Inspired by the humble cactus, a new type of membrane has the potential to significantly boost the performance of fuel cells and transform the electric vehicle industry.
The membrane, developed by scientists from CSIRO and Hanyang University in Korea, was described today in the journal Nature . The paper shows that in hot conditions the membrane, which features a water repellent skin, can improve the efficiency of fuel cells by a factor of four.
According to CSIRO researcher and co-author Dr Aaron Thornton, the skin works in a similar way to a cactus plant, which thrives by retaining water in harsh and arid environments.
“Fuel cells, like the ones used in electric vehicles, generate energy by mixing together simple gases, like hydrogen and oxygen. However, in order to maintain performance, proton exchange membrane fuel cells – or PEMFCs – need to stay constantly hydrated,” Dr Thornton said.
“At the moment this is achieved by placing the cells alongside a radiator, water reservoir and a humidifier. The downside is that when used in a vehicle, these occupy a large amount of space and consume significant power,” he said.
According to CSIRO researcher and co-author Dr Cara Doherty, the team’s new cactus-inspired solution offers an alternative.
“A cactus plant has tiny cracks, called stomatal pores, which open at night when it is cool and humid, and close during the day when the conditions are hot and arid. This helps it retain water,” Dr Doherty said.
“This membrane works in a similar way. Water is generated by an electrochemical reaction, which is then regulated through nano-cracks within the skin. The cracks widen when exposed to humidifying conditions, and close up when it is drier.
“This means that fuel cells can remain hydrated without the need for bulky external humidifier equipment. We also found that the skin made the fuel cells up to four times as efficient in hot and dry conditions,” she said.
Professor Young Moo Lee from Hanyang University, who led the research, said that this could have major implications for many industries, including the development of electric vehicles.
“At the moment, one of the main barriers to the uptake of fuel cell electric vehicles is water management and heat management in fuel cell systems. This research addresses this hurdle, bringing us a step closer to fuel cell electric vehicles being more widely available.
“This technique could also be applied to other existing technologies that require hydrated membranes, including devices for water treatment and gas separation,” he said.
Learn more: Cactus inspired skin gives electric cars a spike
The Latest on: Fuel cells
via Google News
The Latest on: Fuel cells
- VW CEO compares company to Nokia, says will cut fuel cells to accelerate battery EVson January 18, 2020 at 3:48 pm
That’s still not soon enough, according to CEO Herbert Diess. To accelerate its electric-car and self-driving programs, VW will cut resources devoted to fuel cells. Will it be enough? Diess told ...
- Stationary Fuel Cell Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast, 2019 - 2027on January 17, 2020 at 3:04 am
Stationary Fuel Cell Market - Scope of the Report. The latest study collated and published analyzes the historical and present-day scenario of the global stationary fuel cell market to accurately ...
- Fuel Cell Gas Diffusion Layer Market Size, Global Trends, Latest Techniques, Key Segments And Geography Foresights Till 2026on January 16, 2020 at 11:41 pm
Top Players in Fuel Cell Gas Diffusion Layer Market are Toray Industries, Inc., The Chemours Company, Mitsubishi Chemical Corporation, DuPont, Horizon Fuel Cell Technologies, Ballard Power Systems, ...
- Fuel Cell Stack Market Highlights By Type And End Users, Phenomenal Growth Forecast Till 2026on January 16, 2020 at 11:41 pm
Top Players in Fuel Cell Stack Market are Solvay, Dana Incorporated, Freudenberg Group, TOTO Ltd, Commonwealth Automation Technologies, Inc, Robert Bosch GmbH, Horizon Fuel Cell Technologies, Ballard ...
- Plant-Microbial Fuel Cell Powered IoTon January 16, 2020 at 9:33 am
This particular ‘fuel cell’ was a 50x500mm plant pot with grass, which was able to producedover 0.2 mW continuously, well as long as the plants were still alive. That is not a lot of energy, but it is ...
- Honda And Isuzu Will Work Together On Fuel Cell-Powered Electric Truckson January 15, 2020 at 6:00 pm
Honda R&D Co. Ltd . (NYSE: HMC ) and Isuzu Motors Ltd . (OTC: ISUZY ) will jointly research hydrogen-powered fuel cell heavy-duty electric trucks as Honda makes its fuel cell expertise available to an ...
- Honda, Isuzu power up fuel cell partnership for heavy-duty truckson January 15, 2020 at 5:26 am
Japan’s Honda Motor Co ( 7267.T) and Isuzu Motors Ltd ( 7202.T) on Wednesday said they would jointly research the use of hydrogen fuel cells to power heavy-duty trucks, looking to expand fuel cell use ...
- Ballard signs ESAs for fuel cell stackson January 14, 2020 at 9:33 am
Ballard Power (NASDAQ:BLDP) +7.1% premarket after signing Equipment Sales Agreements for the provision of an initial 500 FCgen-1020ACS fuel cell stacks to adKor and SFC Energy. The systems will be ...
- Metal–organic framework–derived [email protected] and [email protected] as anode catalysts for urea fuel cellson January 14, 2020 at 3:09 am
A direct urea fuel cell with [email protected] as an anode catalyst featured an excellent maximum power density of 13.8 mW cm −2 with 0.33 M urea solution in 1 M KOH as fuel and humidified air as oxidant at 50 °C, ...
- Ballard Signs ESAs for Fuel Cell Stacks to Support Backup Power Systems at German Radio Towerson January 13, 2020 at 9:42 pm
today announced that it has signed Equipment Sales Agreements (ESAs) for the provision of an initial 500 FCgen®-1020ACS fuel cell stacks to adKor GmbH ("adKor"; www.adkor.de/en/) and SFC Energy AG ...
via Bing News