Some day, your smartphone might completely conform to your wrist, and when it does, it might be covered in pure gold, thanks to researchers at Missouri S&T.
Writing in the March 17 issue of the journal Science, the S&T researchers say they have developed a way to “grow” thin layers of gold on single crystal wafers of silicon, remove the gold foils, and use them as substrates on which to grow other electronic materials. The research team’s discovery could revolutionize wearable or “flexible” technology research, greatly improving the versatility of such electronics in the future.
According to lead researcher Jay A. Switzer, the majority of research into wearable technology has been done using polymer substrates, or substrates made up of multiple crystals. “And then they put some typically organic semiconductor on there that ends up being flexible, but you lose the order that (silicon) has,” says Switzer, Donald L. Castleman/FCR Endowed Professor of Discovery in Chemistry at S&T.
Because the polymer substrates are made up of multiple crystals, they have what are called grain boundaries, says Switzer. These grain boundaries can greatly limit the performance of an electronic device.
“Say you’re making a solar cell or an LED,” he says. “In a semiconductor, you have electrons and you have holes, which are the opposite of electrons. They can combine at grain boundaries and give off heat. And then you end up losing the light that you get out of an LED, or the current or voltage that you might get out of a solar cell.”
Most electronics on the market are made of silicon because it’s “relatively cheap, but also highly ordered,” Switzer says.
“99.99 percent of electronics are made out of silicon, and there’s a reason – it works great,” he says. “It’s a single crystal, and the atoms are perfectly aligned. But, when you have a single crystal like that, typically, it’s not flexible.”
By starting with single crystal silicon and growing gold foils on it, Switzer is able to keep the high order of silicon on the foil. But because the foil is gold, it’s also highly durable and flexible.
“We bent it 4,000 times, and basically the resistance didn’t change,” he says.
The gold foils are also essentially transparent because they are so thin. According to Switzer, his team has peeled foils as thin as seven nanometers.
Switzer says the challenge his research team faced was not in growing gold on the single crystal silicon, but getting it to peel off as such a thin layer of foil. Gold typically bonds very well to silicon.
“So we came up with this trick where we could photo-electrochemically oxidize the silicon,” Switzer says. “And the gold just slides off.”
Photoelectrochemical oxidation is the process by which light enables a semiconductor material, in this case silicon, to promote a catalytic oxidation reaction.
Switzer says thousands of gold foils—or foils of any number of other metals—can be made from a single crystal wafer of silicon.
The research team’s discovery can be considered a “happy accident.” Switzer says they were looking for a cheap way to make single crystals when they discovered this process.
“This is something that I think a lot of people who are interested in working with highly ordered materials like single crystals would appreciate making really easily,” he says. “Besides making flexible devices, it’s just going to open up a field for anybody who wants to work with single crystals.”
Receive an email update when we add a new ARTIFICIAL SYNAPSES article.
The Latest on: Wearable electronics
via Google News
The Latest on: Wearable electronics
- Hydrophobic and Stable MXene–Polymer Pressure Sensors for Wearable Electronicson March 22, 2020 at 11:38 pm
Department of Materials Science and Engineering, A. J. Drexel Nanomaterials Institute, Drexel University, 3141 Chestnut Street, Philadelphia, Pennsylvania 19104, United States Sino-Russian ...
- WPI-MANA Finds 'Liquid Electret' Could Offer New Power Source for Wearable Electronicson March 22, 2020 at 11:38 pm
TSUKUBA, Japan, March, 23, 2020 /PRNewswire/ -- Researchers at the International Center for Materials Nanoarchitectonics (WPI-MANA), a unit of the National Institute for Materials Science (NIMS), have ...
- A wearable freestanding electrochemical sensing systemon March 20, 2020 at 12:14 pm
The FESS serves as a foundation to realize a system-level design strategy, addressing the challenges of wearable biosensing, in the presence of motion, and integration with consumer electronics. To ...
- Wearable Medical Device Market Industry Chain Analysis, Upstream Raw Material Suppliers, Major Players 2020-2025on March 20, 2020 at 1:20 am
Research report on “Wearable Medical Device Market” offers the breakdown of the business by market Size, growth rate, key companies, regions, product types and applications. The Wearable Medical ...
- Funding roundup: Element Science raises $145.6M for wearable defibrillatorson March 19, 2020 at 5:32 pm
Rowe Price. One of a slew of electronics companies offering sleep-tracking as a feature, Oura is unique in that its wearable rings are solely focused on sleep. The company said it has sold 150,000 ...
- Engineers develop supercapacitor to power wearable electronicson March 19, 2020 at 3:46 pm
Duke University and Michigan State researchers said Thursday they have engineered a new type of supercapacitor for wearable electronics that remains functional after being stretched eight times its ...
- Stretchable supercapacitors to power tomorrow's wearable deviceson March 19, 2020 at 12:13 pm
The researchers envision the supercapacitor being part of a power-independent, stretchable, flexible electronic system for applications such as wearable electronics or biomedical devices. Researchers ...
- Wearable Electronics Market Growth Factors and Key Players: Adidas AG, Recon Instruments, Fibretronic, Jawbone, Fitbit, Nikeon March 19, 2020 at 12:11 am
The Wearable Electronics Market is growing at a faster pace with substantial growth rates over the last few years and is estimated that the market will grow significantly in the forecasted period i.e.
- Fish scales could make wearable electronics more sustainableon March 18, 2020 at 5:25 am
In tests, they found the film had the attributes, including flexibility and transparency, needed for use in wearable devices. The film also appeared unlikely to ... Films derived from fish scales are ...
via Bing News