New robot concept uses responsive materials to swim through water
Engineers at Caltech and ETH Zurich have developed robots capable of self-propulsion without using any motors, servos, or power supply. Instead, these first-of-their-kind devices paddle through water as the material they are constructed from deforms with temperature changes.
The work blurs the boundary between materials and robots. In the self-propelled devices, the material itself makes the machine function. “Our examples show that we can use structured materials that deform in response to environmental cues, to control and propel robots,” says Daraio, professor of mechanical engineering and applied physics in Caltech’s Division of Engineering and Applied Science, and corresponding author of a paper unveiling the robots that appears in the Proceedings of the National Academy of Sciences on May 15.
The new propulsion system relies on strips of a flexible polymer that is curled when cold and stretches out when warm. The polymer is positioned to activate a switch inside the robot’s body, that is in turn attached to a paddle that rows it forward like a rowboat.
The switch is made from a bistable element, which is a component that can be stable in two distinct geometries. In this case, it is built from strips of an elastic material that, when pushed on by the polymer, snaps from one position to another.
When the cold robot is placed in warm water, the polymer stretches out, activates the switch, and the resulting sudden release of energy paddles the robot forward. The polymer strips can also be “tuned” to give specific responses at different times: that is, a thicker strip will take longer to warm up, stretch out, and ultimately activate its paddle than a thinner strip. This tunability allows the team to design robots capable of turning and moving at different speeds.
The research builds on previous work by Daraio and Dennis Kochmann, professor of aerospace at Caltech. They used chains of bistable elements to transmit signals and build computer-like logic gates.
In the latest iteration of the design, Daraio’s team and collaborators were able to link up the polymer elements and switches in such a way to make a four-paddled robot propel itself forward, drop off a small payload (in this case, a token with a Caltech seal emblazoned on it), and then paddle backward.
“Combining simple motions together, we were able to embed programming into the material to carry out a sequence of complex behaviors,” says Caltech postdoctoral scholar Osama R. Bilal, co-first author of the PNASpaper. In the future, more functionalities and responsivities can be added, for example using polymers that respond to other environmental cues, like pH or salinity. Future versions of the robots could contain chemical spills or, on a smaller scale, deliver drugs, the researchers say.
Currently, when the bistable elements snap and release their energy, they must be manually reset in order to work again. Next, the team plans to explore ways to redesign the bistable elements so that they are self-resetting when water temperature shifts again—making them potentially capable of swimming on indefinitely, so long as water temperature keeps fluctuating.
Learn more: No Motor, No Battery, No Problem
The Latest on: Self-propelling robots
via Google News
The Latest on: Self-propelling robots
- Cheetahs inspire LEAP in development of soft roboticson May 11, 2020 at 2:47 am
Cheetahs have inspired the development of LEAP, a new type of soft robot that can move more quickly on solid surfaces than previous soft robots.
- The best lawnmowers to buy for lockdown gardeningon May 9, 2020 at 10:01 pm
A self-propelling cordless mower with rear-wheel drive, the Husqvarna LC 141iV (£599) has an impressive spec and a stylish design. It comes with a digital keypad to display operation modes in one ...
- Building An Electric Scooter That’s Street Legal, Even In Germanyon May 7, 2020 at 5:00 pm
Sometimes a successful project isn’t only about making sure all the electrons are in the right place at the right time, or building something that won’t collapse under its own weight.
- Handheld Propulsion Is Noisy, Awesomeon May 7, 2020 at 5:00 pm
[Ivan Miranda] decided to use this to his advantage, building the Handheld Self Propelling System #1. Yes, we’ll come right out and say it – it’s a giant fan, and it blows. Or more ...
- Microbot Medical Inc.on May 5, 2020 at 5:00 pm
Stocks: Real-time U.S. stock quotes reflect trades reported through Nasdaq only; comprehensive quotes and volume reflect trading in all markets and are delayed at least 15 minutes. International ...
- Microbot Medical Incon May 4, 2020 at 5:00 pm
Microbot Medical, Inc. is a pre-clinical medical device ... The TipCat platform, a self-propelling, flexible, and semi-disposable endoscope provides see-and-treat capabilities within tubular ...
- Kirigami/origami: unfolding the new regime of advanced 3D microfabrication/nanofabrication with “folding”on April 29, 2020 at 9:30 pm
Advanced kirigami/origami provides an automated technique for modulating the mechanical, electrical, magnetic and optical properties of existing materials, with remarkable flexibility, diversity ...
- Self-propelling nanorobots ferry drugs to cancer cellson March 30, 2020 at 5:00 pm
Researchers have invented self-propelling nanorobots that can precisely target and ... could propel upward and then move gradually in a downward direction. Since the robots contain magnetic ...
- MBOT.PH - Microbot Medical Inc Profile | Reuterson September 29, 2019 at 8:33 am
Microbot Medical Inc., formerly StemCells ... hydrocephalus and normal pressure hydrocephalus (NPH), and TipCAT, a self-propelling, semi-disposable endoscope that the Company is developing ...
via Bing News