Ground-breaking lens opens new possibilities in virtual and augmented reality
Metalenses — flat surfaces that use nanostructures to focus light — promise to revolutionize optics by replacing the bulky, curved lenses currently used in optical devices with a simple, flat surface. But, these metalenses have remained limited in the spectrum of light they can focus well. Now a team of researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) has developed the first single lens that can focus the entire visible spectrum of light — including white light — in the same spot and in high resolution. This has only ever been achieved in conventional lenses by stacking multiple lenses.
The research is published in Nature Nanotechnology.
Focusing the entire visible spectrum and white light – combination of all the colors of the spectrum — is so challenging because each wavelength moves through materials at different speeds. Red wavelengths, for example, will move through glass faster than the blue, so the two colors will reach the same location at different times resulting in different foci. This creates image distortions known as chromatic aberrations.
Cameras and optical instruments use multiple curved lenses of different thicknesses and materials to correct these aberrations, which, of course, adds to the bulk of the device.
Using our achromatic lens, we are able to perform high quality, white light imaging. This brings us one step closer to the goal of incorporating them into common optical devices such as cameras.
“Metalenses have advantages over traditional lenses,” says Federico Capasso, the Robert L. Wallace Professor of Applied Physics and Vinton Hayes Senior Research Fellow in Electrical Engineering at SEAS and senior author of the research. “Metalenses are thin, easy to fabricate and cost effective. This breakthrough extends those advantages across the whole visible range of light. This is the next big step.”
The Harvard Office of Technology Development has protected the intellectual property relating to this project and has licensed it to a startup for commercial development.
The metalenses developed by Capasso and his team use arrays of titanium dioxide nanofins to equally focus wavelengths of light and eliminate chromatic aberration. Previous researchdemonstrated that different wavelengths of light could be focused but at different distances by optimizing the shape, width, distance, and height of the nanofins. In this latest design, the researchers created units of paired nanofins that control the speed of different wavelengths of light simultaneously. The paired nanofins control the refractive index on the metasurface and are tuned to result in different time delays for the light passing through different fins, ensuring that all wavelengths reach the focal spot at the same time.
“One of the biggest challenges in designing an achromatic broadband lens is making sure that the outgoing wavelengths from all the different points of the metalens arrive at the focal point at the same time,” said Wei Ting Chen, a postdoctoral fellow at SEAS and first author of the paper. “By combining two nanofins into one element, we can tune the speed of light in the nanostructured material, to ensure that all wavelengths in the visible are focused in the same spot, using a single metalens. This dramatically reduces thickness and design complexity compared to composite standard achromatic lenses.”
“Using our achromatic lens, we are able to perform high quality, white light imaging. This brings us one step closer to the goal of incorporating them into common optical devices such as cameras,” said Alexander Zhu, co-author of the study.
Next, the researchers aim to scale up the lens, to about 1 cm in diameter. This would open a whole host of new possibilities, such as applications in virtual and augmented reality.
The Latest on: Metalenses
- Metalenses can Help Create Broadband Absorbers for Solar Panelson January 6, 2020 at 10:14 am
The resolution of this metalens was found to be less than 100 nm. Nanocomposite epsilon-near-zero film works as a surface-enhanced Raman scattering substrate, and it helps not only enhance the ...
- Chipmakers could mass-produce glass metalenseson December 9, 2019 at 4:00 pm
Chemistry matters. Join us to get the news you need.
- Metalenses in focuson December 5, 2019 at 11:02 am
That’s significant because while it is recognised that metalenses – flat surfaces that use nanostructures to focus light – have the potential to revolutionise everything from microscopy to cameras, ...
- Metalenses Focus Light (image)on December 3, 2019 at 9:33 am
Forty-five, one-centimeter metalenses on a silicon wafer focus light on a sheet of paper. Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert!
- Overlaid optical metalenses have new propertieson July 31, 2019 at 5:00 pm
1 One challenge in the development of multifunctional metalenses is their limited efficiency. One possible way to improve this is to stack the metalens. By doing this, graduate student Ronghui Lin and ...
- Scientists Develop Effortless Way of Producing Multifunctional Metalenseson July 31, 2019 at 8:57 am
This means that the relative position of the light wave is in its oscillatory cycle. Such ultrathin layers are known as metalenses as they can focus light similar to a traditional, although much ...
- Why metalenses are about to revolutionize chip-makingon July 9, 2019 at 9:10 am
That’s a big step. Until now, lenses have always been made separately and then assembled into optical components. Using metalenses would allow devices such as the cameras in smartphones to be made ...
- Tiny Lenses Will Enable Design of Miniature Optical Deviceson July 1, 2019 at 2:23 pm
Engineers have recently figured out much of the physics behind much smaller, lighter alternatives known as metalenses. These lenses could allow for greater miniaturization of microscopes and other ...
- Federico Capasso: Flat optics: from high-performance metalenses to structured lighton April 23, 2019 at 5:22 pm
In this keynote presentation, Federico Capasso, professor of applied physics at Harvard University, presents advances in dielectric metalenses in the visible, which correct spherical, coma, and ...
- Broadband achromatic dielectric metalenseson November 6, 2018 at 4:00 pm
Metasurfaces offer a unique platform to precisely control optical wavefronts and enable the realization of flat lenses, or metalenses, which have the potential to substantially reduce the size and ...
via Google News and Bing News