Scientists from Nanyang Technological University, Singapore (NTU Singapore) have developed a technology where two robots can work in unison to 3D-print a concrete structure.
This method of concurrent 3D-printing, known as swarm printing, paves the way for a team of mobile robots to print even bigger structures in future.
Developed by Assistant Professor Pham Quang Cuong and his team at NTU’s Singapore Centre for 3D Printing, this new multi-robot technology was published in Automation in Construction, a top tier journal for civil engineering. The NTU scientist was also behind the Ikea Bot earlier this year where two robots assembled an Ikea chair in 8 min 55s.
Using a specially formulated cement mix suitable for 3-D printing, this new development will allow for unique concrete designs currently not possible with conventional casting. Structures can also be produced on demand and in a much shorter period.
Currently, 3D-printing of large concrete structures requires huge printers that are larger than the printed objects, which is unfeasible since most construction sites have space constraints.
Having multiple mobile robots that can 3D print in sync means large structures like architectural features and specially-designed facades can be printed anywhere as long as there is enough space for the robots to move around the work site.
The NTU robots 3D-printed a concrete structure measuring 1.86m x 0.46m x 0.13m in eight minutes. It took two days to harden and one week for it to achieve its full strength before it was ready for installation.
“We envisioned a team of robots which can be transported to a work site, print large pieces of concrete structures and then move on to the next project once the parts have been printed,” explained Asst Prof Pham from NTU’s School of Mechanical and Aerospace Engineering.
“This research builds on the knowledge we have acquired from developing a robot to autonomously assemble an Ikea chair. But this latest project is more complex in terms of planning, execution, and on a much larger scale.”
Printing concrete structures concurrently with two mobile robots was a huge challenge, as both robots have to move into place and start printing their parts without colliding into each other.
Printing the concrete structure in segments is also not acceptable, as joints between the two parts will not bond properly if the concrete does not overlap during the printing process.
This multi-step process starts by having the computer map out the design to be printed and assign a specific part of the printing to a robot. It then uses a special algorithm to ensure that each of robot arm will not collide with another during the concurrent printing.
Using precise location positioning, the robots then move into place and print the parts in good alignment, ensuring that the joints between the separate parts are overlapped. Finally, the mixing and pumping of the specialised liquid concrete mix have to be blended evenly and synchronised to ensure consistency.
Professor Chua Chee Kai, Executive Director of the Singapore Centre for 3D Printing said disruptive Industry 4.0 technologies like additive manufacturing, can be advanced even further when combined with other innovative technologies like robotics, AI, materials science and green manufacturing techniques.
“This multiple robot printing project is highly interdisciplinary, requiring roboticists to work with materials scientists to make printable concrete. To achieve the end result of a strong concrete structure, we had to combine their expertise with mechanical engineers and civil engineering experts.”
“Such an innovation demonstrates to the industry what is feasible now, and prove what is possible in the future if we are creative in developing new technologies to augment conventional building and construction methods.”
This research project was supported by the National Research Foundation, Singapore (NRF Singapore) and Sembcorp Design and Construction, one of the key industry research partners of SC3DP.
Moving forward, the NTU research team will look at integrating even more robots to print larger scale structures, optimising printing algorithm for consistent performance and to improve the concrete material for faster curing.
The Latest on: Swarm printing
via Google News
The Latest on: Swarm printing
- Drone swarms in 3 states prompt FAA, FBI investigation of mysteryon January 9, 2020 at 6:31 pm
Sheriff's departments across Colorado, Kansas and Nebraska have been flooded with reports of mysterious nighttime sightings.
- Swarms of locusts damage wheat, cumin, potatoes crops in Gujaraton January 8, 2020 at 5:25 am
Mumbai: The biggest locust swarm to hit India’s Gujarat in more than a quarter of a century has resulted in mass damage to key crops in the western state. More than 25,000 hectares (61,776 acres) of ...
- Sex Toys Debut with 3D Printing at CES 2020on January 7, 2020 at 6:06 am
After a ban was lifted this year, a swarm of devices designed for sexual health and wellness are descending ... The lifting of the ban will also be impacting the 3D printing firms exhibiting at CES, ...
- Drone Swarm At Night Baffles US City, Task Force To Probe Sightingson January 6, 2020 at 8:11 pm
The night-time drone flights over parts of rural Colorado and Nebraska that have baffled investigators will now be the subject of a multi-agency task force, federal and state authorities announced on ...
- Kirk Cousins wins a big one, crushing Saints with another overtime ousteron January 5, 2020 at 5:15 pm
NEW ORLEANS — After tight end Kyle Rudolph emerged from a purple swarm of celebrating Vikings near the corner of the end zone, he took an opportunity to mock those who doubted quarterback Kirk Cousins ...
- Locust army from Pakistan ravages oilseed, cumin and wheat crops in Gujarat, Rajasthanon January 4, 2020 at 7:26 am
New Delhi: The swarms of locusts from Pakistan that have invaded farms in parts of Gujarat and Rajasthan since December has resulted in an estimated loss of Rs 5 crore so far, ThePrint has learnt.
- Locust Swarm In Gujarat, Worst In 25 Years, Leaves Acres Of Crops Damagedon December 27, 2019 at 1:18 am
While officials have attempted to tackle the swarm with pesticides, farmers have deployed drums to drive away the insects, with videos showing schoolgirls banging on steel plates -- due to local ...
- Counterstriking aerial mean-machines: How neutralising swarm drone attacks will decide future warson December 19, 2019 at 12:37 am
On 14 September 2019, several drones were used to swarm attack two Saudi Aramco oil processing facilities at Abqaiq and Khurais in eastern Saudi Arabia. The attack caused large fires at the processing ...
- Innovations in E-fabric Printing, Die Casting, 3D Printing, and Robots, 2019 Research Report - ResearchAndMarkets.comon December 18, 2019 at 5:46 am
DUBLIN--(BUSINESS WIRE)--The "Innovations in E-fabric Printing, Die Casting ... fiber-based composite manufacturing), smart robotics (agile robots, consumer robots, swarm robotics, cobots), monitoring ...
via Bing News