The new lens could be used for biomedical research and security imaging
From visible light to radio waves, most people are familiar with the different sections of the electromagnetic spectrum. But one wavelength is often forgotten, little understood, and, until recently, rarely studied. It’s called terahertz, and it has important applications in imaging and communications.
“Terahertz is somewhat of a gap between microwaves and infrared,” said Northwestern Engineering’s Cheng Sun. “People are trying to fill in this gap because this spectrum carries a lot of information.”
Sun and his team have used metamaterials and 3-D printing to develop a novel lens that works with terahertz frequencies. Not only does it have better imaging capabilities than common lenses, but it opens the door for more advances in the mysterious realm of the terahertz.
Supported by the National Science Foundation, the work was published online on April 22 in the journal Advanced Optical Materials.
“Typical lenses — even fancy ones — have many, many components to counter their intrinsic imperfections,” said Sun, associate professor of mechanical engineering. “Sometimes modern imaging systems stack several lenses to deliver optimal imaging performance, but this is very expensive and complex.”
The focal length of a lens is determined by its curvature and refractive index, which shapes the light as it enters. Without components to counter imperfections, resulting images can be fuzzy or blurred. Sun’s lens, on the other hand, employs a gradient index, which is a refractive index that changes over space to create flawless images without requiring additional corrective components.
There are two major factors that made this new lens possible. First, it is made from a novel metamaterial that exhibits properties not readily available in nature. “Such properties originate from its tiny structures that are much smaller than the terahertz wavelength,” said Fan Zhou, the paper’s first author and member of Sun’s laboratory. “By assembling these tiny structures, we can create specific refractive index distribution.”
Second, the lens was manufactured with a 3-D printing technique called projection micro-stereo-lithography. The technique enables a scalable, rapid, and inexpensive way to produce the tiny features that are needed for the lens to operate at the terahertz frequency band. The printing technology allowed the researchers to fabricate the metamaterial to precisely fit their designs.
“For printing, we use a photo-polymer in liquid form,” Sun said. “When we shine a light on the material, it converts it into a solid. The material forms to the shape of the light, allowing us to create a 3-D structure. You cannot accomplish a gradient index with traditional manufacturing processes.”
The lens could make terahertz imaging, which is particularly useful for security, cheaper, higher resolution, and more available. While X-rays can detect metal, they cannot detect plastic or chemicals. Terahertz scanners, however, can detect both of items to discover concealed weapons, biological weapons such as anthrax, and plastic explosives. And unlike X-rays, terahertz radiation is completely harmless to humans.
“This advance means we can unveil previously inaccessible information of some opaque materials in high resolution,” said Wei Cao, Sun’s collaborator at Oklahoma State University. “This opens up an entirely new technique for a massive range of potential uses from biomedical research to security.”
Learn more: Light-powered 3-D Printer Creates Terahertz Lens
The Latest on: Terahertz imaging
via Google News
The Latest on: Terahertz imaging
- Molecular Design of Bioorthogonal Probes and Imaging Reagents Derived from Photofunctional Transition Metal Complexeson January 9, 2020 at 3:28 pm
China State Key Laboratory of Terahertz and Millimeter Waves, City University of Hong Kong ... For more than 15 years, bioorthogonal chemistry has received increasing attention due to its successful ...
- Israeli researchers find way to create and control elusive terahertz waveson January 8, 2020 at 5:57 pm
A group of researchers at Tel Aviv University say they have developed a new way to produce and control terahertz waves, an elusive type of electromagnetic wave, using nanometric materials. These waves ...
- TAU team controls terahertz waves to better detect cavities, explosiveson January 7, 2020 at 4:07 pm
“The ability to fully control the spatial shape and other properties of terahertz waves, as demonstrated in the study, enables the development and implementation of advanced imaging methods and new ...
- Terahertz Spectroscopy Market 2020 Analysis and Advancements Outlook till 2026on January 2, 2020 at 1:43 am
technique used for dielectric (nonconducting, i.e., an insulator) materials analysis and quality control in the pharmaceutical, biomedical, security, materials characterization, and aerospace ...
- Toward Compact and Real-Time Terahertz Dual-Comb Spectroscopy Employing a Self-Detection Schemeon December 20, 2019 at 2:53 pm
Furthermore, we demonstrate practical terahertz transmission dual-comb spectroscopy with our device, by implementing a short air path at room temperature. Spectra are shown of semiconductor samples ...
- Laser combo opens up futuristic terahertz technologyon November 25, 2019 at 3:20 am
This new combined laser terahertz source, product of a collaboration between researchers at Harvard, the US Army, MIT and Duke University, paves the way for future technologies, from T-ray imaging in ...
- Terahertz laser to power 'T-ray' vision and high-bandwidth communicationson November 15, 2019 at 6:38 am
widely tunable terahertz laser that offers the potential for high-bandwidth communications, ultrahigh-resolution imaging and precise long-range sensing for radio astronomy. Until now, the terahertz ...
- Terahertz Radiation Systems: Technologies and Global Marketson October 24, 2019 at 5:22 am
THz imaging devices are the largest device segment in 2018-2019.Other types of THz devices should gain in importance in subsequent years, however. By 2024, THz-driven accelerators are expected to be ...
- High speed 5000 FPS terahertz imaging scanners for conveyorson October 20, 2019 at 9:26 am
Scitech introduces a new high-speed terahertz imaging scanner from TeraSense designed for simple integration into conveyor systems. Delivering an unprecedented imaging speed of 5000 frames per second, ...
- Terahertz Imaging System on a Chip Offers Speed and Portabilityon July 29, 2019 at 5:40 am
An imaging system developed at Princeton University uses lasers small enough to fit on a microchip, and emits and detects electromagnetic radiation at terahertz (THz) frequencies. The new system, ...
via Bing News