New technologies are starved for efficient and inexpensive catalysts. The best materials are made up of nanoparticles, whose properties are the result of their small size. The single catalyst particles have, however, an ugly tendency to cluster into larger particles, thereby reducing their effectiveness.
A group of scientists from the International School of Advanced Studies in Trieste and the DEMOCRITOS centre of the Istituto Officina dei Materiali of the Italian National Research Council (IOM-CNR), with the collaboration of other institutions, have developed a material that maintains the stability of a “dispersed” catalyst, thus maximising the efficiency of the process and decreasing costs and wastage. The study has just been published in Nature Communications.
Platinum is one of the costly metals used as catalysts in new technologies employed for industrial chemical processes, renewable energy sources, pollution control and many other purposes. In particular, it is used for fuel cells, devices that turn chemical energy directly into electrical energy, without combustion. Research has shown that the greatest efficiency is achieved when the catalyst is available in the form of nanoparticles (smaller than 10-9 m). Simply put, the greater the dispersion of the material and the smaller the size of the particles, the more is it available for catalysis. Unfortunately, the laws of thermodynamics cause the particles to “stick” to one another and form larger clusters, which is why the material becomes less effective over time. So what can be done to maintain maximal dispersion of the “nanopowder”?
A group of SISSA/CNR IOM scientists (with the collaboration of the Univerzita Karlova in Prague) has studied a way to produce tiny platinum grains consisting of one atom only and to keep them dispersed in a stable manner, by exploiting the properties of the substrate on which they rest.
“Theoretical work demonstrated that irregularities in the surface known as steps and observed in experiments conducted at the Trieste Synchrotron tend to attract and separate the nanoparticles, causing them to remain literally attached in the form of single atoms”, explains Stefano Fabris, CNR-IOM/SISSA research fellow.
“The particles adhering to the steps were no longer visible even using an atomic resolution microscope” explains Nguyen-Dung Tran, a SISSA PhD student. “However, their presence was detected by spectroscopy, so they were indeed there, but they were no longer visible or free to move around”. “Our computer simulations solved this dilemma, showing that the particles on the steps are reduced to single atoms” adds Matteo Farnesi Camellone (CNR-IOM), another author of the study.
“If the surface is engineered to contain a large number of these defects, then the force that binds the particles to the substrate effectively offsets the aggregation force”, explains Fabris. The theoretical work, led by Fabris, allowed the researchers to develop a “system model” on the computer able predict the behaviour of the material. The model’s predictions were confirmed by the experimental measurements. Materials like this can be used for fuel cell electrodes, with far lower costs than the current ones.
“Reducing the amount of platinum used in fuel cell electrodes is a priority, not only to contain costs but also to ensure environmental sustainability, as also indicated by the recent European directives” concludes Fabris. The European project ChipCAT, which funded this research, aims precisely to achieve this goal.
Learn more: Nanoparticles on nanosteps
The Latest on: Dispersed catalysts
via Google News
The Latest on: Dispersed catalysts
- Molecular catalyst converts carbon dioxide to methanolon November 27, 2019 at 10:15 am
A molecular catalyst dispersed on carbon nanotubes has been found to catalyse the electrochemical conversion of carbon dioxide to methanol — a liquid fuel and industrially useful bulk chemical.
- Mechanochemical synthesis of carbon-stabilized Cu/C, Co/C and Ni/C nanocomposites with prolonged resistance to oxidationon November 22, 2019 at 3:09 am
2–4) show embedded and highly dispersed metal nanoparticles (bright light dots ... and sensor devices as alternative sensor material for temperature and pressure sensing, as well as catalysts.
- Economizing on iridiumon November 19, 2019 at 8:34 am
The system makes use of a novel high-porosity oxidic support on which iridium can be evenly dispersed as a thin film, which is easily accessible to water molecules and exhibits high catalytic activity ...
- Atomically dispersed Ni is coke-resistant for dry reforming of methaneon November 15, 2019 at 7:53 am
Ni catalysts are the most promising candidates for DRM due to their low cost and high initial activity. However, in situ catalyst deactivation caused mainly by carbon deposition (coking ...
- Refinery Catalyst Market 2019 Global Business Outlook- Grace Catalysts Technologies, BASF, Albemarle, Criterionon November 14, 2019 at 11:52 pm
and Other MARKET SEGMENTATION BY TYPEFCC Catalysts Hydro-processing Catalyst Others MARKET SEGMENTATION BY APPLICATION Dispersed Catalyst Supported Catalyst SEGMENT BY REGIONS - North America (United ...
- A sulfur-tethering synthesis strategy toward high-loading atomically dispersed noble metal catalystson October 25, 2019 at 11:08 am
1 Hefei National Laboratory for Physical Sciences at the Microscale, Department of Chemistry, University of Science and Technology of China, Hefei 230026, China. 2 Institute of High Energy Physics, ...
- CAREER: Catalysis on Singly Dispersed Bimetallic Catalytic Siteson June 29, 2019 at 5:00 pm
Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge ...
- Atomically dispersed Fe3+ sites catalyze efficient CO2 electroreduction to COon June 13, 2019 at 11:19 am
1 Laboratory of Inorganic Synthesis and Catalysis, Institute of Chemical Sciences and Engineering, Ecole Polytechnique Fédérale de Lausanne (EPFL), EPFL-ISIC-LSCI, BCH 3305, Lausanne CH 1015, ...
- A non-negligible role of supports in atomically dispersed catalysts direct involvement in catalysison June 4, 2018 at 7:15 am
Single-atom catalysis is an emerging frontier of catalysis. However, there are still many fundamental issues that need to be addressed. For instance, can the atomically dispersed metal catalysts ...
- A catalyst for clean energyon March 14, 2018 at 11:18 am
Researchers have spent considerable time on single-atom catalysts and rarely explored an "atomically dispersed catalyst" featuring two atoms. In a paper titled "Stable iridium dinuclear heterogeneous ...
via Bing News