ETH material scientists have developed a new method of manufacturing ceramics that does not require the starting materials to be fired. Instead, they are compacted under high pressure at room temperature in a significantly more energy-efficient process.
The manufacture of cement, bricks, bathroom tiles and porcelain crockery normally requires a great deal of heat: a kiln is used to fire the ceramic materials at temperatures well in excess of 1,000°C. Now, material scientists from ETH Zurich have developed what seems at first glance to be an astonishingly simple method of manufacture that works at room temperature. The scientists used a calcium carbonate nanopowder as the starting material and instead of firing it, they added a small amount of water and then compacted it.
“The manufacturing process is based on the geological process of rock formation,” explains Florian Bouville, a postdoc in the group of André Studart, Professor of Complex Materials. Sedimentary rock is formed from sediment that is compressed over millions of years through the pressure exerted by overlying deposits. This process turns calcium carbonate sediment into limestone with the help of the surrounding water. As the ETH researchers used calcium carbonate with an extremely fine particle size (nanoparticles) as the starting material, their compacting process took only an hour. “Our work is the first evidence that a piece of ceramic material can be manufactured at room temperature in such a short amount of time and with relatively low pressures,” says ETH professor Studart.
Stronger than concrete
As tests have shown, the new material can withstand about ten times as much force as concrete before it breaks, and is as stiff as stone or concrete. In other words, it is just as hard to deform.
So far, the scientists have produced material samples of about the size of a one-franc piece using a conventional hydraulic press such as those normally used in industry. “The challenge is to generate a sufficiently high pressure for the compacting process. Larger workpieces require a correspondingly greater force,” says Bouville. According to the scientists, ceramic pieces the size of small bathroom tiles should theoretically be feasible.
Energy-efficient and environmentally benign
“For a long time, material scientists have been searching for a way to produce ceramic materials under mild conditions, as the firing process requires a large amount of energy,” says Studart. The new room-temperature method – which experts refer to as cold sintering – is much more energy-efficient and also enables the production of composite materials containing, for example, plastic.
The technique is also of interest with a view to a future CO2-neutral society. Specifically, the carbonate nanoparticles could conceivably be produced using CO2 captured from the atmosphere or from waste gases from thermal power stations. In this scenario, the captured CO2 is allowed to react with a suitable rock in powder form to produce carbonate, which could then be used to manufacture ceramics at room temperature. The climate-damaging CO2 would thus be stored in ceramic products in the long term. These would constitute a CO2 sink and could help thermal power stations to operate on a carbon-neutral basis.
According to the scientists, in the long term, the new approach of cold sintering even has the potential to lead to more environmentally friendly substitutes for cement-based materials. However, great research efforts are needed to reach this goal. Cement production is not only energy-intensive, but it also generates large amounts of CO2 – unlike potential cold-sintered replacement materials.
Learn more: Sustainable ceramics without a kiln
Receive an email update when we add a new SUSTAINABLE CERAMICS article.
The Latest on: Sustainable ceramics
via Google News
The Latest on: Sustainable ceramics
- India- Ceramic Membrane Market by 2027 Trending Report with its Key Vendor Analysis and Revenueon August 16, 2019 at 8:24 pm
promotes sustainable expansion and savings of natural resources and the climate. The low cost stable ceramic membrane production from industrial wastes or available low cost materials will ...
- Ceramic Membrane Market by 2027 Trending Report with its Key Vendor Analysis and Revenueon August 16, 2019 at 6:30 pm
The waste can be converted into a source which contributes to investment in raw materials, promotes sustainable expansion and savings of natural resources and the climate. The low cost stable ceramic ...
- A new definition of composites?on August 16, 2019 at 7:35 am
In looking at their press release and website, both of which focused on recycling and transforming plastic waste into sustainable, improved-performance ... recognized it from my recent research into ...
- Flats Festival of the Artson August 14, 2019 at 10:18 am
From ceramics to woodwork, photography and painting ... whose mission is to create places and connect people through public art, sustainable building and design, collaborative planning, and dynamic ...
- Is It Smart To Buy Kajaria Ceramics Limited (NSE:KAJARIACER) Before It Goes Ex-Dividend?on August 12, 2019 at 5:09 pm
It's positive to see that Kajaria Ceramics's dividend is covered by both profits and cash flow, since this is generally a sign that the dividend is sustainable, and a lower payout ratio usually ...
- Two Bordentown City businesses recognized for sustainable practiceson August 12, 2019 at 4:26 am
When dining in, patrons are served meals on ceramic, glass and other reusable materials ... and effort required to transition a business model and culture toward a more sustainable approach, and they ...
- East Fork Pottery Just Released a Dinnerware Collection That Will Put You in a Good Mood (but Really!)on August 8, 2019 at 1:31 pm
The Asheville, North Carolina–based ceramics company—which has a cult following ... For the Pollen launch, East Fork partnered with sustainable spice company Diaspora Co. to offer a jar of ...
- China Ceramics Announces Innovative Ceramic Tiles for Cooling Building Interiorson August 8, 2019 at 6:28 am
"We believe that the new cooling ceramic tiles are an important milestone as it serves as a means to save on air conditioning energy costs in a sustainable way," said Ms. Meishuang Huang, Chief ...
- This Designer is Making Ceramic Wares With Human Urineon May 31, 2019 at 12:43 am
When glazed ceramics are used as utensils, they can potentially leach into food and drinks and cause metal poisoning. Now, a designer is exploring more sustainable options for ceramic glazing. Sinae ...
via Bing News