What if you could test for cocaine, opioids and marijuana as quickly as a breathalyzer identifies alcohol?
A new, low-cost chemical sensing chip brings us one step closer to this technology, which has long been on the wish list of police officers and others looking to monitor drug use and curb dangerous driving.
The chip could be integrated into a handheld, portable device for detecting drugs in biological samples such as blood, breath, urine or spit.
“Currently, there is a great demand for on-site drug testing,” says Qiaoqiang Gan, PhD, associate professor of electrical engineering in the University at Buffalo School of Engineering and Applied Sciences. “The high-performance chip we designed was able to detect cocaine within minutes in our experiments. It’s also inexpensive: It can be produced using raw materials that cost around 10 cents, and the fabrication techniques we used are also low-cost.”
“In the future, we are hoping to also use this technology to detect other drugs, including marijuana,” he adds. “The widening legalization of marijuana raises a lot of societal issues, including the need for a system to quickly test drivers for drug use.”
Gan developed the new chip with a team that included first authors Jun Gao, a research associate of Material Sciences at Fudan University in China, and Nan Zhang, a PhD candidate at UB, along with colleagues from the UB Department of Electrical Engineering; the UB Research Institute on Addictions; and the UB Department of Community Health and Health Behavior in the UB School of Public Health and Health Professions.
The study, funded by the National Science Foundation, was published on May 7 in the journal Small Methods.
Detecting the chemical fingerprint of cocaine and other drugs
The new chip is an engineered nanostructure that traps light at the edges of gold and silver nanoparticles. When biological or chemical molecules land on the chip’s surface, some of the captured light interacts with the molecules and is “scattered” into light of new energies. This effect occurs in recognizable patterns that act as fingerprints, revealing information about what compounds are present.
Because all chemicals — cocaine, opioids, and active ingredients in marijuana — have their unique light-scattering signatures, researchers can use the technology to quickly identify a wide range of chemicals.
This sensing method is called surface-enhanced Raman spectroscopy (SERS), and it’s not new. But the chip that Gan’s team developed is noteworthy for its high performance and low cost.
“SERS holds a lot of promise for rapid detection of drugs and other chemicals, but the materials required to perform the sensing are usually quite expensive,” Zhang says. “The chips used for SERS are typically fabricated using expensive methods, such as lithography, which creates specific patterns on a metal substrate. We created our chip by depositing various thin layers of materials on a glass substrate, which is cost-effective and suitable for industrial-scale production.”
An optical layer cake
The new chip — a structure known as a metasurface — resembles a layer cake, with several horizontal layers of material sitting atop one another.
Specifically, the technology consists of a sheet of dielectric material (e.g. silicon dioxide, aluminum oxide, etc.) sandwiched between a silver mirror (the base of the chip) and a hybrid nanomaterial made from gold and silver nanoparticles (the chip’s active surface).
This architecture is ideal for SERS: Molecules of cocaine or other substances fall into the tiny spaces between the nanoparticles on the chip’s surface. Then, when the structure is exposed to light for testing, the silver mirror and the dielectric layer act as an “optical cavity,” manipulating light in a way that increases the number of photons at the surface of the chip. Ultimately, this intensifies the scattering signature of compounds being sensed, which improves detection.
The technology has a long shelf life, with researchers finding that it performed well after a year in storage. The chip’s longevity is due in part to its surface design: The gold nanoparticles, which are deposited last, help to shield the silver nanoparticles from the air, which prevents oxidization, degradation and tarnishing.
“With our structure, we can realize both high performance and stable performance over time,” Gan says.
The next step in the research is to install the chip in a simple, portable testing device. This technology would first run blood, breath, urine or saliva through a purification process that extracts specific molecules, such as cocaine or other drugs. Then, any chemicals captured through this procedure would be transferred to the chip for detection and identification.
The Latest on: Chemical sensing chip
via Google News
The Latest on: Chemical sensing chip
- Physicists Learn to Rewire Biology on April 17, 2019 at 8:48 am
Xu is tweaking the switch to respond to specific concentrations of chemicals, which means the bacterium can serve as a sensor, she says ... in oil—simplistic models of living cells—on a chip. They ... […]
- Global e-Nose Market 2019-2023 - Development of e-Nose Chips that Can be Integrated into Smartphones on April 17, 2019 at 1:31 am
ResearchAndMarkets.com Laura Wood, Senior Press Manager [email protected] For E.S.T Office Hours Call 1-917-300-0470 For U.S./CAN Toll Free Call 1-800-526-8630 For GMT Office Hours Call ... […]
- Apple is in talks with potential suppliers of sensors for self-driving cars under its secretive 'Project Titan,' report claims on April 17, 2019 at 12:06 am
Lidar uses ultraviolet, visible, or near infrared light to image objects and can be used with a wide range of targets, including non-metallic objects, rocks, rain, chemical ... as the sensors are ... […]
- Conductive Polymers Market on Target to Reach 5290 Million US$ Growing at a CAGR of 3.9% Between 2019 to 2025: QY Research on April 16, 2019 at 2:15 am
chip packaging, sensors, plastic transistors, and ultra-capacitors. Conductive polymers are used in a wide range of electrical appliances such as energy devices, electronics, and actuators, and as an ... […]
- Evolution of MEMS Devices and Effect on Packaging and Test on April 11, 2019 at 3:00 pm
or open cavities that sense the surrounding environment (examples are acoustic devices and chemical sensing devices).” Allyson Hartzell, managing engineer, Veryst Engineering, elaborated: “Also, ... […]
- Pin-sized sensor could bring chemical ID to smartphone-sized devices on April 9, 2019 at 9:05 am
Devices called spectrometers can detect dangerous chemicals based on a unique "fingerprint ... devices recently in the journal Nature Communications ("Single-shot on-chip spectral sensors based on ... […]
- Biosensors and Nano sensors Market to Exceed US$ 76.00 Billion by 2024 on April 8, 2019 at 5:27 am
For example, they can be used to detect chemicals and gases for pollution monitoring or for medical diagnoses as blood-borne sensors or lab-on-a-chip devices. They can monitor physical parameters such ... […]
- Could intelligent sensors and smart devices in pipes fix Australia’s water crisis? on April 7, 2019 at 10:51 pm
Cane growers in the Burdekin region of Queensland, who rely on irrigation, are deploying smart sensors developed by Taggle Systems. The devices send an alert when water enriched with farm chemicals ... […]
- Sorry, graphene—borophene is the new wonder material that’s got everyone excited on April 5, 2019 at 4:29 am
And because it conducts electricity, materials scientists raised the prospect of a new era of graphene-based computer processing and a lucrative graphene chip industry to boot ... are testing its ... […]
via Bing News