After demonstrating the first acoustically driven tractor beam platform, researchers develop a simpler, cheaper version using 3-D printable parts and open-source electronic components for the maker community
Last year Asier Marzo, then a doctoral student at the Public University of Navarre, helped develop the first single-sided acoustic tractor beam — that is, the first realization of trapping and pulling an object using sound waves from only one direction. Now a research assistant at the University of Bristol, Marzo has lead a team that adapted the technology to be, for all intents and purposes, 3-D printable by anyone (with some assembly required, of course).
In addition to a fully detailed how-to video that the group produced for the public, the results of the work developing this do-it-yourself, handheld acoustic tractor beam will appear this week as an open access paper in Applied Physics Letters, from AIP Publishing.
Sonic levitation is not new, and the use of sound waves to push around macroscopic objects, or create patterns in resting sand and flowing water, is scattered throughout YouTube and has been for years. This technology, however, is not simply sonic levitation, using sound to push objects around.
Based on similar fundamental physics used for decades to create optical traps, these tractor beams are true to their name in that they pull objects, trapping small beads — and even insects — at their foci.
“The most important thing is that it can attract the particle towards the source,” said Marzo. “It’s very easy to push particles from the source, but what’s hard is to pull them toward the source; to attract the particles. When you move the tractor beam, the particle moves, but otherwise the trap is static. It can levitate small plastics; it can also levitate a fly and small biological samples. It’s quite handy.”
The first versions of the device that proved the concept possible were not much larger than these new, 3-D printable versions. However, their underlying technology was more complex and required expensive electronics.
Much of the expense arose from the array of active components that electronically shaped sound waves, manipulating how and where they interfere to create the resulting object-trapping environment just above the array.
“Previously we developed a tractor beam, but it was very complicated and pricey because it required a phase array, which is a complex electronic system,” Marzo said. “In this paper, we made a simple, static tractor beam that only requires a static piece of matter.”
The simplicity (and affordability) of this passive, static-matter approach comes from the special architecture of that matter, designed to replace the phase array components and to shape sound waves structurally instead of electronically. As the sound, which now can be generated from a single source, passes through these carefully designed elements, the waves are shaped by the internal structure of the 3-D printed material.
“We can modulate a simple wave using what’s called a metamaterial which is basically a piece of matter with lots of tubes of different lengths. The sound passes through these tubes and when it exits the metamaterial, it has the correct phases to create a tractor beam,” said Marzo.
With an effect that is primarily determined by the shape of the tubes, the research team focused on optimizing the design to allow fabrication with common 3-D printers, ensuring it could be constructed even by at-home hobbyists.
According to Marzo, this was primarily a challenge in resolution, requiring a design that would not suffer from the limited precision of lower-end 3-D printer nozzles. “We needed to engineer the tubes very well to allow them to be 3-D printed with a normal 3-D printer. A normal 3-D printer has a lot of limitations,” he said.
With those limitations overcome, the group developed the rest of the tractor beam system using easily accessible components, such as from the popular open-source electronics supplier, Arduino. They even produced a detailed how-to video for its construction, a link to which is included below. “There will be a set of instructions with a list of the needed components and a step-by-step video. The components are very simple, like an Arduino and a motor driver, and everything can be bought on Amazon for less than £50 (about $70),” Marzo said.
Besides seriously impressing dinner guests, these DIY tractor beams have many potential uses and may even become a new tool for studying low-gravity effects on biological samples. Marzo pointed out this type of “micro-gravity” research is already of interest and encouraged biologists to find their own applications for the device.
“Recently there have been several papers about what happens if we levitate an embryo, how does it develop? Or what happens if we levitate bacteria?” he said. “For instance, they discovered salmonella is three times more [virulent] when it’s levitated. Certain microorganisms react differently to microgravity.”
There are three designs of the device, each with trapping profiles suitable for different object sizes relative to the wavelength of sound used. However, even for the full lab implementation where the group traps heavier objects and even liquids, trapping objects larger than half the wavelength of sound still poses a challenge. For practical frequencies, just above what humans can hear, this limits the size of trappable objects to a few millimeters.
As Marzo and his group work to overcome this challenge and continue to improve the capabilities of their tractor beams, the democratization of their technology paves the way for untold uses and tweaks from the maker community. So, the question really is — what would you do with your own tractor beam?
Learn more: How to 3-D Print Your Own Sonic Tractor Beam
Receive an email update when we add a new TRACTOR BEAM article.
The Latest on: Tractor beam
via Google News
The Latest on: Tractor beam
- Beaming up at the Christiana Mallon June 22, 2020 at 2:15 pm
The placement of steel beams atop concrete piers straddling Route 1 at the Christiana Mall will result in the overnight closure of that roadway during overnight hours this week.
- Father’s Day reflection: Dad’s wallet was a pocket portfolio of a life lived honorably and dutifullyon June 19, 2020 at 10:41 am
Going through Dad’s wallet a couple years after his death was sure to carry me back. How far, I had no idea until I dove in.
- SnowEx introduces Automatixx attachment kits for tractorson June 17, 2020 at 9:10 am
Automatixx attachment kits from SnowEx are now available for a variety of OEM tractor models. The offering allows direct attachment of SnowEx straight blades, V-plows or winged plows to tractors. The ...
- Making images with soundon June 16, 2020 at 4:54 am
Floating visual displays created using acoustically levitated particles could lead to galleries of singing heads. Michael Allen investigates ...
- At the Start of World War II Imperial Japan Was on a Rollon June 12, 2020 at 3:44 pm
Control of the malarial, jungle-clad island and its airfield might determine the fate of the war in the Pacific. The problem was that neither the Japanese nor the Americans had the resources. Both ...
- Tag: tractor beamon June 10, 2020 at 5:00 pm
Hypertext is one of South Africa’s leading technology news and reviews sites, catering for consumers, small and medium businesses and the technology channel. We publish original content daily ...
- Acoustic Levitation With A Twiston June 10, 2020 at 5:00 pm
Don’t blame us for the click-baity titles in the source articles about this handheld “acoustic tractor beam”. You can see why the popular press tarted this one up a bit, even at the risk of ...
- Working Tractor Beam Can Move Objects 5 Feet With Just Lighton June 9, 2020 at 6:30 am
Not quite a simple grabby tractor beam, the new system works by shining a hollow laser beam at an object and taking advantage of air-temperature differences to move it around. Advertisement ...
- Physicists Make Real-Life Tractor Beam From Plain Ol' Wateron June 8, 2020 at 5:00 pm
It's a real-life tractor beam. First off, I know what you're thinking, and no, this is not the same thing as a rip current or undertow. Those are actually two different phenomena, but neither is ...
via Bing News