Technology captures water evaporating from cooling towers; prototype to be installed on MIT’s Central Utility Plant.
A new system devised by MIT engineers could provide a low-cost source of drinking water for parched cities around the world while also cutting power plant operating costs.
About 39 percent of all the fresh water withdrawn from rivers, lakes, and reservoirs in the U.S. is earmarked for the cooling needs of electric power plants that use fossil fuels or nuclear power, and much of that water ends up floating away in clouds of vapor. But the new MIT system could potentially save a substantial fraction of that lost water — and could even become a significant source of clean, safe drinking water for coastal cities where seawater is used to cool local power plants.
The principle behind the new concept is deceptively simple: When air that’s rich in fog is zapped with a beam of electrically charged particles, known as ions, water droplets become electrically charged and thus can be drawn toward a mesh of wires, similar to a window screen, placed in their path. The droplets then collect on that mesh, drain down into a collecting pan, and can be reused in the power plant or sent to a city’s water supply system.
The system, which is the basis for a startup company called Infinite Cooling that last month won MIT’s $100K Entrepreneurship Competition, is described in a paper published today in the journal Science Advances, co-authored by Maher Damak PhD ’18 and associate professor of mechanical engineering Kripa Varanasi. Damak and Varanasi are among the co-founders of the startup.
The reason for the inefficiency of existing systems became apparent in the team’s detailed lab experiments: The problem is in the aerodynamics of the system. As a stream of air passes an obstacle, such as the wires in these mesh fog-catching screens, the airflow naturally deviates around the obstacle, much as air flowing around an airplane wing separates into streams that pass above and below the wing structure. These deviating airstreams carry droplets that were heading toward the wire off to the side, unless they were headed bang-on toward the wire’s center.
The result is that the fraction of droplets captured is far lower than the fraction of the collection area occupied by the wires, because droplets are being swept aside from wires that lie in front of them. Just making the wires bigger or the spaces in the mesh smaller tends to be counterproductive because it hampers the overall airflow, resulting in a net decrease in collection.
But when the incoming fog gets zapped first with an ion beam, the opposite effect happens. Not only do all of the droplets that are in the path of the wires land on them, even droplets that were aiming for the holes in the mesh get pulled toward the wires. This system can thus capture a much larger fraction of the droplets passing through. As such, it could dramatically improve the efficiency of fog-catching systems, and at a surprisingly low cost. The equipment is simple, and the amount of power required is minimal.
Next, the team focused on capturing water from the plumes of power plant cooling towers. There, the stream of water vapor is much more concentrated than any naturally occurring fog, and that makes the system even more efficient. And since capturing evaporated water is in itself a distillation process, the water captured is pure, even if the cooling water is salty or contaminated. At this point, Karim Khalil, another graduate student from Varanasi’s lab joined the team.
“It’s distilled water, which is of higher quality, that’s now just wasted,” says Varanasi. “That’s what we’re trying to capture.” The water could be piped to a city’s drinking water system, or used in processes that require pure water, such as in a power plant’s boilers, as opposed to being used in its cooling system where water quality doesn’t matter much.
A typical 600-megawatt power plant, Varanasi says, could capture 150 million gallons of water a year, representing a value of millions of dollars. This represents about 20 to 30 percent of the water lost from cooling towers. With further refinements, the system may be able to capture even more of the output, he says.
What’s more, since power plants are already in place along many arid coastlines, and many of them are cooled with seawater, this provides a very simple way to provide water desalination services at a tiny fraction of the cost of building a standalone desalination plant. Damak and Varanasi estimate that the installation cost of such a conversion would be about one-third that of a building a new desalination plant, and its operating costs would be about 1/50. The payback time for installing such a system would be about two years, Varanasi says, and it would have essentially no environmental footprint, adding nothing to that of the original plant.
“This can be a great solution to address the global water crisis,” Varanasi says. “It could offset the need for about 70 percent of new desalination plant installations in the next decade.”
In a series of dramatic proof-of-concept experiments, Damak, Khalil, and Varanasi demonstrated the concept by building a small lab version of a stack emitting a plume of water droplets, similar to those seen on actual power plant cooling towers, and placed their ion beam and mesh screen on it. In video of the experiment, a thick plume of fog droplets is seen rising from the device — and almost instantly disappears as soon as the system is switched on.
The team is currently building a full-scale test version of their system to be placed on the cooling tower of MIT’s Central Utility Plant, a natural-gas cogeneration power plant that provides most of the campus’ electricity, heating, and cooling. The setup is expected to be in place by the end of the summer and will undergo testing in the fall. The tests will include trying different variations of the mesh and its supporting structure, Damak says.
That should provide the needed evidence to enable power plant operators, who tend to be conservative in their technology choices, to adopt the system. Because power plants have decades-long operating lifetimes, their operators tend to “be very risk-averse” and want to know “has this been done somewhere else?” Varanasi says. The campus power plant tests will not only “de-risk” the technology, but will also help the MIT campus improve its water footprint, he says. “This can have a high impact on water use on campus.”
The Latest on: Water recovery system
via Google News
The Latest on: Water recovery system
- Santa Cruz City Council adopts strategy to increase water supplyon November 13, 2019 at 4:55 pm
One of these efforts is developing aquifer storage and recovery, or a way to store water in nearby aquifers to use when there is a drought. The water department is focusing its efforts on the Beltz ...
- Subsea Systems Market Size, Market Growth , Leading Players and Forecast to 2022on November 12, 2019 at 4:52 am
and deep water extracting systems (i.e floating drilling vessels ... technological development is helping to reduce the extraction cost and to enhance the oil recovery process. Favourable regulatory ...
- Editorial: Dead dogs and toxic fish: Welcome to Stockton, a city choking on California water policyon November 12, 2019 at 3:08 am
Stockton is a city simultaneously in recovery and under stress. The municipality of about 300,000 ... its long trip down the western slope of the Sierra and a sharp turn north through the San Joaquin ...
- Viscous water holds the secret to an ice skater’s smooth glideon November 11, 2019 at 10:52 am
Surprisingly, the authors found that this melt water is up to 100 times more viscous than normal water, making it an excellent lubricant. A low-fibre diet could hamper the recovery of a healthy gut ...
- Waste Heat Recovery System Market Analysis, Growth Rate, Overview, Market Segmentation and Forecast by 2024on November 11, 2019 at 9:21 am
or even waste water from cooling processes such as in steel cooling. This report projects the trends and opportunities of the global Waste Heat Recovery System market. This research study includes a ...
- Two local men heading to The Bahamas to help with recovery efforton November 8, 2019 at 2:16 pm
Todd Saums and Tom McGrain will help with troubleshooting and repairing water and wastewater systems. They leave this Sunday and will return November 18th. The trip is part of a non-profit called ...
- After storm, Dominion Energy workers help recovery at VB veterans retreaton November 8, 2019 at 12:12 pm
The retreat sits on a peaceful farm near the water, but Friday morning was a lot louder than usual as chainsaws geared ... The workers also provided free energy upgrades and a new smart home system at ...
- FOG removal from water in power generation facilitieson November 8, 2019 at 10:08 am
In order to prevent any oily water from escaping into the environment, power plants are focused on recovery of the waste oil before the water is reused, treated, filtered or discharged into a waterway ...
- Koch Membrane Systems acquires Eco-Tec Inc.on November 8, 2019 at 6:06 am
Koch Membrane Systems, a developer and manufacturer of membrane filtration ... other process technology solutions for a wide range of industries, including chemical recovery and purification, ...
via Bing News