via Oregon State University
Researchers in Oregon State University’s College of Engineering have taken a key step toward the rapid manufacture of flexible computer screens and other stretchable electronic devices, including soft robots.
The advance by a team within the college’s Collaborative Robotics and Intelligent Systems Institute paves the way toward the 3D printing of tall, complicated structures with a highly conductive gallium alloy.
Researchers put nickel nanoparticles into the liquid metal, galinstan, to thicken it into a paste with a consistency suitable for additive manufacturing.
“The runny alloy was impossible to layer into tall structures,” said Yi?it Mengüç, assistant professor of mechanical engineering and co-corresponding author on the study. “With the paste-like texture, it can be layered while maintaining its capacity to flow, and to stretch inside of rubber tubes. We demonstrated the potential of our discovery by 3D printing a very stretchy two-layered circuit whose layers weave in and out of each other without touching.”
Findings were recently published in Advanced Materials Technologies.
Gallium alloys are already being used as the conductive material in flexible electronics; the alloys have low toxicity and good conductivity, plus they’re inexpensive and “self-healing” – able to attach back together at break points.
But prior to the modification developed at OSU, which used sonication – the energy of sound – to mix the nickel particles and the oxidized gallium into the liquid metal, the alloys’ printability was restricted to 2-dimensional.
For this study, researchers printed structures up to 10 millimeters high and 20 millimeters wide.
“Liquid metal printing is integral to the flexible electronics field,” said co-author Do?an Yirmibe?o?lu, a robotics Ph.D. student at OSU. “Additive manufacturing enables fast fabrication of intricate designs and circuitry.”
The field features a range of products including electrically conductive textiles; bendable displays; sensors for torque, pressure and other types of strain; wearable sensor suits, such as those used in the development of video games; antennae; and biomedical sensors.
“The future is very bright,” Yirmibe?o?lu said. “It’s easy to imagine making soft robots that are ready for operation, that will just walk out of the printer.”
The gallium alloy paste demonstrates several features new to the field of flexible electronics, added co-corresponding author Uranbileg Daalkhaijav, Ph.D. candidate in chemical engineering.
“It can be made easily and quickly,” Daalkhaijav said. “The structural change is permanent, the electrical properties of the paste are comparable to pure liquid metal, and the paste retains self-healing characteristics.”
Future work will explore the exact structure of the paste, how the nickel particles are stabilized, and how the structure changes as the paste ages.
Learn more: Modified, 3D-printable alloy shows promise for flexible electronics, soft robots
The Latest on: Liquid metal printing
via Google News
The Latest on: Liquid metal printing
- Researchers Demonstrate Renewable Power of Liquid Metalon December 7, 2019 at 2:39 pm
University of Texas at Dallas researchers have developed a generator prototype that uses liquid metal to convert waste heat from sources such as electric cars or data centers into clean electricity.
- Designer alloy enables 3D printing of fine-grained metalson December 4, 2019 at 10:20 am
In metal additive manufacturing, an alloy (in the form of powders or wires ... The authors propose that nucleation and CET are promoted in these alloys by the formation of a large zone of supercooled ...
- Formula 1 Debuts Its First-Ever Fragrance In Game-Changing 3D-Printed Metal Bottles Designed By Ross Lovegrove Priced At $10,000 Apieceon November 28, 2019 at 11:05 pm
Lovegrove conceived the inner glass flask containing the liquid in the shape of the plan profile of the monocoque that ... you have an opportunity to explore these principles at a very high level with ...
- New tech prints flexible electronics on odd surfaceson July 29, 2019 at 12:33 pm
A new technology allows printing of conductive metallic lines on all kinds of materials, such as a concrete wall or a leaf. The technology features liquid metal (in this case Field’s metal, an alloy ...
- Engineers use heat-free tech for flexible electronics; print metal on flowers, gelatinon July 29, 2019 at 8:28 am
The technology features liquid metal (in this case Field's metal ... creating a heat-free weld or, in this case, printing conductive, metallic lines and traces on all kinds of materials, everything ...
- Korean Researchers 3D Printing with Liquid Metalon June 27, 2019 at 12:41 am
In ‘High Resolution, reconfigurable printing of liquid metals with three-dimensional structures’ authors Young-Geun Park, Hyeon Seok An, Ju-Young Kim, and Jang-Ung Park explore a new technique outside ...
- High-resolution, reconfigurable printing of liquid metals with three-dimensional structureson June 21, 2019 at 3:23 pm
In conclusion, the work presented here demonstrates high-resolution, reconfigurable 3D printing using liquid metal and its application for stretchable 3D integrations that are difficult to achieve by ...
- Focus: X-Ray Movie Reveals Origin of Metal Splashingon June 14, 2019 at 8:56 am
Splash zone. When a high-powered laser (red) strikes a metal (transparent block) during a 3D printing process, a puddle of liquid metal (yellow) forms. Inside that puddle is a vapor-filled depression ...
- New printer can use honey or liquid metal as inkon September 7, 2018 at 5:00 pm
Inkjet printing is used for droplet-by-droplet patterning of liquids ... a microlens array using transparent optical adhesive, and liquid metal. “By harnessing acoustic forces, we have created a new ...
via Bing News