A new generation of microsensors could provide the vital link between food products and the Internet of Things. ETH researchers have developed an ultra-thin temperature sensor that is both biocompatible and biodegradable.
Nowadays microsensors are already used in many different applications, such as the detection of poisonous gases. They are also integrated into miniaturised transmitter/receiver systems, such as the ubiquitous RFID chips. However, as the sensors often contain precious metals that are harmful to both the environment and human health, they are not suitable for medical applications involving direct contact with the human body or for inclusion in food products. There is therefore a high level of interest, both in research and industry, in developing microsensors made from non-toxic materials that are also biodegradable.
Magnesium wire and compostable polymer
A team of researchers led by Giovanni Salvatore, post-doc in the Electronics Laboratory, has been working with scientists from other ETH institutes on the development of biodegradable microsensors for temperature measurement. They have just reported their findings in the scientific journal “Advanced Functional Materials”. The biocompatible microsensors are created by encapsulating a superfine, tightly wound electrical filament made of magnesium, silicon dioxide and nitride in a compostable polymer. Magnesium is an important component of our diet, while silicon dioxide and nitride are biocompatible and dissolvable in water. The polymer in question is produced from corn and potato starch, and its composition complies with EU and US foodstuff legislation.
Giovanni Salvatore, a postdoctoral researcher working in Professor Tröster’s group, is convinced that these biodegradable microsensors have a bright future. As an example, he cites one potential application: “In preparation for transport to Europe, fish from Japan could be fitted with tiny temperature sensors, allowing them to be continuously monitored to ensure they are kept at a cool enough temperature.” This requires sensors that are suitable for use in foodstuffs and are no threat to consumer health. The sensors also need to be small, robust and flexible enough to survive in containers full of fish or other food products.
Thinner than a single hair filament
The sensor developed by researchers is only 16 micrometres thick, making it much thinner than a human hair (100 micrometres), and – being only a few millimetres in length – weighs no more than a fraction of a milligram. In its current form, the sensor dissolves completely in a one-percent saline solution over the course of 67 days. At present, the sensor continues to function for one day when completely submersed in water. This time would be sufficient to monitor a shipment of fish from Japan to Europe. “But it’s relatively easy to extend the operating life by adjusting the thickness of the polymer,” Salvatore says. A thicker sensor would be less flexible, however. The current sensor is so thin that it continues to function even if it is completely crumpled or folded. Even when stretched by around 10% of its original size, the sensor remains intact.
For the power supply, researchers have connected the sensor to an external micro battery using ultra-thin, biodegradable zinc cables. On the same (non-biodegradable) chip there is a microprocessor and a transmitter that sends the temperature data via Bluetooth to an external computer. This makes it possible to monitor the temperature of a product over a range of 10 to 20 metres.
Biosensors will become commonplace
Producing biocompatible microsensors is currently a very time-consuming and expensive process. However, Salvatore is confident that it will soon be possible to produce such sensors for the mass market, especially as the methods of printing electronic circuits are becoming increasingly sophisticated. “Once the price of biosensors falls enough, they could be used virtually anywhere,” Salvatore says. Sensors would provide the link between the physical and digital world, bringing food products into the “Internet of Things”. Their use would not be limited to temperature measurement either: similar microsensors could be deployed to monitor pressure, gas build-up and UV exposure.
Salvatore predicts that these biodegradable sensors will be part of our everyday lives within 5 to 10 years, depending on the level of interest shown by industry. By that time, the battery, processor and transmitter would probably be integrated into the microsensor, Salvatore explains. A lot more research is still required before these components can be used without concerns for human health or the environment. The team is therefore currently searching for a biocompatible energy source to power its sensor.
Learn more: Biodegradable microsensors for food monitoring
The Latest on: Microsensor
- Digital ag is Cornell’s newest radical collaboration initiative on February 14, 2019 at 7:05 am
Stroock has long been drawn to engineering that interfaces with plant life; several years ago he developed a synthetic plant to study how water is managed in plant biology and, with Alan Lakso, profes... […]
- Robots on Farms Could Fight Climate Change and Grow More Food on February 13, 2019 at 11:14 am
The stream, density, and resolution of a wide range of data from satellites are continuously improving. With low-cost wireless micro-sensor technologies, these data can be relayed to remote control st... […]
- Global Renal Dialysis Equipment Market Report 2019: Analysis & Forecasts 2015-2024 with Industry Guide & Contact Details for 70 Companies on February 13, 2019 at 9:30 am
2.5 Role of Hormone Replacement Therapy in Kidney Dialysis Patients 2.6 Innovative Microsensor Enables Kidney Dialysis to be Customized 2.7 New Lipid-Like Dialysis Membrane can Limit the Side Effects ... […]
- After 48 hours with my sensor, I feel kind of more diabetic than before on February 2, 2019 at 1:12 pm
“Sure. This is where I wear it, too.” Wait, what? He touches his abdomen to point out the position of his micro-sensor. “I am testing it, I have tried many spots (legs, hips, shoulders ... […]
- Full carbonate chemistry at the site of calcification in a tropical coral on January 16, 2019 at 11:00 am
"By combining microscopy and microsensor measurements, we directly measured calcium, carbonate and pH at the site of calcification in coral microcolonies of Stylophora pistillata and derived important ... […]
- Micro sensor package can ride aboard bees on December 14, 2018 at 1:04 pm
Washington - Assessing the state of agricultural environments can be assessed using drones, which provide the big picture. What about more sensitive evaluations? The answer is to fit sensors to bees. ... […]
- Si-Ware Systems Launches NeoSpectra-Micro Sensor with 1,100 and 2,500 nm Operating Range on November 8, 2018 at 5:12 am
LOS ANGELES, Nov. 7, 2018 /PRNewswire/ -- Si-Ware Systems (SWS) announced that it has launched volume production of the smallest highly accurate spectral sensor for analyzing samples of almost any mat... […]
- Human on Chip : Microsensor unit and control algorithm integration for brain on a chip drug testing applications and development on September 13, 2018 at 5:00 pm
"Cherry Biotech is an innovative French company which develops and commercializes microfluidic instruments for life sciences and healthcare. We position ourselves on a biological research market in wh... […]
- Australian scientists say new "micro-sensor" could revolutionize health care on June 6, 2018 at 10:50 pm
CANBERRA, June 7 (Xinhua) -- Scientists from the Australian National University (ANU) in Canberra have designed microscopic optical sensors that could enable real-time health monitoring. The sensors, ... […]
- New microsensor enables kidney dialysis customization on March 27, 2018 at 5:17 am
Researchers from TU Eindhoven have developed a microsensor that makes it possible to directly monitor and adjust the composition of kidney dialysis fluid. This is a crucial step towards patient specif... […]
via Google News and Bing News