Sandia, University of California project aimed at reducing cost of hydrogen fuel cells
Replacing your everyday gas guzzler with a hydrogen fueled car could drastically reduce your carbon footprint. So why don’t we all make the switch?
One of reasons we don’t is the expensive platinum catalyst required to operate hydrogen fuel cells efficiently.
Research led by Sandia National Laboratories and the University of California, Merced aimed at bringing down the cost of hydrogen fuel cells used a dirt-cheap compound to create an uneven surface that resembles a plant’s leaves. The additional area helps catalyze hydrogen almost as efficiently as platinum.
Lead researchers Stanley Chou, a Sandia materials scientist, and UC Merced’s Vincent Tung have applied for a joint patent for the spray-printing process, which uses inexpensive molybdenum disulfide. The increased surface area of the rippling “leaf” creates three times as many catalytic contact points as other molybdenum disulfide structures, and the new creation can handle higher temperatures than platinum without sintering and gumming up the cell.
The work is part of an effort to more cheaply power hydrogen-fueled cars, desirable because they emit water rather than carbon monoxide or carbon dioxide.
Nature as an ally
The production method uses nature as an ally rather than a hindrance, Chou said. “In traditional thinking, forces such as gravity, viscosity and surface tension must be overcome to achieve the manufactured shapes you desire. We thought, instead of thinking these forces as limitations, why not use them to do something useful? So, we did.”
Tung said the method uses natural processes to produce materials for extremely inexpensive fuel cell terminals to liberate hydrogen. “The printing process also allows for continued deposition, with the ability to scale for industry,” he said.
The team mixed molybdenum disulfide with water and used the printing process to expel micron-size droplets into an enclosed area about 2 feet high. As they dropped, the droplets first separated into nanoscopic subunits. These dried further as they fell, their shrinking volume producing an uneven 3-D surface much like the leaves of plants, with tiny ridges, hills, canals, caves and tunnels. Landing on a substrate and on each other, the “leaves” were still moist enough to bond as though attached at critical points by tiny droplets of glue. Thus, the nanostructures did not lose their individuality but instead, by maintaining their identities, created tiny tunnels within and between them that permitted extraordinary access for atoms of hydrogen to seek their freedom from chemical bonds.
The inspiration for creating a bio-inspired 3-D form arose from studying the cuticle folding process, a mechanism used by plants for controlling diffusion and permeability on leaf surfaces, Chou said.
“We see our catalyst as an inorganic material acting like a plant. The nanostructures, like leaves, are varied in shape, with tiny rises and falls,” he said. “The structures take in an external material to produce hydrogen rather than oxygen, and one day may be powered by sunlight.” Right now, very low-voltage electricity does the job.
Doubts about the strength of structure formed in such a serendipitous manner, Tung recounted, were settled when a 170-pound student unwittingly trod upon one of the first molybdenum disulfide-catalyst creations when it accidentally fell to the floor. A few hundred nanometers thick, it rested upon a centimeter-square carbon substrate but was otherwise unprotected. Elecromicroscopic investigation showed the tiny structure to be undamaged. The “leaves” also have proved to be long lasting, continuing to produce hydrogen for six months.
Learn more: Superior hydrogen catalyst just grows that way
The Latest on: Hydrogen catalyst
- Reactant friendly hydrogen evolution interface based on di-anionic MoS 2 surfaceon February 28, 2020 at 2:18 am
Engineering the reaction interface to preferentially attract reactants to inner Helmholtz plane is highly desirable for kinetic advancement of most electro-catalysis processes, including hydrogen ...
- Engineering a solid-state metalloprotein hydrogen evolution catalyston February 28, 2020 at 2:06 am
Crucial to achieving this is the ability to produce clean sources of hydrogen using renewable energy sources. Currently platinum is commonly used as a hydrogen evolution catalyst, however, the ...
- Rust and light combine for a 25x boost in hydrogen productionon February 27, 2020 at 10:05 pm
Scientists at the Tokyo University of Science have used rust as a catalyst in light-assisted hydrogen production from organic waste, finding it produces 25 times more hydrogen than previous titanium ...
- New, Efficient Way to Generate Hydrogen from Organic Waste Solutionon February 27, 2020 at 8:38 am
In this effect, titanium dioxide is used as a photocatalyst in the production of hydrogen. Based on this study, Japanese scientists went on to utilize a more readily available and more economical ...
- Don’t Fight the Power in Plug Power Stockon February 27, 2020 at 7:34 am
Plug Power’s hydrogen fuel-cell shipments have literally tripled from 10,600 units back in 2015 to over 32,000 units as of January 2020. So, the partnership with Lightning Systems is the perfectly ...
- Scientists find a more efficient way to produce hydrogen from organic wasteon February 27, 2020 at 6:29 am
The researchers think that the discovery could revolutionize the clean energy industry. The new study indicates that a form of rust called α-FeOOH along with Hg-Xe lamp irradiation can be a 25 times ...
- Energy Industry Game-Changer: Using Rust and Organic Waste to Produce Hydrogen Fuelon February 27, 2020 at 5:35 am
Scientists identify a new and efficient way of producing hydrogen from organic waste solution using a catalyst derived from — of all things — rust. In today’s narrative of climate change, pollution, ...
- Motley crew: Rust and light a possible answer to the conundrum of hydrogen fuel productionon February 26, 2020 at 9:29 am
In the 1970s, two scientists described the Honda-Fujishima effect, which uses titanium dioxide as a photocatalyst in hydrogen production. Building on this research, a team of Japanese researchers led ...
- Scientists find way to make tiny DIAMONDS quickly with surprisingly little heat and no catalyston February 26, 2020 at 6:37 am
Scientists have developed a way to make tiny diamonds quickly and easily with surprisingly little heat and no catalyst. The technique involves extracting special cage ... Unlike real diamonds, which ...
- Russian scientists found an effective way to obtain fuel for hydrogen engineson February 20, 2020 at 7:29 am
ne of the most promising alternative energy sources is hydrogen, which can be extracted from water and air. A catalyst is needed for a chemical process that releases hydrogen from an H2O molecule. It ...
via Google News and Bing News