When Geoffrey Coates, a professor of chemistry and chemical biology at Cornell University, gives a talk about plastics and recycling, he usually opens with this question: What percentage of the 78 million tons of plastic used for packaging – for example, a 2-liter bottle or a take-out food container – actually gets recycled and re-used in a similar way?
The answer, just 2 percent. Sadly, nearly a third is leaked into the environment, around 14 percent is used in incineration and/or energy recovery, and a whopping 40 percent winds up in landfills.
One of the problems: Polyethylene (PE) and polypropylene (PP), which account for two-thirds of the world’s plastics, have different chemical structures and thus cannot be repurposed together. Or, at least, an efficient technology to meld these two materials into one hasn’t been available in the 60 years they’ve both been on the market.
That could change with a discovery out of Coates’ lab. He and his group have collaborated with a group from the University of Minnesota to develop a multiblock polymer that, when added in small measure to a mix of the two otherwise incompatible materials, create a new and mechanically tough polymer.
The two groups’ work is detailed in a paper, “Combining polyethylene and polypropylene: Enhanced performance with PE/iPP multiblock polymers,” published online Feb. 23 in Science.
James Eagan, a postdoctoral researcher in Coates’ group, is lead author of the paper. Other collaborators included researcher Anne LaPointe and former visiting scientist Rocco DiGirolamo.
Scientists for years have tried to develop a polymer that does what Coates, LaPointe and Eagan have achieved. By adding a miniscule amount of their tetrablock (four-block) polymer – with alternating polyethylene and polypropylene segments – the resultant material has strength superior to diblock (two-block) polymers they tested.
In their test, two strips of plastic were welded together using different multi-block polymers as adhesives, then mechanically pulled apart. While the welds made with diblock polymers failed relatively quickly, the weld made of the group’s tetrablock additive held so well that the plastic strips broke instead.
“People have done things like this before,” Coates said, “but they’ll typically put 10 percent of a soft material, so you don’t get the nice plastic properties, you get something that’s not quite as good as the original material.”
“What’s exciting about this,” he said, “is we can go to as low as 1 percent of our additive, and you get a plastic alloy that really has super-great properties.”
Not only does this tetrablock polymer show promise for improving recycling, Eagan said, it could spawn a whole new class of mechanically tough polymer blends.
“If you could make a milk jug with 30 percent less material because it’s mechanically better, think of the sustainability of that,” he said. “You’re using less plastic, less oil, you have less stuff to recycle, you have a lighter product that uses less fossil fuel to move it.”
Receive an email update when we add a new PLASTICS RECYCLING article.
The Latest on: Plastics recycling
via Google News
The Latest on: Plastics recycling
- Plastic Recyclers Group Launches Post-Consumer Resin Certification Programon April 3, 2020 at 9:19 am
The Association of Plastic Recyclers (APR), an international trade association that represents the plastics recycling industry, introduced a post-consumer resin certification program. This effort is ...
- COVID-19 Underscores The Need To Invest In Local Waste Management And Recycling To Combat Ocean Plasticon April 3, 2020 at 5:04 am
COVID-19 only underscores our need on a global scale to galvanize investor capital to double down on investments that turn plastic waste from an economic and environmental cost into a resource.
- Global Rigid Recycled Plastics Market 2020-2024 | Growth of the Recycling Industry to Boost Market Growth | Technavioon April 1, 2020 at 1:00 pm
Rigid Recycled Plastics Market: Growing Need for Sustainability Plastic recycling makes an immense contribution to environmental sustainability through intrinsic recyclability and energy recovery ...
- S&P Global Platts to Assess Prices for US Plastic (PET) Bottle Recyclingon April 1, 2020 at 7:54 am
S&P; Global Platts, the leading independent provider of information and benchmark prices for the commodities and energy markets, today announced the launch of three new daily spot price assessments ...
- When Does Recycling Your Plastic Make Sense? The Answer Isn’t So Simpleon March 31, 2020 at 1:51 pm
When you throw away a plastic container, how do you decide whether to toss it in the trash or into a recycling bin? If you find the choice puzzling, you’re not alone. A 2014 poll found that 65 percent ...
- Plastic Wars: Three Takeaways From The Fight Over The Future Of Plasticson March 31, 2020 at 5:00 am
Plastics industry had "serious doubt" recycling would ever be viable Starting in the late 1980s, the plastics industry spent tens of millions of dollars promoting recycling through ads, recycling ...
- Byzen Digital Announces LOI with Clean-Seas to Create World’s Leading Plastic Recycling Companyon March 27, 2020 at 11:05 am
New Waste to Energy Technologies Improve Process and Efficiency London, UK, March 27, 2020 (GLOBE NEWSWIRE) -- via NEWMEDIAWIRE -- Byzen ...
- New Polymers that Close the Loop in Plastics Recyclingon March 27, 2020 at 6:35 am
Scientists have designed a recyclable plastic called poly(diketoenamine)s, or PDKs. Like a Lego playset, manufacturers can disassemble it into its fundamental parts at the molecular level. All ...
- Plastics Recycling Looks Promising to Enterprise Blockchain Startupson March 26, 2020 at 10:00 pm
But this time, it’s for plastics recycling. Blockchains are proving extremely useful for tracking materials across all sorts of supply chains and creating transparent and immutable audit trails.
via Bing News