By suspending tiny metal nanoparticles in liquids, paper-based printable electronics scientists are brewing up conductive ink-jet printer “inks” to print inexpensive, customizable circuit patterns on just about any surface.
Printed electronics, which are already being used on a wide scale in devices such as the anti-theft radio frequency identification (RFID) tags you might find on the back of new DVDs, currently have one major drawback: for the circuits to work, they first have to be heated to melt all the nanoparticles together into a single conductive wire, making it impossible to print circuits on inexpensive plastics or paper.
A new study by Duke researchers shows that tweaking the shape of the nanoparticles in the ink might just eliminate the need for heat.
By comparing the conductivity of films made from different shapes of silver nanostructures, the researchers found that electrons zip through films made of silver nanowires much easier than films made from other shapes, like nanospheres or microflakes. In fact, electrons flowed so easily through the nanowire films that they could function in printed circuits without the need to melt them all together.
“The nanowires had a 4,000 times higher conductivity than the more commonly used silver nanoparticles that you would find in printed antennas for RFID tags,” said Benjamin Wiley, assistant professor of chemistry at Duke. “So if you use nanowires, then you don’t have to heat the printed circuits up to such high temperature and you can use cheaper plastics or paper.”
“There is really nothing else I can think of besides these silver nanowires that you can just print and it’s simply conductive, without any post-processing,” Wiley added.
These types of printed electronics could have applications far beyond smart packaging; researchers envision using the technology to make solar cells, printed displays, LEDS, touchscreens, amplifiers, batteries and even some implantable bio-electronic devices. The results appeared online Dec. 16 in ACS Applied Materials and Interfaces.
Silver has become a go-to material for making printed electronics, Wiley said, and a number of studies have recently appeared measuring the conductivity of films with different shapes of silver nanostructures. However, experimental variations make direct comparisons between the shapes difficult, and few reports have linked the conductivity of the films to the total mass of silver used, an important factor when working with a costly material.
“We wanted to eliminate any extra materials from the inks and simply hone in on the amount of silver in the films and the contacts between the nanostructures as the only source of variability,” said Ian Stewart, a recent graduate student in Wiley’s lab and first author on the ACS paper.
Stewart used known recipes to cook up silver nanostructures with different shapes, including nanoparticles, microflakes, and short and long nanowires, and mixed these nanostructures with distilled water to make simple “inks.” He then invented a quick and easy way to make thin films using equipment available in just about any lab — glass slides and double-sided tape.
“We used a hole punch to cut out wells from double-sided tape and stuck these to glass slides,” Stewart said. By adding a precise volume of ink into each tape “well” and then heating the wells — either to relatively low temperature to simply evaporate the water or to higher temperatures to begin melting the structures together — he created a variety of films to test.
The team say they weren’t surprised that the long nanowire films had the highest conductivity. Electrons usually flow easily through individual nanostructures but get stuck when they have to jump from one structure to the next, Wiley explained, and long nanowires greatly reduce the number of times the electrons have to make this “jump”.
But they were surprised at just how drastic the change was. “The resistivity of the long silver nanowire films is several orders of magnitude lower than silver nanoparticles and only 10 times greater than pure silver,” Stewart said.
The team is now experimenting with using aerosol jets to print silver nanowire inks in usable circuits. Wiley says they also want to explore whether silver-coated copper nanowires, which are significantly cheaper to produce than pure silver nanowires, will give the same effect.
Receive an email update when we add a new PRINTABLE ELECTRONIC DEVICES article.
The Latest on: Printable electronic devices
via Google News
The Latest on: Printable electronic devices
- Sticker Labels Market Business Revenue, Future Scope, Trends, Key Players And Forecast To 2022on November 29, 2019 at 3:55 am
Regulatory requirements of informative labels on pharmaceutical products and electronic medical devices escalate the market on the global platform ... The new service allows small businesses and those ...
- Lower House nods for Prohibition of Electronic Cigarettes Bill, 2019on November 27, 2019 at 4:06 am
The Bill seeks to ban the production, storage, import and sale of electronic cigarettes in India and defines e-cigarettes as electronic devices, heating a substance ... a friend (Opens in new window) ...
- Global Medical Device Security Solutions Market 2020-2024 | Increasing Demand for Cloud-Based Solutions to Boost the Market Growth | Technavioon November 26, 2019 at 6:46 am
Only $13.99 per month after promotional period. You will receive full, ad-free access to CitizenTribune.com as well as full access to the Electronic Edition of the newspaper. ONLY $7.99 per month for ...
- Small power relay series office and industrial electronic deviceon November 22, 2019 at 3:30 am
This series of relays has a functional shock resistance of 20g. As an accessory, print sockets are offered. Typical applications inclue PLC applications, measuring equipment, printers, data recorders, ...
- This ultimate pen-tool lets you cut, engrave, drill, etch, solder, and even 3D printon November 7, 2019 at 6:51 am
Well, they let you drill, engrave, burn-etch, solder, 3D print, screw-unscrew, and even cut (like a hand-held jigsaw blade ... Repair – 3D printed objects, toys, delaminated cables, electronic devices ...
- IIT Prints 3D Embedded Sensors in Electrical Packaging for Next Generation MEMS Devices Using Nano Dimension’s DragonFly Systemon September 26, 2019 at 7:22 am
With its unique 3D printing technologies, Nano Dimension is targeting the growing demand for electronic devices that require increasingly sophisticated features. Demand for circuitry, including PCBs - ...
- An Easy Hack to Print From An Android Device.on September 7, 2019 at 4:39 am
Brother is a Japanese multinational company that manufactures different electronic and computer-related ... one of them is mobile printing through Android devices. Brother gives you the freedom to ...
- Reading to Your Toddler? Print Books Are Better Than Digital Oneson May 16, 2019 at 8:02 am
Perhaps “the tablet is designed to be more of a personal device, perhaps parents and ... which acknowledged the many potential benefits of electronic books for children, but argued for continuing to ...
- Scientists develop new 3D printing technology, paves way for improvement in wearable deviceson April 28, 2019 at 10:04 am
Scientists have developed a process to 3D-print transparent and flexible electronic circuits, paving the way for improved wearable devices in the future. The electronics consists of a mesh of silver ...
via Bing News