Fusion is the process that powers the sun, harnessing it on Earth would provide unlimited clean energy. However, researchers say that constructing a fusion power plant has proven to be a daunting task, in no small part because there have been no materials that could survive the grueling conditions found in the core of a fusion reactor. Now, researchers at Texas A&M University have discovered a way to make materials that may be suitable for use in future fusion reactors.
The sun makes energy by fusing hydrogen atoms, each with one proton, into helium atoms, which contain two protons. Helium is the byproduct of this reaction. Although it does not threaten the environment, it wreaks havoc upon the materials needed to make a fusion reactor.
“Helium is an element that we don’t usually think of as being harmful,” said Dr. Michael Demkowicz, associate professor in the Department of Materials Science and Engineering. “It is not toxic and not a greenhouse gas, which is one reason why fusion power is so attractive.”
However, if you force helium inside of a solid material, it bubbles out, much like carbon dioxide bubbles in carbonated water.
“Literally, you get these helium bubbles inside of the metal that stay there forever because the metal is solid,” Demkowicz said. “As you accumulate more and more helium, the bubbles start to link up and destroy the entire material.”
Working with a team of researchers at Los Alamos National Laboratory in New Mexico, Demkowicz investigated how helium behaves in nanocomposite solids, materials made of stacks of thick metal layers. Their findings, recently published in Science Advances, were a surprise. Rather than making bubbles, the helium in these materials formed long channels, resembling veins in living tissues.
“We were blown away by what we saw,” Demkowicz said. “As you put more and more helium inside these nanocomposites, rather than destroying the material, the veins actually start to interconnect, resulting in kind of a vascular system.”
This discovery paves the way to helium-resistant materials needed to make fusion energy a reality. Demkowicz and his collaborators believe that helium may move through the networks of veins that form in their nanocomposites, eventually exiting the material without causing any further damage.
Demkowicz collaborated with Di Chen, Nan Li, Kevin Baldwin and Yongqiang Wang from Los Alamos National Laboratory, as well as former student Dina Yuryev from the Massachusetts Institute of Technology. The project was supported by the Laboratory Directed Research and Development program at Los Alamos National Laboratory.
“Applications to fusion reactors are just the tip of the iceberg,” Demkowicz said. “I think the bigger picture here is in vascularized solids, ones that are kind of like tissues with vascular networks. What else could be transported through such networks? Perhaps heat or electricity or even chemicals that could help the material self-heal.”
The Latest on: Fusion energy
- 2020 Insights into Sensor Fusion Suppliers - Key Differentiators for Major Suppliers - ResearchAndMarkets.comon July 2, 2020 at 9:56 am
The "Leadership Quadrant of Sensor Fusion Suppliers - 2019" report has been added to ResearchAndMarkets.com's offering.
- Fusion Beverages Market to Witness Contraction, as Uncertainty Looms Following Global Coronavirus Outbreakon July 2, 2020 at 5:29 am
A recent market study published by FMI "Fusion Beverage Market: Global Industry Analysis 2014-2018 & Forecast 2019-2029" offers a comprehensive assessment of the most important market dynamics. After ...
- Key Device Made In India For Global Project To Study Nuclear Fusionon July 1, 2020 at 3:07 pm
Engineering and construction giant Larsen & Toubro said it has achieved a major milestone under 'Make in India' initiative by building a cryostat for the USD 20 billion global fusion project.
- Is the holy grail of energy finally within reach... and will it work?on July 1, 2020 at 9:24 am
Since the first demonstration in the 1930s, hundreds of reactors have been built all over the world. Not one has produced a single gigawatt of energy, nor will they for decades. But that’s not the ...
- Maths ‘noodling’ could lead to more twisty plasmas in nuclear fusionon July 1, 2020 at 4:22 am
Researchers take another step closer to stable nuclear fusion after learning more about a ‘hiccup’ known as the sawtooth instability.
- Mathematical noodling leads to new insights into an old fusion problemon June 30, 2020 at 2:04 pm
A challenge to creating fusion energy on Earth is trapping the charged gas known as plasma that fuels fusion reactions within a strong magnetic field and keeping the plasma as hot and dense as ...
- L&T despatches cryostat lid for $20 billion global fusion projecton June 30, 2020 at 10:13 am
The heavy engineering division of Larsen & Toubro Ltd (L&T) on Tuesday despatched a giant Cryostat lid, the most complex and final assembly of Cryostat, the largest stainless-steel, high-vacuum ...
- L&T builds key cryostat for world’s largest nuclear fusion reactor in France for $20 billionon June 30, 2020 at 5:25 am
"This is an important milestone in the global nuclear fusion arena as well as a moment of pride for the Make in India initiative," the company said in a statement.
- Larsen & Toubro builds cryostat for $20 billion global fusion projecton June 30, 2020 at 5:18 am
The final assembly or top lid sectors of the cryostat, a key part of the world's largest nuclear fusion reactor being built in France, were dispatched on Tuesday from the company's Hazira ...
- L&T flags off giant, sophisticated component for international fusion projecton June 30, 2020 at 3:55 am
L&T on Tuesday ceremoniously flagged off the final component of a gigantic ‘cryostat’ — a monstrously large ‘refrigerator’ — for a global, mega-science project to build a fusion reactor in sou ...
via Google News and Bing News