Berkeley Lab approach could lead to more stable, efficient artificial photosystems
Scientists have found a way to engineer the atomic-scale chemical properties of a water-splitting catalyst for integration with a solar cell, and the result is a big boost to the stability and efficiency of artificial photosynthesis.
Led by researchers at the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab), the project is described in a paper published this week in the journal Nature Materials.
The research comes out of the Joint Center for Artificial Photosynthesis (JCAP), a DOE Energy Innovation Hub established in 2010 to develop a cost-effective method of turning sunlight, water, and carbon dioxide into fuel. JCAP is led by the California Institute of Technology with Berkeley Lab as a major partner.
The goal of this study was to strike a careful balance between the contradictory needs for efficient energy conversion and chemically sensitive electronic components to develop a viable system of artificial photosynthesis to generate clean fuel.
Striking the right balance
“In order for an artificial photosystem to be viable, we need to be able to make it once, deploy it, and have it last for 20 or more years without repairing it,” said study principal investigator Ian Sharp, head of materials integration and interface science research at JCAP.
The problem is that the active chemical environments needed for artificial photosynthesis are damaging to the semiconductors used to capture solar energy and power the device.
“Good protection layers are dense and chemically inactive. That is completely at odds with the characteristics of an efficient catalyst, which helps to split water to store the energy of light in chemical bonds,” said Sharp, who is also a staff scientist at Berkeley Lab’s Chemical Sciences Division. “The most efficient catalysts tend to be permeable and easily transform from one phase to another. These types of materials would usually be considered poor choices for protecting electronic components.”
By engineering an atomically precise film so that it can support chemical reactions without damaging sensitive semiconductors, the researchers managed to satisfy contradictory needs for artificial photosystems.
“This gets into the key aspects of our work,” said study lead author Jinhui Yang, who conducted the work as a postdoctoral researcher at JCAP. “We set out to turn the catalyst into a protective coating that balances these competing properties.”
Doing double duty
The researchers knew they needed a catalyst that could not only support active and efficient chemical reactions, but one that could also provide a stable interface with the semiconductor, allow the charge generated by the absorption of light from the semiconductor to be efficiently transferred to the sites doing catalysis, and permit as much light as possible to pass through.
They turned to a manufacturing technique called plasma-enhanced atomic layer deposition, performed at the Molecular Foundry at Berkeley Lab. This type of thin-film deposition is used in the semiconductor industry to manufacture integrated circuits.
“This technique gave us the level of precision we needed to create the composite film,” said Yang. “We were able to engineer a very thin layer to protect the sensitive semiconductor, then atomically join another active layer to carry out the catalytic reactions, all in a single process.”
The first layer of the film consisted of a nanocrystalline form of cobalt oxide that provided a stable, physically robust interface with the light-absorbing semiconductor. The other layer was a chemically reactive material made of cobalt dihydroxide.
“The design of this composite coating was inspired by recent advances in the field that have revealed how water-splitting reactions occur, at the atomic scale, on materials. In this way, mechanistic insights guide how to make systems that have the functional properties we need,” said Sharp.
Using this configuration, the researchers could run photosystems continuously for three days—potentially longer—when such systems would normally fail in mere seconds.
“A major impact of this work is to demonstrate the value of designing catalysts for integration with semiconductors,” said Yang. “Using a combination of spectroscopic and electrochemical methods, we showed that these films can be made compact and continuous at the nanometer scale, thus minimizing parasitic light absorption when integrated on top of photoactive semiconductors.”
The study authors noted that while this is an important milestone, there are many more steps needed before a commercially viable artificial photosystem is ready for deployment.
“In general, we need to know more about how these systems fail so we can identify areas to target for future improvement,” said Sharp. “Understanding degradation is an important avenue to making something that is stable for decades.”
The Latest on: Artificial photosynthesis
via Google News
The Latest on: Artificial photosynthesis
- New directions for energy from sunlighton May 19, 2020 at 6:54 am
This webinar will explore opportunities in high-efficiency photovoltaics and artificial photosynthesis, and in particular, the generation of chemical fuels from sunlight by reduction of carbon dioxide ...
- Formate dehydrogenase reduces carbon dioxide to formic acidon May 18, 2020 at 7:41 am
Professor Yutaka Amao of the Osaka City University Artificial Photosynthesis Research Center and Ryohei Sato, a 1st year Ph.D. student of the Graduate School of Science majoring in Physics and ...
- Hacking Plant Life: Artificial Photosynthesis Takes a Leap Forwardon May 11, 2020 at 7:07 am
Perhaps most excitingly, it could open the door to creating truly self-sustaining artificial lifeforms. Photosynthesis involves a complex interplay of multiple enzymatic pathways, so efforts to ...
- Daily briefing: Cyber-spinach gives artificial photosynthesis a booston May 10, 2020 at 5:00 pm
A cyber-spinach boost for photosynthesis A biological membrane from spinach leaves can work in tandem with a highly efficient engineered chemical pathway to turn CO 2 into sugars.The artificial ...
- “With MaxSynBio we are world class!”on May 10, 2020 at 5:00 pm
If we succeed in extracting carbon dioxide from the atmosphere as a valuable raw material with artificial photosynthesis systems, we can help overcome the climate crisis.
- Toward artificial photosynthesison May 7, 2020 at 11:33 am
The development of a synthetic liposome harboring functional adenosine triphosphate (ATP) synthase and bacteriorhodopsin to establish a proton gradient, and thus driving ATP synthesis, was a ...
- Highly efficient hydrogen gas production using sunlight, water and hematiteon May 6, 2020 at 5:00 pm
When the photocatalysts were placed in an alkaline solution and illuminated with artificial ... (2020, May 7). Highly efficient hydrogen gas production using sunlight, water and hematite.
- An Iron Based Oxygen Evolving Catalyst for Artificial Photosynthesis:on May 2, 2020 at 5:00 pm
We found that a complex containing five iron atoms serve as a highly efficient and robust water oxidation catalyst owing to the presence of redox flexibility, which enables smooth charge accumulation ...
- Tiny ‘forest’ advances artificial photosynthesison April 21, 2020 at 5:00 pm
“We believe our system is a revolutionary leap forward in the field of artificial photosynthesis,” says study co-leader Peidong Yang, a chemist with the US Department of Energy’s Lawrence Be ...
via Bing News