Scientists at the U.S. Department of Energy’s (DOE) National Renewable Energy Laboratory (NREL) developed a new perovskite ink with a long processing window that allows the scalable production of perovskite thin films for high-efficiency solar cells.
Proven highly efficient at converting sunlight into electricity, perovskite solar cells have yet to move beyond the laboratory. The crystalline structure of perovskites must be carefully grown upon a substrate, which is normally done by laboratory-scale spin coating – a technology that can’t be scaled to large-scale manufacturing. The best devices fabricated using scalable deposition methods, which are suitable for future module production, still lag behind state-of-the-art spin-coated devices.
How the NREL scientists overcame this obstacle is spelled out in a new paper published in Nature Energy, Perovskite ink with wide processing window for scalable high-efficiency solar cells. Kai Zhu, a senior scientist in NREL’s Chemistry and Nanoscience Center, is lead author. The co-authors are Mengjin Yang, Zhen Li, Matthew Reese, Obadiah Reid, Dong Hoe Kim, Sebastian Siol, Talysa Klein, Joseph Berry, and Michael van Hest from NREL, and Yanfa Yan from the University of Toledo.
To create a perovskite film, a coating of chemicals is deposited on a substrate and heated to fully crystalize the material. The various steps involved often overlap with each other and complicate the process. One extremely critical stage requires the addition of an antisolvent that extracts the precursor chemicals, and thus create crystals of good quality. The window for this step opens and closes within seconds, which is detrimental for manufacturing due to the precision required to make this time window.
NREL researchers were able to keep that window open as long as 8 minutes.
The formula for the precursor perovskite ink included a chlorine-containing methylammonium lead iodide precursor along with solvent tuning, coupled with an antisolvent, which could be deposited onto the substrate by either spin-coating or blade-coating methods. Both methods were tested and produced indistinguishable film morphology and device performance. Blade-coating is more attractive to manufacturers because it can easily be scaled up.
The researchers tested one precursor ink containing excess methylammonium iodide (MAI) and a second containing added methylammonium chloride (MACI). The MACI proved most effective in reducing the length of heat treatment the perovskites require, cutting the time to about a minute compared to 10 minutes for the MAI solution. The shorter time also should make the process more attractive to manufacturers.
Using blade-coated absorbers, NREL scientists made a four-cell perovskite module measuring about 12.6-square centimeters. Of that, 11.1-square centimeters were active in converting sunlight to energy and did so with a stabilized efficiency of 13.3 percent.
The Latest on: Perovskite thin solar films
- Swansea University: £6m grant to develop solar cell technologyon August 2, 2020 at 6:34 am
Its ultra-thin, light-weight photovoltaic films could generate electricity ... Image copyright Swansea University Image caption The perovskite solar cells are very flexible Project lead Prof ...
- Perovskite Solar Cells Are Just About Ready for Prime Timeon July 29, 2020 at 5:00 pm
Perovskite is being eyed as a leading next-generation material in a type of solar cells called thin-film. The material is a calcium titanium oxide mineral composed of calcium titanate, and has ...
- New fabrication method brings single-crystal perovskite devices closer to viabilityon July 29, 2020 at 8:01 am
The perovskite resides at the neutral mechanical ... crystal film to be incorporated into high-efficient flexible thin film solar cells, and into wearable devices, contributing toward the goal ...
- News tagged with perovskiteon July 28, 2020 at 5:01 pm
Nanoengineers at UC San Diego developed a new method to fabricate perovskites as single-crystal thin films, which are more efficient for use in solar cells and optical devices than the current ...
- A fabrication process for flexible single-crystal perovskite deviceson July 28, 2020 at 5:01 pm
3: Bandgap-graded single-crystal perovskite thin films. Fig. 4: Flexible bandgap ... lead-halide-based perovskite layers for efficient solar cells. Science 356, 1376–1379 (2017).
via Google News and Bing News