NUS researchers turn paper waste into ultralight super material that improves oil spill cleaning and heat insulation
A research team from the National University of Singapore’s (NUS) Faculty of Engineering has achieved a world’s first by successfully converting paper waste into green cellulose aerogels that are non-toxic, ultralight, flexible, extremely strong and water repellent.
This novel material is ideal for applications such as oil spill cleaning, heat insulation as well as packaging, and it can potentially be used as coating materials for drug delivery and as smart materials for various biomedical applications. This pioneering work was achieved by a team led by Assistant Professor Duong Hai Minh from the Department of Mechanical Engineering.
“Aerogels, which are among the lightest solid materials known to man, are one of the finest insulation materials available. Traditional aerogels are mainly made of silica, which is not environmentally-friendly. In contrast, cellulose is low cost and makes up 75 to 85 per cent of recycled paper. Our team developed a simple, cost-effective and fast method of converting paper waste into aerogels.
In addition to low thermal conductivity, these novel aerogels have several unique features, one of which is super high oil absorption capacity – it is up to four times higher than commercial sorbents available in the market. We are very excited about the potential applications of this new material,” said Asst Prof Duong.
Reduce environmental problems by recycling paper waste
The global production of paper is expected to increase to 500 million tonnes by 2020. The large amount of paper-related waste generated annually causes destruction of forestation and environmental pollution, and the enormous waste is also difficult to dispose. Recycling or converting paper waste into useful products, therefore, contributes towards environmental conservation.
The NUS team has also developed a more eco-friendly process to convert paper waste into aerogels.
“Our fabrication process uses 70 per cent less energy, produces fewer polluting emissions into the air and water, as well as uses less dioxins in the chlorine bleaching process. It is also faster – the entire process only takes three days,” explained Asst Prof Duong.
Four times more effective than commercial oil sorbents
The novel cellulose aerogels developed by the NUS team boast super high oil absorption capacity. Coated with Trimethoxy-methylsilane (MTMS), the aerogels are water repellent and are capable of absorbing oil (excluding water) up to 90 times their dry weight, making them up to four times more effective than commercial oil sorbents. Furthermore, they can be squeezed to recover over 99 per cent of the crude oil absorbed.
Elaborating on the potential application of the cellulose aerogels, Asst Prof Duong said, “Oil spills are serious disasters that threaten marine ecosystems. Sorption has been considered one of the most effective ways to clean oil spills. Polypropylene (PP)-based absorbents are widely used for oil absorption but they are non-biodegradable, and their absorption capabilities are both low and slow. Our novel cellulose aerogels therefore serve as an attractive alternative to current methods of oil spill cleaning, which has a potential market size of US$143.5 billion.”
Super heat insulation materials
Another important application of the novel cellulose aerogels is to serve as insulation materials for buildings.
In Singapore, air-conditioning of buildings take up about two-thirds of the energy consumption in buildings. About 25 to 50 per cent of heat losses are from windows, doors, basement and roof of the buildings. These have resulted in a high market demand for eco-friendly sorbents which have greater absorbency and water repellent properties, as well as effective heat insulation materials that are less costly to install. Thermal insulation of buildings is estimated to have a potential market of US$3.3 billion globally.
“As a heat insulation material, our novel cellulose aerogels offer a few added advantages. Their water repellent property allows them to be adaptable to both dry and rainy weather and their structure remains stable for about six months in tropical climate. Being extremely strong, they increase building strength. In addition, these aerogels are lightweight and slim, resulting in slimmer walls, thus increasing building space,” added Asst Prof Duong.
Potential applications aplenty
The novel cellulose aerogels developed by the NUS team could also signal a change in the packing industry. Plastic-based packing materials such as the bubble wrap could be replaced with biodegradable aerogel-based foam or advanced cellulose aerogel nanosheets, which are environmentally-friendly.
With high surface area and high porosity, the biodegradable aerogels could also be used as coating materials in drug delivery or as smart materials.
The NUS team has also discovered a way of expanding the weight capacity of the cellulose aerogels. This is done by infusing the fibres of the cellulose aerogels with a solution of metallic nanoparticles. The cellulose aerogels are then hammered flat to remove most of the air, resulting in a magnetic thin film that has a weight capacity of over 28 tonnes per square centimetre.
MTMS-uncoated cellulose aerogels are hydrophilic, thus they can also absorb and retain huge volumes of polar fluids such as water and alcohol. Therefore, they can be used in products such as baby diapers and sanitary napkins.
In addition, compressed cellulose aerogels can be used to plug life-threatening wounds such as a gunshot or stabbing lesion by injecting them into the wound cavity. The sponges expand inside the cavity, creating pressure that can block bleeding and life-threatening haemorrhage in 20 seconds or less. This incredible speed is a remarkable boon, which could greatly enhance survival rates.
From idea to market
The team has filed a patent for their invention in USA, China, India and Southeast Asia.
The Latest on: Cellulose aerogel
via Google News
The Latest on: Cellulose aerogel
- The Applications of Crystalline Nanocellulose (CNC)on November 6, 2019 at 6:40 am
Cellulose is the main building block of trees and plants ... CNC combined with graphene material makes the production of a flexible battery possible in the electronic industry. When CNC is mixed with ...
- The Market for Cellulose Nanofibers in Japan | Forecast to 2030 - ResearchAndMarkets.comon October 15, 2019 at 6:58 am
For more information about this report visit https://www.researchandmarkets.com/r/51f5zh ...
- Scientists Develop a Method to Remove Antibiotic Residue From Waste Wateron October 3, 2019 at 5:00 pm
Koel adds that the nanoporous materials research group studies also silica and cellulose aerogels and carbon aerogel produced at high temperature pyrolysis of organic aerogel (by heating up to ...
- Old clothes become aerogels that fight bleedingon April 4, 2019 at 5:00 pm
However, the expansion and absorption rates of cellulose-based sponges are still relatively slow. To address these limitations, the researchers developed highly compressible hybrid cotton aerogel ...
- UBC and McMaster researchers use plant cellulose for bone implantson March 28, 2019 at 4:27 pm
A research team from UBC and Ontario's McMaster University have developed a material based on plant cellulose that might replace synthetic bone implants. The injectable implant substance, called an ...
- New cellulose-based material gives three sensors in oneon March 26, 2019 at 6:00 pm
When nanofibres of cellulose are mixed with the conducting polymer PEDOT:PSS in water and the mixture is freeze-dried under vacuum, the resulting material has the same structure as a washing sponge, ...
- Cellulose aerogel material acts as three-in-one sensoron March 26, 2019 at 4:05 am
Researchers at Sweden’s Linköping University have developed a cellulose-based aerogel material that can independently measure pressure, temperature and humidity. PhD student Shaobo Han with the sensor ...
- Injectable Bone Scaffolding Made of Plant Celluloseon March 20, 2019 at 12:04 pm
“We created this cellulose nanocrystal aerogel as a more effective alternative to these synthetic materials.” Study in journal Acta Biomaterialia: Cross-linked cellulose nanocrystal aerogels as viable ...
- From foam to bone: Plant cellulose can pave the way for healthy bone implantson March 19, 2019 at 7:12 am
It’s made by treating nanocrystals derived from plant cellulose so that they link up and form a strong but lightweight sponge – technically speaking, an aerogel – that can compress or expand as needed ...
- Plant cellulose bone implants are “viable” option to support new bone growth, study findson March 19, 2019 at 6:45 am
Researchers treated nanocrystals derived from plant cellulose so that they can link up and form a strong but lightweight sponge (an aerogel) that can compress or expand as needed to completely fill ...
via Bing News