Engineers at the University of California San Diego have fabricated the first semiconductor-free, optically-controlled microelectronic device. Using metamaterials, engineers were able to build a microscale device that shows a 1,000 percent increase in conductivity when activated by low voltage and a low power laser.
The discovery paves the way for microelectronic devices that are faster and capable of handling more power, and could also lead to more efficient solar panels. The work was published Nov. 4 in Nature Communications.
The capabilities of existing microelectronic devices, such as transistors, are ultimately limited by the properties of their constituent materials, such as their semiconductors, researchers said.
For example, semiconductors can impose limits on a device’s conductivity, or electron flow. Semiconductors have what’s called a band gap, meaning they require a boost of external energy to get electrons to flow through them. And electron velocity is limited, since electrons are constantly colliding with atoms as they flow through the semiconductor.
A team of researchers in the Applied Electromagnetics Group led by electrical engineering professor Dan Sievenpiper at UC San Diego sought to remove these roadblocks to conductivity by replacing semiconductors with free electrons in space. “And we wanted to do this at the microscale,” said Ebrahim Forati, a former postdoctoral researcher in Sievenpiper’s lab and first author of the study.
However, liberating electrons from materials is challenging. It either requires applying high voltages (at least 100 Volts), high power lasers or extremely high temperatures (more than 1,000 degrees Fahrenheit), which aren’t practical in micro- and nanoscale electronic devices.
To address this challenge, Sievenpiper’s team fabricated a microscale device that can release electrons from a material without such extreme requirements. The device consists of an engineered surface, called a metasurface, on top of a silicon wafer, with a layer of silicon dioxide in between. The metasurface consists of an array of gold mushroom-like nanostructures on an array of parallel gold strips.
The gold metasurface is designed such that when a low DC voltage (under 10 Volts) and a low power infrared laser are both applied, the metasurface generates “hot spots”—spots with a high intensity electric field—that provide enough energy to pull electrons out from the metal and liberate them into space.
Tests on the device showed a 1,000 percent change in conductivity. “That means more available electrons for manipulation,” Ebrahim said.
“This certainly won’t replace all semiconductor devices, but it may be the best approach for certain specialty applications, such as very high frequencies or high power devices,” Sievenpiper said.
|Scanning electron micrograph images of the semiconductor-free microelectronic device (top left) and the gold metasurface (top right, bottom). Image courtesy of UC San Diego Applied Electromagnetics Group.|
According to researchers, this particular metasurface was designed as a proof-of-concept. Different metasurfaces will need to be designed and optimized for different types of microelectronic devices.
“Next we need to understand how far these devices can be scaled and the limits of their performance,” Sievenpiper said. The team is also exploring other applications for this technology besides electronics, such as photochemistry, photocatalysis, enabling new kinds of photovoltaic devices or environmental applications.
The Latest on: Metamaterial microelectronics
via Google News
The Latest on: Metamaterial microelectronics
- Metamaterials enable semiconductor-free microelectronicson November 10, 2018 at 4:00 pm
These limitations to conductivity are what the researchers at UC San Diego looked to eliminate by exchanging semiconductors with a metamaterial that allowed electrons to flow freely through open space ...
- Navy engineer devises new way to enhance night vision for ground forceson September 19, 2018 at 9:35 am
Conley's metamaterial antenna will expand the sensed spectrum ... He earned his doctorate in microelectronics after six years as a Marine infantry sergeant. His first experience with infrared imaging ...
- SPIE Photonics Europe: startups debut at the Innovation Villageon April 24, 2018 at 6:01 am
Metamaterial gas sensor Gas sensing was also the theme ... Krzysztof Anders and colleagues from the Institute of Microelectronics and Optoelectronics (IMiO) in Warsaw have developed the approach under ...
- Abundance Insider: November 25 Editionon November 24, 2016 at 4:00 pm
In this week’s Abundance Insider: Supercomputer-supporting microgrids, VR’s influence on retirement savings and semiconductor-free metamaterial microelectronics. Cheers, Peter, Marissa, Cody, Kelley, ...
- Photoemission-Based Microelectronics Are Semiconductor-Freeon November 10, 2016 at 4:00 pm
A semiconductor-free, optically-controlled microelectronic device fabricated using metamaterials has shown a significant increase in conductivity when activated by low voltage and a low power laser.
- A microelectronic breakthrough: chips that need no semiconductoron November 9, 2016 at 8:45 am
Using this new technology, scientists may someday be able to build faster and more powerful microelectronics such as solar panels ... a layer of silicon dioxide in between the two. This metamaterial ...
- Metamaterials Unlock Microelectronics Without Semiconductorson November 8, 2016 at 6:13 am
such as photochemistry, photocatalysis, enabling new kinds of photovoltaic devices or environmental applications. For more metamaterials news, find out how this controllable metamaterial device ...
- Metamaterials empower semiconductor-free microelectronicson November 7, 2016 at 4:00 pm
The metamaterial is empowered by a metasurface, gold mushroom-like nanostructures etched onto an array of parallel gold strips. The metasurface is affixed to a silicon wafer, buffered by a layer of ...
- 'Metamaterials,' quantum dots show promise for new technologieson May 24, 2012 at 12:35 pm
The metamaterial - layers of silver and titanium oxide and ... which is about 1,000 times too large for today's microelectronics," Narimanov said. Nanostructured metamaterials, however, could make it ...
via Bing News