Alcator C-Mod tokamak nuclear fusion reactor sets world record on final day of operation.
scientists and engineers at MIT’s Plasma Science and Fusion Center made a leap forward in the pursuit of clean energy. The team set a new world record for plasma pressure in the Institute’s Alcator C-Mod tokamak nuclear fusion reactor. Plasma pressure is the key ingredient to producing energy from nuclear fusion, and MIT’s new result achieves over 2 atmospheres of pressure for the first time.
Alcator leader and senior research scientist Earl Marmar will present the results at the International Atomic Energy Agency Fusion Energy Conference, in Kyoto, Japan, on Oct. 17.
Nuclear fusion has the potential to produce nearly unlimited supplies of clean, safe, carbon-free energy. Fusion is the same process that powers the sun, and it can be realized in reactors that simulate the conditions of ultrahot miniature “stars” of plasma — superheated gas — that are contained within a magnetic field.
For over 50 years it has been known that to make fusion viable on the Earth’s surface, the plasma must be very hot (more than 50 million degrees), it must be stable under intense pressure, and it must be contained in a fixed volume. Successful fusion also requires that the product of three factors — a plasma’s particle density, its confinement time, and its temperature — reaches a certain value. Above this value (the so-called “triple product”), the energy released in a reactor exceeds the energy required to keep the reaction going.
Pressure, which is the product of density and temperature, accounts for about two-thirds of the challenge. The amount of power produced increases with the square of the pressure — so doubling the pressure leads to a fourfold increase in energy production.
During the 23 years Alcator C-Mod has been in operation at MIT, it has repeatedly advanced the record for plasma pressure in a magnetic confinement device. The previous record of 1.77 atmospheres was set in 2005 (also at Alcator C-Mod). While setting the new record of 2.05 atmospheres, a 15 percent improvement, the temperature inside Alcator C-Mod reached over 35 million degrees Celsius, or approximately twice as hot as the center of the sun. The plasma produced 300 trillion fusion reactions per second and had a central magnetic field strength of 5.7 tesla. It carried 1.4 million amps of electrical current and was heated with over 4 million watts of power. The reaction occurred in a volume of approximately 1 cubic meter (not much larger than a coat closet) and the plasma lasted for two full seconds.
Other fusion experiments conducted in reactors similar to Alcator have reached these temperatures, but at pressures closer to 1 atmosphere; MIT’s results exceeded the next highest pressure achieved in non-Alcator devices by approximately 70 percent.
While Alcator C-Mod’s contributions to the advancement of fusion energy have been significant, it is a science research facility. In 2012 the DOE decided to cease funding to Alcator due to budget pressures from the construction of ITER. Following that decision, the U.S. Congress restored funding to Alcator C-Mod for a three-year period, which ended on Sept. 30.
“This is a remarkable achievement that highlights the highly successful Alcator C-Mod program at MIT,” says Dale Meade, former deputy director at the Princeton Plasma Physics Laboratory, who was not directly involved in the experiments. “The record plasma pressure validates the high-magnetic-field approach as an attractive path to practical fusion energy.”
“This result confirms that the high pressures required for a burning plasma can be best achieved with high-magnetic-field tokamaks such as Alcator C-Mod,” says Riccardo Betti, the Robert L. McCrory Professor of Mechanical Engineering and Physics and Astronomy at theUniversity of Rochester.
Alcator C-Mod is the world’s only compact, high-magnetic-field fusion reactor with advanced shaping in a design called a tokamak (a transliteration of a Russian word for “toroidal chamber”), which confines the superheated plasma in a donut-shaped chamber. C-Mod’s high-intensity magnetic field — up to 8 tesla, or 160,000 times the Earth’s magnetic field — allows the device to create the dense, hot plasmas and keep them stable at more than 80 million degrees. Its magnetic field is more than double what is typically used in other designs, which quadruples its ability to contain the plasma pressure.
C-Mod is third in the line of high-magnetic-field tokamaks, first advocated by MIT physics professor Bruno Coppi, to be built and operated at MIT. Ron Parker, a professor of electrical engineering and computer science, led its design phase. Professor Ian Hutchinson of the Department of Nuclear Science and Engineering led its construction and the first 10 years of operation through 2003.
