Injecting bubbles at a ship’s hull is an effective way of reducing drag, and fuel consumption of the ship.
That is, if those bubbles have the right size. Researchers of the University of Twente show that the reduction is negligible when tiny bubbles are used. Large, deformable bubbles do the trick, the scientists conclude in Physical Review Letters of September 2.
Blowing bubbles underneath a ship’s hull, causes them to be pushed against the surface. In the surface layer between the ship and water, these air bubbles cause less friction: it’s also known as air lubrication. In practice, friction can be reduced 20 percent, with a huge impact on fuel consumption and CO2 emission. The precise mechanism is still unknown, as the local water flow is complex and turbulent. As the UT scientists prove now: the size of the bubbles make a big difference: tiny bubble don’t have a net effect at all. This may seem counterintuitive, but large bubbles that can be deformed easily, give the strongest effect.
For investigating the effects, the University of Twente has a unique ‘Taylor Couette’ setup, capable of generating fully developed turbulent flow. This machine consist of two large cylinders with fluid in between. When the inner cylinder is turning fast, injected bubbles will be pressed against the surface, just like they do at the ship’s hull. At the surface of the cylinder, they start influencing friction/drag. This setup enables the scientists to search for the relevant parameters in efficient air lubrication.
With four percent of air in the water, a reduction of 40 percent is feasible in the experimental setup, using large, millimeter size bubbles. By adding a tiny amount of ‘surfactant’, the scientists were able to vary the surface tension between bubbles and water, and they could vary bubble dimensions. The other properties, like flow speed and density, were kept the same. What was the result? On average, the bubbles get much smaller, because the surfactant prevents bubbles getting together, coalescing, forming larger bubbles. Within the turbulent flow, the bubble have a uniform distribution and moreover, they will not be pushed against the surface. With, again, four percent of air that is in microbubbles now, there is four percent reduction: there is no net air lubrication at the ship’s hull. Ruben Verschoof: “From previous experiments, we knew that deformable bubbles work well, but in no way we expected a dramatic difference like this.
By doing the experiments in real life turbulent flows, and not in the simplified situation of slow and laminary flow, the outcome of this research is directly applicable in the naval sector. For reducing drag in pipelines, the experiments also provide valuable new insight.
Learn more: AIR LUBRICATION: LARGE BUBBLES DO THE TRICK
The Latest on: Air lubrication for ships
via Google News
The Latest on: Air lubrication for ships
- TMC bags ALS compressor contract for seven LNG newbuildson January 24, 2020 at 6:06 am
... carriers the Korean shipbuilder is constructing for Capital Gas Corp. TMC has developed a range of marine compressors for use in combination with air lubrication systems (ALS) to help ships ...
- Fraught with environmental baggage, the cruise industry is trying to go green, but is it enough?on January 21, 2020 at 2:29 pm
Putting in advanced wastewater treatment systems has been a good step forward. Cruise lines have made their ships more fuel efficient by implementing a few different tactics, according to CLIA. They ...
- TMC Develops ALS Compressorson January 12, 2020 at 7:26 pm
TMC Compressors of the Seas is launching a new range compressors designed to work air lubrication systems (ALS) for the shipping and offshore industries to help ships further reduce fuel consumption ...
- wartsilia and Silverstream to Accelerate Deployment of Air Lubrication Technologyon December 5, 2019 at 10:35 pm
This new collaborative partnership will accelerate the deployment of air lubrication systems across all vessel classes, from small bulk vessels to the largest container ships. By combining ...
- Wärtsilä and Silverstream to collaborate on accelerating deployment of air lubrication technologyon December 1, 2019 at 5:00 pm
This new collaborative partnership will accelerate the deployment of air lubrication systems across all vessel classes, from small bulk vessels to the largest container ships. By combining Wärtsilä’s ...
- Daewoo shipyard delivers first LNG carrier installed with air lubrication systemon November 18, 2019 at 4:00 pm
It was the first LNG carrier which has been installed with the shipbuilder’s air lubrication system that ... a layer of air bubbles beneath the ship’s hull. Air bubble outlets are created ...
- Lubricant for oil tankerson January 24, 2019 at 7:03 am
If ship hulls were coated with special high-tech air trapping materials ... sensation in a completely different context: as a potent lubricant for oil tankers.
- Air Lubrication Technology for Ships Shows Verified Energy Savingson February 4, 2015 at 9:18 pm
Sea trials of Silverstream Technologies’ new air lubrication technology for ships, the Silverstream System, showed net energy efficiency savings in all analyzed cases. Shell funded and helped oversee ...
- ClassNK Certifies Ship with Air Lubrication Systemon October 29, 2014 at 9:52 am
ClassNK has completed the EEDI appraisal of Harvest Frost, the world’s first post-panamax bulk carrier fitted with the Mitsubishi Air Lubrication ... based on hull form, ship speed, and engine ...
via Bing News