Developing atomically thin ‘drumheads’ for ultra-low power communications and sensory devices
Case Western Reserve University researchers achieve cat-like ‘hearing’ with device 10,000,000,000,000 times smaller than human eardrum
CLEVELAND-Researchers at Case Western Reserve University are developing atomically thin “drumheads” able to receive and transmit signals across a radio frequency range far greater than what we can hear with the human ear.
But the drumhead is tens of trillions times (10 followed by 13 zeros) smaller in volume and 100,000 times thinner than the human eardrum.
The advances will likely contribute to making the next generation of ultralow-power communications and sensory devices smaller and with greater detection and tuning ranges.
“Sensing and communication are key to a connected world,” said Philip Feng, an associate professor of electrical engineering and computer science and corresponding author on a paper about the work published March 30 in the journal Science Advances. “In recent decades, we have been connected with highly miniaturized devices and systems, and we have been pursuing ever-shrinking sizes for those devices.”
The challenge with miniaturization: Also achieving a broader dynamic range of detection, for small signals, such as sound, vibration, and radio waves.
“In the end, we need transducers that can handle signals without losing or compromising information at both the ‘signal ceiling’ (the highest level of an undistorted signal) and the ‘noise floor’ (the lowest detectable level),” Feng said.
While this work was not geared toward specific devices currently on the market, researchers said, it was focused on measurements, limits and scaling which would be important for essentially all transducers.
Those transducers may be developed over the next decade, but for now, Feng and his team have already demonstrated the capability of their key components-the atomic layer drumheads or resonators-at the smallest scale yet.
The work represents the highest reported dynamic range for vibrating transducers of their type. To date, that range had only been attained by much larger transducers operating at much lower frequencies-like the human eardrum, for example.
“What we’ve done here is to show that some ultimately miniaturized, atomically thin electromechanical drumhead resonators can offer remarkably broad dynamic range, up to ~110dB, at radio frequencies (RF) up to over 120MHz,” Feng said. “These dynamic ranges at RF are comparable to the broad dynamic range of human hearing capability in the audio bands.”
New dynamic standard
Feng said the key to all sensory systems-from naturally occurring sensory functions in animals to sophisticated devices in engineering-is that desired dynamic range.
Dynamic range is the ratio between the signal ceiling over the noise floor and is usually measured in decibels (dB).
Human eardrums normally have dynamic range of about 60 to 100dB in the range of 10Hz to 10kHz, and our hearing quickly decreases outside this frequency range. Other animals, such as the common house cat or beluga whale (see illustration), can have comparable or even wider dynamic ranges in higher frequency bands.
The vibrating nanoscale drumheads developed by Feng and his team are made of atomic layers of semiconductor crystals (single-, bi-, tri-, and four-layer MoS2 flakes, with thickness of 0.7, 1.4, 2.1, and 2.8 nanometers), with diameters only about 1 micron.
They construct them by exfoliating individual atomic layers from the bulk semiconductor crystal and using a combination of nanofabrication and micromanipulation techniques to suspend the atomic layers over micro-cavities pre-defined on a silicon wafer, and then making electrical contacts to the devices.
Further, these atomically thin RF resonators being tested at Case Western Reserve show excellent frequency “tunability,” meaning their tones can be manipulated by stretching the drumhead membranes using electrostatic forces, similar to the sound tuning in much larger musical instruments in an orchestra, Feng said.
The study also reveals that these incredibly small drumheads only need picoWatt (pW, 10^-12 Watt) up to nanoWatt (nW, 10^-9 Watt) level of RF power to sustain their high frequency oscillations.
“Not only having surprisingly large dynamic range with such tiny volume and mass, they are also energy-efficient and very ‘quiet’ devices”, Feng said, “We ‘listen’ to them very carefully and ‘talk’ to them very gently.”
The Latest on: Ultralow-power communications
via Google News
The Latest on: Ultralow-power communications
- Geek of the Week: UW’s Vikram Iyer uses small insects to tackle big wireless computing problemson August 4, 2020 at 2:30 pm
Some of Vikram Iyer’s biggest ideas come in the smallest packages. And those packages can even be attached to insects. A PhD student at the University of Washington, Iyer works in the Paul G.
- Renesas Introduces Bluetooth Low Energy Module for Ultra-Low Power IoT Applicationson August 4, 2020 at 5:21 am
Renesas introduces RYZ012 Bluetooth module with multi-stanard wireless communication, supporting Bluetooth LE 5 and IEEE802.15.4 based standards ...
- Implantable transmitter provides wireless option for biomedical deviceson August 3, 2020 at 4:59 pm
“It facilitates a wireless communication between the sensor node or biomedical ... persistent pursuit of the next giant leap at purdue.edu. We present a 2.4GHz ultra-low power energy-harvested ...
- Ultra-low power MCUs - what makes STM32L5 MCUs specialon July 29, 2020 at 8:44 pm
Ultra-low power applications typically go through three different ... I understand that I can withdraw my consent at any time through opt-out links embedded in communication I receive or by managing ...
- Maxim Integrated Releases MAX32666 MCU for Reduced BOM Costson July 26, 2020 at 5:00 pm
The ultra-low-power dual Arm® Cortex®-M4 MCU features a floating-point unit (FPU) and Bluetooth Low Energy 5.2 for extended battery life. It combines memory, security, communications, power management ...
- Maxim Integrated's Ultra-Low-Power Dual Core Microcontroller with BLE 5.2 Shrinks BOM Costs by Up to 33 Percent for IoT Applicationson July 24, 2020 at 7:03 am
This ultra-low-power dual Arm® Cortex®-M4 MCU with floating-point unit (FPU) and Bluetooth Low Energy 5.2 (BLE 5.2) extends the device's battery life by combining robust memory, ...
- Maxim Integrated's Ultra-Low-Power Dual Core Microcontroller with BLE 5.2 Shrinks BOM Costs by Up to 33 Percent for IoT Applicationson July 21, 2020 at 1:14 am
This ultra-low-power dual Arm® Cortex®-M4 MCU with floating ... extends the device's battery life by combining robust memory, security, communications, power management and processing functions ...
- New Ultra-Low Power Sensors Can Self Chargeon July 15, 2020 at 5:00 pm
"Our ultra-low power circuit can interface with a solar cell and provide ... Achieving such a network of fluid operations and communication will require efficient, reliable power sources that can run ...
- Shaking light with soundon July 15, 2020 at 8:08 am
They are ubiquitous in modern wireless communication networks such as ... chip optical modulation with unprecedented speed and ultralow power consumption." Two new applications Using the new ...
via Bing News