World’s most abundant polymer could rival petroleum-based plastics as source of printing feedstock.
For centuries, cellulose has formed the basis of the world’s most abundantly printed-on material: paper. Now, thanks to new research at MIT, it may also become an abundant material to print with — potentially providing a renewable, biodegradable alternative to the polymers currently used in 3-D printing materials.
“Cellulose is the most abundant organic polymer in the world,” says MIT postdoc Sebastian Pattinson, lead author of a paper describing the new system in the journal Advanced Materials Technologies. The paper is co-authored by associate professor of mechanical engineering A. John Hart, the Mitsui Career Development Professor in Contemporary Technology.
Cellulose, Pattinson explains, is “the most important component in giving wood its mechanical properties. And because it’s so inexpensive, it’s biorenewable, biodegradable, and also very chemically versatile, it’s used in a lot of products. Cellulose and its derivatives are used in pharmaceuticals, medical devices, as food additives, building materials, clothing — all sorts of different areas. And a lot of these kinds of products would benefit from the kind of customization that additive manufacturing [3-D printing] enables.”
Meanwhile, 3-D printing technology is rapidly growing. Among other benefits, it “allows you to individually customize each product you make,” Pattinson says.
Using cellulose as a material for additive manufacturing is not a new idea, and many researchers have attempted this but faced major obstacles. When heated, cellulose thermally decomposes before it becomes flowable, partly because of the hydrogen bonds that exist between the cellulose molecules. The intermolecular bonding also makes high-concentration cellulose solutions too viscous to easily extrude.
Instead, the MIT team chose to work with cellulose acetate — a material that is easily made from cellulose and is already widely produced and readily available. Essentially, the number of hydrogen bonds in this material has been reduced by the acetate groups. Cellulose acetate can be dissolved in acetone and extruded through a nozzle. As the acetone quickly evaporates, the cellulose acetate solidifies in place. A subsequent optional treatment replaces the acetate groups and increases the strength of the printed parts.
“After we 3-D print, we restore the hydrogen bonding network through a sodium hydroxide treatment,” Pattinson says. “We find that the strength and toughness of the parts we get … are greater than many commonly used materials” for 3-D printing, including acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA).
To demonstrate the chemical versatility of the production process, Pattinson and Hart added an extra dimension to the innovation. By adding a small amount of antimicrobial dye to the cellulose acetate ink, they 3-D-printed a pair of surgical tweezers with antimicrobial functionality.
“We demonstrated that the parts kill bacteria when you shine fluorescent light on them,” Pattinson says. Such custom-made tools “could be useful for remote medical settings where there’s a need for surgical tools but it’s difficult to deliver new tools as they break, or where there’s a need for customized tools. And with the antimicrobial properties, if the sterility of the operating room is not ideal the antimicrobial function could be essential,” he says.
Because most existing extrusion-based 3-D printers rely on heating polymer to make it flow, their production speed is limited by the amount of heat that can be delivered to the polymer without damaging it. This room-temperature cellulose process, which simply relies on evaporation of the acetone to solidify the part, could potentially be faster, Pattinson says. And various methods could speed it up even further, such as laying down thin ribbons of material to maximize surface area, or blowing hot air over it to speed evaporation. A production system would also seek to recover the evaporated acetone to make the process more cost effective and environmentally friendly.
Cellulose acetate is already widely available as a commodity product. In bulk, the material is comparable in price to that of thermoplastics used for injection molding, and it’s much less expensive than the typical filament materials used for 3-D printing, the researchers say. This, combined with the room-temperature conditions of the process and the ability to functionalize cellulose in a variety of ways, could make it commercially attractive.
Learn more: 3-D printing with cellulose
Receive an email update when we add a new ADDITIVE MANUFACTURING article.
The Latest on: Additive manufacturing
via Google News
The Latest on: Additive manufacturing
Global Metrology Services Market 2019-2023 | Emerging Applications of Metrology Services in Additive Manufacturing to Boost Growth | Technavio
on May 17, 2019 at 8:40 am
The global metrology services market is expected to post a CAGR close to 7% during the period 2019-2023, according to the latest market research report by Technavio. This press release features ... […]
MHI Machine Tool to Showcase State-of-the-Art Metal 3D Additive Manufacturing Technology at U.S. Trade Fair
on May 16, 2019 at 5:45 am
Mitsubishi Heavy Industries Machine Tool Co., Ltd., a group company of Mitsubishi Heavy Industries, Ltd. (MHI)(TOKYO:7011) based in Ritto, Shiga Prefecture, is set to begin overseas marketing of its ... […]
DSM and Origin Announce Partnership to Enable New Materials for Origin’s Open Additive Manufacturing Platform
on May 16, 2019 at 3:05 am
Geleen, The Netherlands / San Francisco, Calif. – Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced it is entering in a partnership with Origin, ... […]
RIA-JMTC Additive Manufacturing Center of Excellence marks initial operating capability with ribbon cutting
on May 15, 2019 at 12:46 pm
ROCK ISLAND ARSENAL, Ill. – A ribbon cutting ceremony for the Rock Island Arsenal – Joint Manufacturing and Technology Center (RIA-JMTC), Center of Excellence for Advanced and Additive Manufacturing ... […]
Wabtec invests in additive manufacturing tech
on May 15, 2019 at 10:06 am
On Wednesday, the company announced a strategic move in that direction with an investment in General Electric Additive’s H2 binder jet printer capabilities. Wabtec and GE Transportation merged in ... […]
Carpenter Technology’s New Additive Manufacturing (AM) Business Unit Offers Full spectrum of AM Products and Services
on May 14, 2019 at 9:59 pm
PHILADELPHIA, May 14, 2019 (GLOBE NEWSWIRE) -- Carpenter Technology Corporation (CRS) announced today the formation of its Carpenter Additive business unit. Carpenter Technology has taken ... […]
The 3 Breakthroughs Additive Manufacturing Needs Most
on May 14, 2019 at 9:29 am
When the concept of additive manufacturing (AM) first entered the public sphere nearly 40 years ago, its applications were mainly focused on fabricating small, complex items with plastic polymers. In ... […]
Additive Manufacturing (AM) with Nickel Alloys, 2019 - In 2018, Revenues from Nickel Alloys Grew Faster Than Steels, Titanium, and Cobalt Materials
on May 14, 2019 at 3:14 am
Dublin, May 14, 2019 (GLOBE NEWSWIRE) -- The "Additive Manufacturing with Nickel Alloys 2019" report has been added to ResearchAndMarkets.com's offering. Over the past quarter, the analyst has been ... […]
Making Additive Manufacturing a True Production Technology
on May 13, 2019 at 6:08 am
The use of additive manufacturing as a rapid prototyping technology has become universally accepted across all key industrial sectors, allowing design engineers and manufacturers the ability to assess ... […]
via Bing News