Researchers at Nanyang Technological University, Singapore (NTU Singapore) have 3D printed a ready-to-fly drone with embedded electronics using aerospace-grade material.
The electronics were incorporated in the drone during the 3D printing process which employs Stratasys ULTEMTM 9085 – a high strength, lightweight FDM material certified for use in commercial aircrafts.
The drone is jointly developed by NTU’s Singapore Centre for 3D Printing (SC3DP) and Stratasys Asia Pacific, a subsidiary of Stratasys Ltd. (NASDAQ: SSYS), a 3D printing and additive manufacturing solutions company.
How the Flight-Ready Drone was Built
The drone – a quadcopter with four rotors – was designed, 3D printed and flown by Mr Phillip Keane, an NTU PhD candidate from the School of Mechanical and Aerospace Engineering who researches at the university’s Singapore Centre for 3D Printing (SC3DP).
In 3D printing, objects are created digitally layer by layer until completion. However, embedding electronics can be a challenge, as most will not survive the high temperatures of the 3D printing process.
Commercial grade electronics were therefore modified and placed within the drone at the various stages of the printing process. They survived the high temperature printing which reached over 160 degrees Celsius, compared to the usual 80 to 100 degrees. Only the motors and the propellers were mounted after the entire chassis was completed.
Mr Keane said: “One of the toughest challenges was to find electronic components that could theoretically survive the high temperature printing process – we had to add some heat-proofing modifications to the components to ensure they could last. This involved adding new components to the printed circuit boards and also designing custom housings.”
The drone was completed in under 14 hours. During the printing, there were just three pauses for the electronics to be placed within the chassis.
“The housings which were pre-printed in ULTEM 9085 also provide a flat surface for the 3D printer to continue printing over them. I also had to deal with tight time constraints as some of the components could not survive in the heat for more than 20 minutes.”
In addition to being extremely rugged, the drone is capable of supporting over 60kg of weight suspended from its structure. Moving forward, Mr Keane said he is working on the next version of the drone which will feature better durability, lighter weight and improved flight dynamics.
Professor Chua Chee Kai, Executive Director of NTU’s SC3DP said that this is a successful example of disruptive innovation that can be achieved when researchers from academia work with industry partners.
“At NTU, we have world leading researchers with vast knowledge of materials and 3D printing processes who have invented innovative techniques to overcome the limitations of existing technologies,” explained Prof Chua, the world’s most cited scientist in the field of 3D printing according to the Web of Science, a research database maintained by Thomson Reuters.
“Together with Stratasys’ engineers and their intimate knowledge of 3D printing, we were able to push the limits of today’s technology and print a drone that is incredibly durable and can withstand high heat.”
“This project exemplifies the power of Stratasys’ flagship Fused Deposition Modeling (FDM) 3D printing technology and perfectly demonstrates the strength of the ULTEM resin,” commented Fred Fischer, Director – Applications and Products, Stratasys Asia Pacific. “We look forward to researching, developing and unveiling more possibilities with 3D printing and materials as we work with industry partners and academia.”
ULTEM 9085 is a production-grade thermoplastic that can be 3D printed and is prized for a high strength-to-weight ratio and FST (flame, smoke and toxicity) rating, making it ideal for the commercial transportation industry, especially aerospace.
Professor Louis Phee, Chair, School of Mechanical and Aerospace Engineering at NTU, said that unmanned aerial vehicles (UAV) are a major research thrust at the school. “Being the first university in Singapore to offer an Aerospace Engineering degree programme, we have been successful in attracting the brightest students to work with our professors to push the frontiers of drone technologies to cater to Singapore’s unique needs and requirements. In the near future, I expect to see more exciting new drone technologies from NTU that will be translated into real applications.”
The Latest on: 3D printed drone
via Google News
The Latest on: 3D printed drone
- NASA Considers Shapeshifting Drones for Upcoming Missionson October 18, 2019 at 3:01 am
Aptly named the Shapeshifter, NASA’s experimental drone’s appearance is about as odd as the robot is capable. Shaped like a hamster wheel, the 3D-printed drone is comprised of two hemispheric ...
- Airbus and Local Motors Create Startup to 3D Print For Ground and Air Mobilityon October 17, 2019 at 11:09 pm
Airbus and Local Motors Industries (LMI) a digital vehicle manufacturer, recently partnered to create Neorizon, a micro-factory that hopes to build products at unprecedented speeds through co ...
- The US military is trying to read mindson October 16, 2019 at 4:13 pm
In August, three graduate students at Carnegie Mellon University were crammed together in a small, windowless basement lab, using a jury-rigged 3D printer frame to zap a slice of mouse brain with ...
- Airbus and LM Industries sign deal to 3D print drones, cars | IDTechEx Research Articleon October 15, 2019 at 9:39 am
For more information see the IDTechEx report on 3D Printing Materials 2019-2029: Technology and Market Analysis ... AV shuttle platform and Airbus' positioning system for drones enabling easier and ...
- This Northern Ont.-designed drone flies into tight and dangerous spaces in mineson October 15, 2019 at 9:00 am
A drone flies through a dark, treacherous mine tunnel ... At the moment, they have three DBRs, which they produced almost entirely out of 3D printed parts at their space on Trout Lake Road in North ...
- 3D Reconstruction Technology Market,Scope, Revenue, Trends, Drivers, Challenges and Competitive Landscape till 2023on October 14, 2019 at 7:17 am
3D printing, drones and robots. The study indicates that, in future, the 3d printing, drones and robots will be an important end user of 3D reconstruction technology market.The global 3D ...
- Terra Drone Launches UAV AI-Based Solution For Power Asset Inspectionon October 11, 2019 at 9:02 pm
This solution has been built from the ground up with the aim to simplify and streamline the maintenance work for transmission and distribution facilities. Also: DroneResponders Program, Drone ...
- Airbus signs deal to 3D-print drones and self-driving carson October 11, 2019 at 6:00 am
Airbus has created a new venture to manufacture drones and self-driving cars “at unprecedented speeds” with Local Motors Industries, a 3D-printing start-up in San Francisco. The two companies are ...
- How 3D technology is capturing the worldon October 7, 2019 at 4:55 pm
These were then digitised. Other industries are now turning to photogrammetry to make cheap, 3D surveys of large sites or facilities. Often, this involves flying a small camera-equipped drone around ...
via Bing News