Technology captures water evaporating from cooling towers; prototype to be installed on MIT’s Central Utility Plant.
A new system devised by MIT engineers could provide a low-cost source of drinking water for parched cities around the world while also cutting power plant operating costs.
About 39 percent of all the fresh water withdrawn from rivers, lakes, and reservoirs in the U.S. is earmarked for the cooling needs of electric power plants that use fossil fuels or nuclear power, and much of that water ends up floating away in clouds of vapor. But the new MIT system could potentially save a substantial fraction of that lost water — and could even become a significant source of clean, safe drinking water for coastal cities where seawater is used to cool local power plants.
The principle behind the new concept is deceptively simple: When air that’s rich in fog is zapped with a beam of electrically charged particles, known as ions, water droplets become electrically charged and thus can be drawn toward a mesh of wires, similar to a window screen, placed in their path. The droplets then collect on that mesh, drain down into a collecting pan, and can be reused in the power plant or sent to a city’s water supply system.
The system, which is the basis for a startup company called Infinite Cooling that last month won MIT’s $100K Entrepreneurship Competition, is described in a paper published today in the journal Science Advances, co-authored by Maher Damak PhD ’18 and associate professor of mechanical engineering Kripa Varanasi. Damak and Varanasi are among the co-founders of the startup.
The reason for the inefficiency of existing systems became apparent in the team’s detailed lab experiments: The problem is in the aerodynamics of the system. As a stream of air passes an obstacle, such as the wires in these mesh fog-catching screens, the airflow naturally deviates around the obstacle, much as air flowing around an airplane wing separates into streams that pass above and below the wing structure. These deviating airstreams carry droplets that were heading toward the wire off to the side, unless they were headed bang-on toward the wire’s center.
The result is that the fraction of droplets captured is far lower than the fraction of the collection area occupied by the wires, because droplets are being swept aside from wires that lie in front of them. Just making the wires bigger or the spaces in the mesh smaller tends to be counterproductive because it hampers the overall airflow, resulting in a net decrease in collection.
But when the incoming fog gets zapped first with an ion beam, the opposite effect happens. Not only do all of the droplets that are in the path of the wires land on them, even droplets that were aiming for the holes in the mesh get pulled toward the wires. This system can thus capture a much larger fraction of the droplets passing through. As such, it could dramatically improve the efficiency of fog-catching systems, and at a surprisingly low cost. The equipment is simple, and the amount of power required is minimal.
Next, the team focused on capturing water from the plumes of power plant cooling towers. There, the stream of water vapor is much more concentrated than any naturally occurring fog, and that makes the system even more efficient. And since capturing evaporated water is in itself a distillation process, the water captured is pure, even if the cooling water is salty or contaminated. At this point, Karim Khalil, another graduate student from Varanasi’s lab joined the team.
“It’s distilled water, which is of higher quality, that’s now just wasted,” says Varanasi. “That’s what we’re trying to capture.” The water could be piped to a city’s drinking water system, or used in processes that require pure water, such as in a power plant’s boilers, as opposed to being used in its cooling system where water quality doesn’t matter much.
A typical 600-megawatt power plant, Varanasi says, could capture 150 million gallons of water a year, representing a value of millions of dollars. This represents about 20 to 30 percent of the water lost from cooling towers. With further refinements, the system may be able to capture even more of the output, he says.
What’s more, since power plants are already in place along many arid coastlines, and many of them are cooled with seawater, this provides a very simple way to provide water desalination services at a tiny fraction of the cost of building a standalone desalination plant. Damak and Varanasi estimate that the installation cost of such a conversion would be about one-third that of a building a new desalination plant, and its operating costs would be about 1/50. The payback time for installing such a system would be about two years, Varanasi says, and it would have essentially no environmental footprint, adding nothing to that of the original plant.
“This can be a great solution to address the global water crisis,” Varanasi says. “It could offset the need for about 70 percent of new desalination plant installations in the next decade.”
