Scientists from Tartu have developed a material which could make it possible to print energy-efficient houses out of milled peat and oil shale ash quickly and cheaply using a 3D printer.
Scientists from the University of Tartu and the Estonian University of Life Sciences have created a construction material consisting primarily of peat and oil shale ash which may reduce the construction costs of a private house nearly tenfold.
The aim was to create such a self-supporting construction material based on local natural resources and waste that could be used to 3D print houses that are up to two-storeys high directly on the construction site.
Better use of resources
Wetlands cover about 22% of Estonia’s area, but the peat growing there is used in extremely small amounts. So far, only the drier top part of the peat layer has been deemed usable. The unused part is left to decay.
This peat could also be used in an economically beneficial way. Many fractions can be separated from peat, for example humic substances and waxes, and the final residue can even be used for producing cellulose.
The most popular method for mining peat is milling. During milling, 10-20-mm layers are cut loose from the peat deposit and left to dry. For this method to pay off, most milling fields are larger than 100 hectares.
Raising the value of waste
“So far, no one has produced peat composite as a construction material because peat prevents many materials from hardening. In our project, we managed to overcome this issue,” said Liiv excitedly.
Instead of the usual cement, scientists from Tartu use oil shale ash as the binder in their mix. In Estonia, it is estimated that about 7 million tonnes of oil shale ash are created in a year, only 5% of which is reused. The rest is deposited in ash hills and this creates considerable environmental pollution.
Oil shale ash is classified as a hazardous waste because it becomes very basic when in contact with water (pH almost 13). However, ash with such a pH is the best fit for construction materials. The developed material is completely harmless and safe for the environment.
Furthermore, during testing, scientists found a solution for reducing the setting time from about 30 days to one day. If the pH of a pore solution is below 9, it won’t harden at all. This issue is solved by a very high pH by binding the potassium oxide and alkali metals found in oil shale ash to insoluble compounds.
Inside the peat, oil shale ash reacts with humic acids and absorbs carbon dioxide. Due to chemical reactions, the binder becomes regular concrete and limestone.
According to Toomas Tenno, a professor at the University of Tartu’s chair of colloidal and environmental chemistry, nanosized additives, e.g. nanosilica or silicon smoke, are added to peat and oil shale ash to improve their properties.
“As the particles are very small, they dissolve well and distribute throughout the material evenly. Silicon smoke improves the quality of this material significantly,” said Tenno.
It took about a year before the right mixture was found for the material that is strong and has very good thermal conductivity. After final hardening, the material is strong and very light, has low heat transfer and is durable. Even though peat is also used as fuel, the material developed by scientists is incombustible.
The peat material achieves its initial hardness in 24 hours but remains elastic for a considerably longer time. Thus, there is no need for insulation or fillers and the entire structure becomes airtight without adding any wind protection. Furthermore, it is a good noise blocker.
As peat and oil shale ash are not very expensive, house builders would be especially happy about the price of the material. According to Liiv, scientists calculated that the cost for the construction of a house shell printed from this material with a floor surface of 100-150 square meters could be about €5,000 (compared to the construction of the shell of a framed building of equivalent size, which would cost about ten times more).
By now, the research as well as many tests have been completed. Issues with materials technology have been resolved successfully. Peat material is ready for manufacture as elements, but a lot of work still needs to be done for 3D printing.
The Latest on: 3D printed house
via Google News
The Latest on: 3D printed house
- North Dakota Supreme Court rules against Gov. Doug Burgum in fight to fill dead candidate's state House seaton November 24, 2020 at 7:15 pm
The North Dakota Supreme Court on Tuesday ruled that Gov. Doug Burgumdoes not have authority to fill a state House seat won by a man who died before Election Day. These Power-Free 3D-Printed Objects ...
- Trump twice touts Dow’s 30,000 milestone in brief White House appearanceson November 24, 2020 at 12:47 pm
President Donald Trump on Tuesday twice touts the Dow Jones Industrial Average's 30,000-point milestone, celebrating the stock index's record but making no mention of conceding the election to Joe ...
- A Look How This Texas Startup Is Helping The Air Force Use 3D Printing To Replace Partson November 23, 2020 at 1:41 pm
Here's how this Texas-based startup with help the US Air Force 3D print replacement parts. The Room Where It Happened : A White House Memoir Hardcover – 23 Jun. 2020 by John Bolton (Author).
- Carestream Dental's CS Model+ update supports in-house alignerson November 22, 2020 at 11:14 am
Carestream Dental has unveiled the latest version of its CS Model+ CAD/CAM offering, which is aimed at helping dental practices design clear aligners in-house.
- Park bench printed in Hamilton heralds possibility of 3D printed houseson November 19, 2020 at 8:34 pm
Robots printing concrete houses is being pitched as an alternative to traditional house building and a way to help ease the housing crisis.
- A new material allows this company to 3D print most of a house in a single dayon November 19, 2020 at 4:39 pm
Even when Extreme Home Makeover was still on the air, building most of a house in a single day wasn’t feasible. California-based Mighty Buildings, however, has developed a proprietary 3D-printing ...
- Orthodontists R&D Tax Credit CBCT Imaging 3D Printing Aligner Guide Launchedon November 18, 2020 at 8:16 pm
Provo, Utah-based Dr. Tax Credit, LLC has just announced the release of its new R&D tax credit guide for orthodontists to assist them with reducing their tax bill. Provo, Utah-based Dr. Tax Credit, ...
- Cobra Golf, HP Unveil 3D-Printed Putter, And Bryson DeChambeau Had A Hand In Its Developmenton November 17, 2020 at 9:00 am
After almost two years of design, prototyping and testing, Cobra Golf has produced the first 3D printed golf club ever sold commercially by a major ...
- 3D Printer Market will Accelerate at a CAGR of over 39% during 2020-2024 | Size, Share, Trends, Analysis, and Forecast | Research Report by Technavioon November 17, 2020 at 7:30 am
Technavio has been monitoring the 3d printer market and it is poised to grow by USD 14.49 billion during 2020-2024, progressing at a CAGR of over 39% during the forecast period. The report offers an ...
via Bing News