest growing method of salt extraction, supported by its: low cost relative to the more energy-intensive rock salt mining and brine ...
- Colorado River flow dwindles as warming-driven loss of reflective snow energizes evaporationon February 20, 2020 at 1:41 pm
Milly and Dunne used a hydrologic model and historical observations to show that this decrease is due mainly to increased evapotranspiration caused by a reduction of albedo from snow loss and the ...
via Bing News