In the future, a new type of tiny redox flow battery will supply tightly packed electronic components with energy, while also dissipating the heat they produce.
Researchers at ETH Zurich and IBM Research Zurich have built a tiny redox flow battery. This means that future computer chip stacks – in which individual chips are stacked like pancakes to save space and energy – could be supplied with electrical power and cooled at the same time by such integrated flow batteries. In a flow battery, an electrochemical reaction is used to produce electricity out of two liquid electrolytes, which are pumped to the battery cell from outside via a closed electrolyte loop.
“The chips are effectively operated with a liquid fuel and produce their own electricity,” says Dimos Poulikakos, Professor of Thermodynamics at ETH Zurich. As the scientists use two liquids that are known to be suitable both as flow-battery electrolytes and as a medium to also effect cooling, excess heat can also be dissipated from the chip stack via the same circuit.
The battery built by the scientists is only around 1.5 millimetres thick. The idea would be to assemble chip stacks layer by layer: a computer chip, then a thin battery micro-cell that supplies the chip with electricity and cools it, followed by the next computer chip and so on.
Previous flow batteries (see box) are usually large scale and used mainly in stationary energy storage applications, for instance in combination with wind farms and solar power plants, where they temporarily store the energy produced there so it can be used at a later time. “We are the first scientists to build such a small flow battery so as to combine energy supply and cooling,” says Julian Marschewski, a doctoral student in Poulikakos’ group.
The output of the new micro-battery also reaches a record-high in terms of its size: 1.4 watts per square centimetre of battery surface. Even if you subtract the power required to pump the liquid electrolytes to the battery, the resulting net power density is still 1 watt per square centimetre.
As the researchers were able to show in an experiment, the electrolyte liquids are actually able to cool a chip. They are even able to dissipate heat amounts many times over what the battery generates as electrical energy (which is converted into heat while the chip is in operation).
Channel system optimised with 3D printing
According to the scientists, the most serious challenge in constructing the new micro-flow batteries was to build them in such a way that they are supplied with electrolytes as efficiently as possible while at the same time keeping the pumping power as low as possible. “It was important to find the ideal compromise,” says Marschewski.
The electrochemical reactions in the battery occur in two thin and porous electrode layers that are separated by a membrane. Marschewski and his colleagues used 3D-printing technology to build a polymer channel system to press the electrolyte liquid into the porous electrode layer as efficiently as possible. The most suitable of the various designs tested proved to be one made of wedge-shaped convergent channels.
Interesting for large systems, too
The scientists have now provided an initial proof-of-concept for the construction of a small flow battery. Although the power density of the new micro-flow battery is very high, the electricity produced is still not entirely sufficient to operate a computer chip. In order for the flow battery to be used in a chip stack, it must be further optimised by industry partners.
As the scientists point out, the new approach is also interesting for other applications: in lasers, for example, which have to be supplied with energy and cooled; or for solar cells, where the electricity produced could be stored directly in the battery cell and used later when needed. The system could also keep the operating temperature of the solar cell at the ideal level. In addition, large flow batteries could also be improved with the optimised approach of forcing the electrolyte liquids through the porous electrodes.
Learn more: Liquid fuel for future computers
Receive an email update when we add a new REDOX FLOW BATTERY article.
The Latest on: Redox flow battery
via Google News
The Latest on: Redox flow battery
- There’s something fishy about this flow battery innovationon July 7, 2020 at 2:50 am
Redox flow batteries are among the competing battery chemistries which have already seen commercial uptake. Like many rival solutions, flow batteries typically feature a carbon electrode ...
- Vanadium Redox Flow Battery (VRB) Marketon July 6, 2020 at 6:57 am
Industry Overview of the Vanadium Redox Flow Battery (VRB) Market Report 2020-2027: Reports and Data has added a new report of the Global Vanadium Redox Flow Battery (VRB) Market, which is inclusive ...
- Global Redox Flow Battery Market 2020 Key Business Strategies, Technology Innovation and Regional Data Analysis to 2026on July 1, 2020 at 12:41 pm
Jul 01, 2020 (CDN Newswire via Comtex) -- Global Redox Flow Battery Market 2020 by Manufacturers, Regions, Type and Application, Forecast to 2026 provides exhaustive data that comprise the market ...
- Shrimp shells to produce electrodes for large storage batterieson July 1, 2020 at 6:03 am
A project by Spanish researchers and other collaborators at the Massachusetts Institute of Technology (MIT) suggests the use of chitin from shrimp shells to produce electrodes for vanadium flow ...
- Shrimp shells offer a green ingredient for large-scale flow batterieson June 30, 2020 at 11:18 pm
Lithium-ion batteries power much of the modern world, but when it comes to renewable energy, scientists see great potential in an emerging alternative known as redox flow batteries. Researchers have ...
- Vanadium Miners News For The Month Of June 2020on June 29, 2020 at 1:02 am
Vanadium spot prices were higher in June. Vanadium market news - U.S. opens national security probe into vanadium imports. The flow battery market is projected ...
- Energy Storage Vanadium Redox Battery Market Overview, Industry Top Manufactures, Market Size, Industry Growth Analysis & Forecast: 2026on June 21, 2020 at 11:01 pm
The vanadium redox battery (VRB) (or Vanadium flow battery) is a type of rechargeable flow battery that employs vanadium ions in different oxidation states to store chemical potential energy.
- flow batteryon June 19, 2020 at 5:00 pm
Researchers in Singapore have created a new kind of redox flow battery with an energy density around ten times higher than conventional redox flow batteries. Never heard of a redox flow battery?
via Bing News