To develop micro- and biomimetic-robots, artificial muscles and medical devices, actuating materials that can reversibly change their volume under various stimuli are researched in the past thirty years to replace traditional bulky and heavy actuators including motors and pneumatic actuators.
A mechanical engineering team led by Professor Alfonso Ngan Hing-wan, Chair Professor in Materials Science and Engineering, and Kingboard Professor in Materials Engineering, Faculty of Engineering, the University of Hong Kong (HKU) published an article in Science Robotics on 30 May 2018 (EST) that introduces a novel actuating material – nickel hydroxide-oxyhydroxide – that can be powered by visible (Vis) light, electricity, and other stimuli. The material actuation can be instantaneously triggered by Vis light to produce a fast deformation and exert a force equivalent to 3000 times of its own weight. The material cost of a typical actuator is as low as HKD 4 per cm2 and can be easily fabricated within three hours.
Among various stimuli, light-induced actuating materials are highly desirable because they enable wireless operation of robots. However, very few light driven materials are available in the past, and their material and production costs are high, which hinder their development in actual applications such as artificial muscles for robotics and human assist device, and minimally invasive surgical and diagnostic tools.
Developing actuating materials was identified as the top of the 10 challenges in “The grand challenges of Science Robotics”1. Research in actuating materials can radically change the concept of robots which are now mainly motor-driven. Therefore, materials that can be actuated by wireless stimuli including a change in temperature, humidity, magnetic fields and light is one of the main research focus in recent years. In particular, a material that can be actuated by Vis light and produces strong, quick and stable actuation has never been achieved. The novel actuating material system – nickel hydroxide-oxyhydroxide that can be actuated by Vis light at relatively low intensity to produce high stress and speed comparable to mammalian skeletal muscles has been developed in this research initiated by engineers in HKU.
In addition to its Vis light actuation properties, this novel material system can also be actuated by electricity, enabling it to be integrated into the present well-developed robotics technology. It is also responsive to heat and humidity changes so that they might potentially be applied in autonomous machines that harness the tiny energy change in the environment. Because the major component is nickel, the material cost is low. The fabrication only involves electrodeposition which is a simple process, and the time required for the fabrication is around three hours, therefore the material can be easily scaled up and manufactured in industry.
The newly invented nickel hydroxide-oxyhydroxide responses to light almost instantaneously and produces a force corresponding to about 3000 times of its own weight (Figure 1).
1 Yang, Guang-Zhong, et al. “The grand challenges of Science Robotics.” Science Robotics 3.14 (2018): eaar7650.
When integrated into a well-designed structure, a “mini arm” made by two hinges of actuating materials can easily lift an object 50 times of its weight (Figure 2). Similarly, by utilizing a light blocker, a mini walking-bot in which only the “front leg” bent and straighten alternatively and therefore moves under illumination was made so that it can walk towards the light source (Figure 3). These demonstrate that future applications in micro-robotics including rescue robots are possible.
The evidences above revealed that this nickel hydroxide-oxyhydroxide actuating material can have different applications in the future, including rescue robots or other mini-robots. The intrinsic actuating properties of the materials obtained from our research show that by scaling up the fabrication, artificial muscles comparable to that of mammalian skeletal muscles can be achieved, and applying it in robotics, human assist device and medical devices are possible.
From a scientific point of view, this nickel hydroxide-oxyhydroxide actuating material is the world’s first material system that can be actuated directly by Vis light and electricity without any additional fabrication procedures. This also opens up a new research field on light-induced actuating behaviour for this material type (hydroxide-oxyhydroxides) because it has never been reported before.
The Latest on: Actuating materials
via Google News
The Latest on: Actuating materials
- Materials for Smart Systems IIon November 23, 2020 at 3:25 pm
Papers on alternative sensing and actuating mechanisms are featured. Materials for gas sensors, electrochromic devices, magnetorheological fluids and thermoplastic elastomers are described.
- Materials and Devices for Smart Systems IIIon November 23, 2020 at 1:05 pm
This book bridges the fields of smart materials, sensing and actuating devices, and intelligent/smart systems, and provides an opportunity for researchers from related disciplines to build an ...
- The Year 2035: Rahmani Conceptualizes a Breathtaking 3D Printed Self-Actuating Voronoi Caron November 20, 2020 at 4:00 pm
A curated collection of industry and product deep-dives. This time, Max and I got to speak with 3D Systems’ CEO Jeff Graves. Graves has spent over 17 years in corporate leadership roles and now ...
- In situ stiffness manipulation using elegant curved origamion November 17, 2020 at 4:00 pm
The frame and the sliding trench of the swimming robot are fabricated using an Ender 3 Pro 3D printer from Shenzhen Creality 3D Technology Co. Ltd. using polylactic acid materials. A 304-mm balloon ...
- Smart actuating materials can transform biomedical technologieson November 4, 2020 at 10:20 pm
The focus of today's biomedical research is not far from this. Today a new class of smart actuating materials is transforming future (and present) biomedical technologies, taking sci-fi ...
- Smart Process Application Market Report 2020 | Industry Trends, Size, Share, Growth and Forecast to 2025on November 4, 2020 at 10:31 am
It uses complex algorithms and data management solutions to perform actuating, sensing ... and industry analysis for biotechnology, advanced materials, pharmaceuticals, food and beverage, travel ...
- Shaping the future of biomedical applicationson November 4, 2020 at 6:21 am
The focus of today’s biomedical research is not far from this. Today a new class of smart actuating materials is transforming future (and present) biomedical technologies, taking sci-fi applications ...
- Nozzle, tip assembly designed to improve moldingon November 1, 2020 at 4:00 pm
a self-actuating gas-assist injection molding nozzle and a self ... and is usable with stiff and glass-filled materials. Other sizes, tip openings, and angles are available to fit any machine?s ...
- Switch Typeson August 17, 2020 at 11:52 am
The simplest type of switch is one where two electrical conductors are brought in contact with each other by the motion of an actuating mechanism ... can also be designed to detect the level of solid ...
via Bing News