In a series of dramatic proof-of-concept experiments, Damak, Khalil, and Varanasi demonstrated the concept by building a small lab version of a stack emitting a plume of water droplets, similar to those seen on actual power plant cooling towers, and placed their ion beam and mesh screen on it. In video of the experiment, a thick plume of fog droplets is seen rising from the device — and almost instantly disappears as soon as the system is switched on.
The team is currently building a full-scale test version of their system to be placed on the cooling tower of MIT’s Central Utility Plant, a natural-gas cogeneration power plant that provides most of the campus’ electricity, heating, and cooling. The setup is expected to be in place by the end of the summer and will undergo testing in the fall. The tests will include trying different variations of the mesh and its supporting structure, Damak says.
That should provide the needed evidence to enable power plant operators, who tend to be conservative in their technology choices, to adopt the system. Because power plants have decades-long operating lifetimes, their operators tend to “be very risk-averse” and want to know “has this been done somewhere else?” Varanasi says. The campus power plant tests will not only “de-risk” the technology, but will also help the MIT campus improve its water footprint, he says. “This can have a high impact on water use on campus.”
The Latest on: Water recovery system
via Google News
The Latest on: Water recovery system
- Nestle needs water to expand, but critics aren’t backing downon November 29, 2019 at 7:36 pm
But advocates for the springs and the Santa Fe River system believe it’s folly to allow the company to pump that much water when the system is under a recovery plan to try to ensure enough water will ...
- Los Osos Water Damage Specialists Announces Emergency Steps To Follow When The House Is Floodingon November 17, 2019 at 11:00 pm
Recovery can be addressed later after everyone is safe and the waters have receded. Broken pipes, plumbing or sewer failures, and leaking roofs can cause flooding inside homes or businesses. Except in ...
- FOG removal from water in power generation facilitieson November 8, 2019 at 10:08 am
In order to prevent any oily water from escaping into the environment, power plants are focused on recovery of the waste oil before the water is reused, treated, filtered or discharged into a waterway ...
- Energy Recovery, Inc. (ERII) CEO Chris Gannon on Q3 2019 Results - Earnings Call Transcripton October 31, 2019 at 10:07 pm
Energy Recovery, Inc. (NASDAQ:ERII ... more robust than ever before and I'm extremely proud of the work our team is doing to advance the system. Commercialization is the priority and we are executing ...
- Energy Recovery Awarded $12.2 Million for Water Projects, Includes Facility to Support World Cupon October 17, 2019 at 6:07 am
With award-winning technology, Energy Recovery simplifies complex industrial systems while improving productivity, profitability, and efficiency within the water, oil & gas, and chemical processing ...
- Nutrient recovery system to be built for world’s largest reclamation plant in ILon September 15, 2019 at 5:00 pm
MWRD selects Black & Veatch and Ostara to design-build a nutrient recovery system at Stickney Water Reclamation Plant in Cicero, IL. Sep 16th, 2013 CHICAGO, IL, Sept. 16, 2013 -- Black & Veatch and ...
- Recovery funds help quadruple PA's investment in critical repairs, upgrades to water systemson August 2, 2019 at 5:00 pm
HARRISBURG, PA, Aug. 3, 2009 -- Funds from the American Recovery and Reinvestment Act have helped Pennsylvania dramatically increase the amount of money available for repairs and upgrades to failing ...
- STUDY OF OIL-WATER-SURFACTANT MULTIPHASE SYSTEMS. BEHAVIOUR IN POROUS MEDIA AND OPTIMIZATION OF OIL RECOVERY.on July 3, 2019 at 12:27 am
THE AIM OF THIS PROJECT IS TO OPTIMIZE THE CHOICE AND THE CONCENTRATION OF THE SURFACTANTS USED IN ENHANCED SECONDARY OIL RECOVERY. Several model oil water surfactant multiphase microemulsion systems ...
- MBR Wastewater Treatment Pilot System For Water Recovery & Reuseon May 28, 2019 at 5:00 pm
Unlike conventional activated sludge systems that rely on gravity-based settlement of the mixed liquor, newterra membrane bioreactor (MBR) systems use ultrafiltration (UF) membranes as a physical ...
via Bing News