Berkeley Lab scientists are developing a new way to detect microscopic fractures in materials in the field
Light-emitting, four-armed nanocrystals could someday form the basis of an early warning system in structural materials by revealing microscopic cracks that portend failure, thanks to recent research by scientists from the U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) and UC Berkeley.
The researchers embedded tetrapod-shaped quantum dots, which are nanosized semiconducting particles, in a polymer film. The tetrapods’ cores emit fluorescent light when their arms are twisted or bent out of shape. This indicates the polymer is undergoing a degree of tensile or compressive strain, from which stress over sub-micron-scale regions of the material can be detected. Such stress can cause nanoscale cracks to develop into macroscopic failure. Initial tests show the tetrapods can cycle more than 20 times without losing their ability to sense stress, and they don’t degrade the strength of the polymer in which they’re matrixed.
So far the scientists have tested their approach in the lab, but in practice, all that would be needed to detect the tetrapods’ fluorescent warning is an off-the-shelf, portable spectrometer. A person could point a spectrometer at a steel beam, airplane wing, or any material that has the tetrapods embedded inside, and the spectrometer could potentially detect incipient cracks that are only 100 nanometers long.
“This is the length scale at which cracks develop, which is when you want to catch them, well before the material fails,” says Shilpa Raja, who conducted the research while she was an affiliate in Berkeley Lab’s Materials Sciences Division and a PhD student at UC Berkeley. Raja is now a postdoctoral scholar at Stanford University. Robert Ritchie and Paul Alivisatos, also of the Materials Sciences Division and UC Berkeley, are the co-corresponding authors of a paper on this research published online in the journal Nano Letters (2016, vol. 16, issue 8, pgs. 5060-5067).
“Our approach could also be a big step toward self-healing smart materials. The tetrapods could be coupled with nanosized repair particles to form a material that senses local stress and then repairs itself,” adds Raja.
In addition to materials applications, the tetrapods could potentially be used to detect the presence of cancerous cells in tissue samples because cancerous cells have different mechanical properties than healthy cells, such as an increased stiffness.
To develop the technique, the scientists started with a polymer widely used in airframes and other structures. They mixed tetrapod nanocrystals into the polymer and cast slabs of the mixture in petri dishes. The slabs were then mounted in a tensile tester and exposed to a laser. This allowed the researchers to simultaneously measure the slab’s fluorescence and mechanical stress.
“This is a low-cost fabrication technique, and it resulted in the best optomechanical agreement between fluorescence and mechanical tests sensed by a nanocrystal in a film,” says Raja.
Raja says the tetrapods’ shape makes them very sensitive to stress. Their four arms act as antennae that take stress from their immediate environment, amplify the stress, and transfer it to the core. The color of light emitted by the core indicates the degree of stress (and strain) felt by the arms.
Their approach promises to be a big improvement over current ways to detect nanoscale stress in materials, particularly in the field. This can be done in the lab with techniques like atomic force microscopy and nano-indentation techniques, but these require a very controlled environment. Over the past five years, scientists have developed ways to matrix other stress-sensing nanoparticles into materials, but these methods have a very low signal-to-noise ratio and don’t use visible light detection. In addition, some of these approaches degrade the mechanical properties of the material they’re embedded in, or they can’t cycle back and forth, meaning they can only give a warning signal once.
The Latest on: Nanoscale tetrapods
via Google News
The Latest on: Nanoscale tetrapods
- Visualization nanozyme based on tumor microenvironment “unlocking” for intensive combination therapy of breast canceron November 27, 2020 at 1:30 pm
1 Beijing Key Laboratory for Magnetoelectric Materials and Devices, Department of Materials Science and Engineering, College of Engineering, Beijing Innovation Centre for Engineering Science and ...
- Archaeology & Fossils newson November 24, 2020 at 4:00 pm
The ancient inhabitants of the American Southwest used around 11,500 feathers to make a turkey feather blanket, according to a new paper in the Journal of Archaeological Science: Reports.
- Archaeology & Fossils newson November 23, 2020 at 4:00 pm
A trio of researchers from Northwestern University, Metropolitan State University of Denver and Argonne National Laboratory has found that using X-ray diffraction on mummies makes it possible to ...
- Shaping Cancer Nanomedicineon November 15, 2020 at 4:00 pm
Nanomedicine. 2014;9(1):121-134. Table 1. Nonspherical nanoparticles of various shapes fabricated in recent years. Shape Types Materials Methods Ref. 2D polygonal Triangle, square, pentagon ...
- Nanotechnology Research - Universitieson October 29, 2017 at 11:22 pm
Dr. Filler's research group works at the interface of chemical engineering and materials science, emphasizing the atomic-level engineering of nanoscale semiconductors ... quantum dots (rods, tetrapods ...
- Nanotechnology Research Laboratorieson September 10, 2017 at 2:20 pm
The group's research focuses on nanostructured functional materials (NanoFM), including polymer-based nanocomposites, block copolymers, polymer blends, conjugated polymers, quantum dots (rods, ...
via Bing News