By suspending tiny metal nanoparticles in liquids, paper-based printable electronics scientists are brewing up conductive ink-jet printer “inks” to print inexpensive, customizable circuit patterns on just about any surface.
Printed electronics, which are already being used on a wide scale in devices such as the anti-theft radio frequency identification (RFID) tags you might find on the back of new DVDs, currently have one major drawback: for the circuits to work, they first have to be heated to melt all the nanoparticles together into a single conductive wire, making it impossible to print circuits on inexpensive plastics or paper.
A new study by Duke researchers shows that tweaking the shape of the nanoparticles in the ink might just eliminate the need for heat.
By comparing the conductivity of films made from different shapes of silver nanostructures, the researchers found that electrons zip through films made of silver nanowires much easier than films made from other shapes, like nanospheres or microflakes. In fact, electrons flowed so easily through the nanowire films that they could function in printed circuits without the need to melt them all together.
“The nanowires had a 4,000 times higher conductivity than the more commonly used silver nanoparticles that you would find in printed antennas for RFID tags,” said Benjamin Wiley, assistant professor of chemistry at Duke. “So if you use nanowires, then you don’t have to heat the printed circuits up to such high temperature and you can use cheaper plastics or paper.”
“There is really nothing else I can think of besides these silver nanowires that you can just print and it’s simply conductive, without any post-processing,” Wiley added.
These types of printed electronics could have applications far beyond smart packaging; researchers envision using the technology to make solar cells, printed displays, LEDS, touchscreens, amplifiers, batteries and even some implantable bio-electronic devices. The results appeared online Dec. 16 in ACS Applied Materials and Interfaces.
Silver has become a go-to material for making printed electronics, Wiley said, and a number of studies have recently appeared measuring the conductivity of films with different shapes of silver nanostructures. However, experimental variations make direct comparisons between the shapes difficult, and few reports have linked the conductivity of the films to the total mass of silver used, an important factor when working with a costly material.
“We wanted to eliminate any extra materials from the inks and simply hone in on the amount of silver in the films and the contacts between the nanostructures as the only source of variability,” said Ian Stewart, a recent graduate student in Wiley’s lab and first author on the ACS paper.
Stewart used known recipes to cook up silver nanostructures with different shapes, including nanoparticles, microflakes, and short and long nanowires, and mixed these nanostructures with distilled water to make simple “inks.” He then invented a quick and easy way to make thin films using equipment available in just about any lab — glass slides and double-sided tape.
“We used a hole punch to cut out wells from double-sided tape and stuck these to glass slides,” Stewart said. By adding a precise volume of ink into each tape “well” and then heating the wells — either to relatively low temperature to simply evaporate the water or to higher temperatures to begin melting the structures together — he created a variety of films to test.
The team say they weren’t surprised that the long nanowire films had the highest conductivity. Electrons usually flow easily through individual nanostructures but get stuck when they have to jump from one structure to the next, Wiley explained, and long nanowires greatly reduce the number of times the electrons have to make this “jump”.
But they were surprised at just how drastic the change was. “The resistivity of the long silver nanowire films is several orders of magnitude lower than silver nanoparticles and only 10 times greater than pure silver,” Stewart said.
The team is now experimenting with using aerosol jets to print silver nanowire inks in usable circuits. Wiley says they also want to explore whether silver-coated copper nanowires, which are significantly cheaper to produce than pure silver nanowires, will give the same effect.
Receive an email update when we add a new PRINTABLE ELECTRONIC DEVICES article.
The Latest on: Printable electronic devices
via Google News
The Latest on: Printable electronic devices
- One thing to buy this week: Greyson Stinger poloon July 2, 2020 at 1:02 pm
If you’re looking for a cool and unique shirt for your next round, GOLF's Pro Shop has you covered. This week, we're loving this top from Greyson Clothiers.
- Engineers 3D-print sensors onto moving organson July 2, 2020 at 1:32 am
A new technique developed by University of Minnesota researchers allows 3D printing of hydrogel-based sensors directly on the surface of organs, such as lungs—even as they expand and contract ( ...
- Scientific benefits of reading printed bookson June 30, 2020 at 5:00 pm
In recent years, print books have seen a resurgence, and for good reason—they can be better for your brain and health, according to science. Here are just a few of the reasons why:1. YOU ABSORB MORE ...
- CHARLIE SEWELL: Make sure what you're reading is realon June 24, 2020 at 10:00 pm
Some people use the internet for their primary source of information, and they’ve lost their skills at turning the pages on books, encyclopedias, newspapers and dictionaries. The internet is great, ...
- Blind MSU students get new learning toolon June 16, 2020 at 4:06 pm
The university will be handing out electronic braille displays to all incoming blind students. The device connects to a ... until now the university had to print special documents for students ...
- Why Poetry Books Often Aren't Accessible to People With Disabilitieson June 16, 2020 at 12:00 pm
I love to read outdoors, but if I take a print book outside, I have to wrestle against the wind to keep my page. Last summer I tried to read poolside a book that isn’t available in electronic ...
- NASA Spinoff Prints Electronicson June 12, 2020 at 5:00 pm
NASA says that Electronic Alchemy’s eForge ... we’d expect an amorphous solar cell might be printable, but we’d expect active devices to usually require a crystalline structure.
- Smart Fridge Security Has An Expiry Date Tooon June 10, 2020 at 10:30 am
They took a look at the fine print that came with a variety of smart ... webcams and other IoT devices. The inevitable vulnerabilities that exist on smart fridges and other appliances can ...
- Anti-counterfeiting campaignon June 9, 2020 at 1:00 pm
Whether it's knockoff electronic devices with faulty batteries that catch fire or foods ... Social media and online advertising Interactive web content Radio ads Handouts, posters, and other print ...
via Bing News