When German mineralogist Gustav Rose stood on the slopes of Russia’s Ural Mountains in 1839 and picked up a piece of a previously undiscovered mineral, he had never heard of transistors or diodes or had any concept of how conventional electronics would become an integral part of our daily lives. He couldn’t have anticipated that the rock he held in his hand, which he named “perovskite,” could be a key to revolutionizing electronics as we know them.
In 2017, University of Utah physicist Valy Vardeny called perovskite a “miracle material” for an emerging field of next-generation electronics, called spintronics, and he’s standing by that assertion. In a paper published today in Nature Communications, Vardeny, along with Jingying Wang, Dali Sun (now at North Carolina State University) and colleagues present two devices built using perovskite to demonstrate the material’s potential in spintronic systems. Its properties, Vardeny says, bring the dream of a spintronic transistor one step closer to reality.
The full study can be found here.
A conventional digital electronic system conveys a binary signal (think 1s and 0s) through pulses of electrons carried through a conductive wire. Spintronics can convey additional information via another characteristic of electrons, their spin direction (think up or down). Spin is related to magnetism. So spintronics uses magnetism to align electrons of a certain spin, or “inject” spin into a system.
If you’ve ever done the old science experiment of turning a nail into a magnet by repeatedly dragging a magnet along its length, then you’ve already dabbled in spintronics. The magnet transfers information to the nail. The trick is then transporting and manipulating that information, which requires devices and materials with finely tuned properties. Researchers are working toward the milestone of a spin transistor, a spintronics version of the electronic components found in practically all modern electronics. Such a device requires a semiconductor material in which a magnetic field can easily manipulate the direction of electrons’ spin—a property called spin-orbit coupling. It’s not easy to build such a transistor, Wang says. “We keep searching for new materials to see if they’re more suitable for this purpose.”
Here’s where perovskites come into play.
Perovskites are a class of mineral with a particular atomic structure. Their value as a technological material has only became apparent in the past 10 years. Because of that atomic structure, researchers have been developing perovskite into a material for making solar panels. By 2018 they’d achieved an efficiency of up to 23 percent of solar energy converted to electrical energy—a big step up from 3.8 percent in 2009.
In the meantime, Vardeny and his colleagues were exploring the possibilities of spintronics and the various materials that could prove effective in transmitting spin. Because of heavy lead atoms in perovskite, physicists predicted that the mineral may possess strong spin-orbit coupling. In a 2017 paper, Vardeny and physics assistant professor Sarah Li showed that a class of perovskites called organic-inorganic hybrid perovskites do indeed possess large spin-orbit coupling. Also, the lifetime of spin injected into the hybrid materials lasted a relatively long time. Both results suggested that this kind of hybrid perovskite held promise as a spintronics material.
Two spintronic devices
The next step, which Vardeny and Wang accomplished in their recent work, was to incorporate hybrid perovskite into spintronic devices. The first device is a spintronic light-emitting diode, or LED. The semiconductor in a traditional LED contains electrons and holes—places in atoms where electrons should be, but aren’t. When electrons flow through the diode, they fill the holes and emit light.
Wang says that a spintronic LED works much the same way, but with a magnetic electrode, and with electron holes polarized to accommodate electrons of a certain spin. The LED lit up with circularly polarized electroluminescence, Wang says, showing that the magnetic electrode successfully transferred spin-polarized electrons into the material.
“It’s not self-evident that if you put a semiconductor and a ferromagnet together you get a spin injection,” Vardeny adds. “You have to prove it. And they proved it.”
The second device is a spin valve. Similar devices already exist and are used in devices such as computer hard drives. In a spin valve, an external magnetic field flips the polarity of magnetic materials in the valve between an open, low-resistance state and a closed, high-resistance state.
Wang and Vardeny’s spin valve does more. With hybrid perovskite as the device material, the researchers can inject spin into the device and then cause the spin to precess, or wobble, within the device using magnetic manipulation.
That’s a big deal, the researchers say. “You can develop spintronics that are not only useful for recording information and data storage, but also calculation,” Wang says. “That was an initial goal for the people who started the field of spintronics, and that’s what we are still working on.”
Taken together, these experiments show that perovskite works as a spintronic semiconductor. The ultimate goal of a spin-based transistor is still several steps away, but this study lays important groundwork for the path ahead.
“What we’ve done is to prove that what people thought was possible with perovskite actually happens,” Vardeny says. “That’s a big step.”
Learn more: SPINTRONICS “MIRACLE MATERIAL” PUT TO THE TEST
The Latest on: Spintronic devices
via Google News
The Latest on: Spintronic devices
- Magnetic wave-driven computing with no heat in the offingon November 30, 2019 at 6:30 am
The discovery ignites hope towards practical magnetic-based devices, which have the potential to compute far more efficiently than electronics. The new circuit design offers a path to "spintronic ...
- Researchers find potential solution to overheating mobile phoneson November 29, 2019 at 7:56 am
We believe it can be substantially enhanced by engineering devices further, so that the magnon torque will become more energy efficient," Prof Yang said. "We know that the electrical spin torque has ...
- 'Magnetic domain wall' circuit design could enable magnetic wave-based computing - little or no electricity requiredon November 29, 2019 at 4:03 am
For the past several years, researchers have been working on magnetic-based "spintronic" devices, which are said to require relatively little power to run. In addition, they generate nearly zero heat ...
- NUS researchers find potential solution to overheating mobile phoneson November 28, 2019 at 11:09 pm
We believe it can be substantially enhanced by engineering devices further, so that the magnon torque will become more energy efficient,” Prof Yang said. “We know that the electrical spin torque has ...
- MIT Magnetic Wave Circuit Step Toward Highly Efficient Spintronic Computerson November 28, 2019 at 3:51 pm
Circuit design offers a path to “spintronic” devices that use little electricity and generate practically no heat. MIT researchers have devised a novel circuit design that enables precise control of ...
- Toward more efficient computing, with magnetic waveson November 28, 2019 at 11:04 am
In search of more efficient alternatives, researchers have started designing magnetic-based "spintronic" devices, which use relatively little electricity and generate practically no heat. Spintronic ...
- New way to identify, manipulate topological metals for spintronicson November 27, 2019 at 2:14 pm
A recent study gives researchers an easier way of finding Weyl semimetals and manipulating them for potential spintronic devices. Topological materials have become a hot topic in quantum materials ...
- Viewpoint: The Heat in Antiferromagnetic Switchingon November 27, 2019 at 8:00 am
Thermal gradients of this sort frequently arise in spintronic devices and offer challenges and opportunities in their use . Chiang et al.’s work could explain a puzzling aspect of the switching ...
- Orbitally dominated Rashba-Edelstein effect in noncentrosymmetric antiferromagnetson November 26, 2019 at 2:09 am
Efficient manipulation of magnetic order with electric current pulses is desirable for achieving fast spintronic devices. The Rashba-Edelstein effect, wherein spin polarization is electrically induced ...
- Observation of exceptional points in magnonic parity-time symmetry deviceson November 22, 2019 at 11:10 am
Second, the nonequivalent magnon current can be efficiently excited and translated into electric current, which benefits the magnon-spintronic device applications. Last, we notice that the ƤƮ ...
via Bing News