Unless a new device is announced and constructed, the pressure record just set in C-Mod will likely stand for the next 15 years. ITER, a tokamak currently under construction in France, will be approximately 800 times larger in volume than Alcator C-Mod, but it will operate at a lower magnetic field. ITER is expected to reach 2.6 atmospheres when in full operation by 2032, according to a recent Department of Energy report.
Alcator C-Mod is also similar in size and cost to nontokamak magnetic fusion options being pursued by private fusion companies, though it can achieve pressures 50 times higher. “Compact, high-field tokamaks provide another exciting opportunity for accelerating fusion energy development, so that it’s available soon enough to make a difference to problems like climate change and the future of clean energy — goals I think we all share,” says Dennis Whyte, the Hitachi America Professor of Engineering, director of the Plasma Science and Fusion Center, and head of the Department of Nuclear Science and Engineering at MIT.
These experiments were planned by the MIT team and collaborators from other laboratories in the U.S. — including the Princeton Plasma Physics Laboratory, the Oak Ridge National Laboratory, and General Atomics — and conducted on the Alcator C-Mod’s last day of operation. The Alcator C-Mod facility, which officially closed after 23 years of operation on Sept. 30, leaves a profound legacy of collaboration. The facility has contributed to more than 150 PhD theses and dozens of interinstitutional research projects.
To understand how Alcator C-Mod’s design principles could be applied to power generation, MIT’s fusion group is working on adapting newly available high-field, high-temperature superconductors that will be capable of producing magnetic fields of even greater strength without consuming electricity or generating heat. These superconductors are a central ingredient of a conceptual pilot plant called the Affordable Robust Compact (ARC) reactor, which could generate up to 250 million watts of electricity.
Learn more: New record for fusion
The Latest on: Nuclear fusion
via Google News
The Latest on: Nuclear fusion
- Nuclear fusion promises a clean, green energy future — but there's a catchon April 7, 2020 at 2:30 pm
The promise is enticing — a safe form of nuclear power to end the world's reliance on fossil fuels. But can it be done? Hundreds of scientists from around the globe are in a multi-billion-dollar race ...
- Hubble's Exciting Universe: Beholding the Birth and Death of Starson April 6, 2020 at 9:11 am
They are assembled into giant star clusters, like towns. In turn, the towns and cities are assembled into continents – the galaxies. Stars are the nuclear fusion-driven furnaces for forging the ...
- Parker spiral created in the laboratory for the first time everon March 31, 2020 at 8:20 am
The Sun is a spinning ball of plasma that generates its own magnetic field. Fueled by the nuclear fusion in its core, the Sun spews plasma out into the solar system. This process forms the solar wind.
- Ask Ethan: How Can A Nuclear Bomb Be Hotter Than The Center Of Our Sun?on March 27, 2020 at 11:02 pm
The mushroom cloud resulting from the nuclear weapon test Bravo (yield 15 Mt) on Bikini Atoll. The ... [+] In terms of raw energy output, nothing on our world compares to our Sun. Deep inside our Sun, ...
- Astronomers Discover Two Brown Dwarfs Eclipsing Each Other In Triple Systemon March 27, 2020 at 1:32 pm
The system contains not one but three brown dwarfs, stellar objects that were never massive enough to begin nuclear fusion at their core and become full-fledged stars (often refered to as failed stars ...
- The Sun: Extremely loud and incredibly hoton March 26, 2020 at 11:50 am
You know, for how often we see the Sun, there’s an awful lot we don’t know about it. I mean, we know it’s powered by nuclear fusion, that it’s 92.96 million miles away, and that it’s about a million ...
- The US Comes One Step Closer To Producing Commercial Fusion Poweron March 26, 2020 at 8:18 am
The nearly 200-page report hopes to align the fusion research community so that obtaining a commercial fusion energy source within the United States might become a reality. “It’s the whole community, ...
- Commercial Nuclear Fusion Is Closer Than Everon March 18, 2020 at 2:30 pm
Nuclear fusion has long been touted as a silver bullet solution to climate change, with it’s hugely efficient, emissions-free energy production with none of the radioactive waste that nuclear ...
- Twisted Nuclear Fusion Is Much Closer to Actually Happeningon March 16, 2020 at 3:33 pm
A researcher in New Jersey says he had a nuclear fusion breakthrough while helping his son with a science project. He realized he could explore which kinds of permanent magnets could be powerful ...
via Bing News