A new way to process fibre optic signals has been demonstrated by UCL researchers, which could double the distance at which data travels error-free through transoceanic sub-marine cables
The new method has the potential to reduce the costs of long-distance optical fibre communications as signals wouldn’t need to be electronically boosted on their journey, which is important when the cables are buried underground or at the bottom of the ocean.
As the technique can correct the transmitted data if they are corrupted or distorted on the journey, it could also help to increase the useful capacity of fibres. This is done right at the end of the link, at the receiver, without having to introduce new components within the link itself. Increasing capacity in this way is important as optical fibres carry 99% of all data and demand is rising with increased use of the internet, which can’t be matched by the fibres’ current capacity, and changing the receivers is far cheaper and easier than re-laying cables.
To cope with this increased demand, more information is being sent using the existing fibre infrastructure with different frequencies of light creating the data signals. The large number of light signals being sent can interact with each other and distort, causing the data to be received with errors.
The study, published in Scientific Reports today and sponsored by the EPSRC, reports a new way of improving the transmission distance, by undoing the interactions that occur between different optical channels as they travel side-by-side over an optical cable.
One of the biggest global challenges we face is how to maintain communications with demand for the Internet booming – overcoming the capacity limits of optical fibres cables is a large part of solving that problem.
Professor Polina Bayvel
Study author Dr Robert Maher (UCL Electronic & Electrical Engineering), said: “By eliminating the interactions between the optical channels, we are able to double the distance signals can be transmitted error-free, from 3190km to 5890km, which is the largest increase ever reported for this system architecture. The challenge is to devise a technique to simultaneously capture a group of optical channels, known as a super-channel, with a single receiver. This allows us to undo the distortion by sending the data channels back on a virtual digital journey at the same time.”
The researchers used a ‘16QAM super-channel’ made of a set of frequencies which could be coded using amplitude, phase and frequency to create a high-capacity optical signal. The super-channel was then detected using a high-speed super-receiver and new signal processing techniques developed by the team enabled the reception of all the channels together and without error. The researchers will now test their new method on denser super-channels commonly used in digital cable TV (64QAM), cable modems (256QAM) and Ethernet connections (1024QAM).
The Latest on: Data transmission
via Google News
The Latest on: Data transmission
- Data Fusion Industry & Technological Innovation: Major Players Hitting the Reset Button | Esri, LexisNexis, INRIX, Thomson Reuterson July 13, 2020 at 3:53 am
... www.advancemarketanalytics.com/sample-report/795-global-data-fusion-market-1 Growing demand for IoT technology is accelerating the need for data transmission, propelling the data fusion market ...
- Brazil's Petrobras hires new satellite service to hasten data transmissionon July 3, 2020 at 8:23 pm
Brazilian state-run oil company Petrobras has hired a new satellite service capable of reducing data transmission timing by 75% between the company's platforms and command centers, it said in a ...
- Quantum entanglement demonstrated aboard orbiting CubeSaton June 25, 2020 at 7:00 am
"These signals could be used to implement any type of quantum communications application, from quantum key distribution for extremely secure data transmission to quantum teleportation, where ...
- 400Gbps data transmission achieved over DCI in a 75 GHz DWDM channelon June 21, 2020 at 10:11 pm
NeoPhotonics has completed experimental verification of the transmission of 400Gbps data over data center interconnect (DCI) ZR distances in a 75 GHz spaced Dense Wavelength Division Multiplexing ...
- NeoPhotonics Demonstrates 90 km 400ZR Transmission in 75 GHz DWDM Channels Enabling 25.6 Tbps per Fiber Capacityon June 18, 2020 at 5:43 am
The Company’s products enable cost-effective, high-speed over distance data transmission and efficient allocation of bandwidth in optical networks. NeoPhotonics maintains headquarters in San ...
- A Different Twist to Single-Wire Data Transmissionon June 2, 2020 at 2:03 pm
Single-wire data transmission is useful when operating a multitude of disperse components if high speed isn’t a requirement, but there’s a need for flexibility. The approach reduces the number ...
- Quebec adds 202 coronavirus deaths due to data transmission problemon May 31, 2020 at 11:10 am
Officials explain the huge spike is due to 165 deaths that weren’t counted previously due to a data transmission issue. The number of deaths recorded in the past day is actually 37 and while the ...
- Data Transmission Travel Plans – From The Ground Upon May 28, 2020 at 6:07 am
The term “cloud” was first used by the telecomm industry in early schematics of the Internet to identify the various, non-specific uses data was put to at the end of their cables. The transmission of ...
- Record-high data transmission using a soliton crystalon May 24, 2020 at 5:00 pm
Moss at Swinburne University of Technology and honorary professor at the Institut National de la Recherche Scientifique (INRS) was able to achieve world record-high data transmission over 75 km of ...
via Bing News