Researchers working under Juerg Leuthold, Professor of Photonics and Communications, have created the world’s smallest integrated optical switch. Applying a small voltage causes an atom to relocate, turning the switch on or off.
The quantity of data exchanged via communications networks around the globe is growing at a breathtaking rate. The volume of data for wired and mobile communications is currently increasing by 23% and 57% respectively every year. It is impossible to predict when this growth will end. This also means that all network components must constantly be made more efficient.
These components include so-called modulators, which convert the information that is originally available in electrical form into optical signals. Modulators are therefore nothing more than fast electrical switches that turn a laser signal on or off at the frequency of the incoming electrical signals. Modulators are installed in data centres in their thousands. However, they all have the disadvantage of being quite large. Measuring a few centimetres across, they take up a great deal of space when used in large numbers.
From micromodulators to nanomodulators
Six months ago, a working group led by Jürg Leuthold, Professor of Photonics and Communications already succeeded in proving that the technology could be made smaller and more energy-efficient. As part of that work, the researchers presented a micromodulator measuring just 10 micrometres across – or 10,000 times smaller than modulators in commercial use (see ETH News).
Leuthold and his colleagues have now taken this to the next level by developing the world’s smallest optical modulator. And this is probably as small as it can get: the component operates at the level of individual atoms. The footprint has therefore been further reduced by a factor of 1,000 if you include the switch together with the light guides. However, the switch itself is even smaller, with a size measured on the atomic scale. The team’s latest development was recently presented in the journal Nano Letters.
In fact, the modulator is significantly smaller than the wavelength of light used in the system. In telecommunications, optical signals are transmitted using laser light with a wavelength of 1.55 micrometres. Normally, an optical device can not be smaller than the wavelength it should process. “Until recently, even I thought it was impossible for us to undercut this limit,” stresses Leuthold.
But his senior scientist Alexandros Emboras proved the laws of optics wrong by successfully reconfiguring the construction of a modulator. This construction made it possible to penetrate the order of magnitude of individual atoms, even though the researchers were using light with a “standard wavelength”.
Emboras’s modulator consists of two tiny pads, one made of silver and the other of platinum, on top of an optical waveguide made of silicon. The two pads are arranged alongside each other at a distance of just a few nanometres, with a small bulge on the silver pad protruding into the gap and almost touching the platinum pad.
Short circuit thanks to a silver atom
And here’s how the modulator works: light entering from an optical fibre is guided to the entrance of the gap by the optical waveguide. Above the metallic surface, the light turns into a surface plasmon. A plasmon occurs when light transfers energy to electrons in the outermost atomic layer of the metal surface, causing the electrons to oscillate at the frequency of the incident light. These electron oscillations have a far smaller diameter than the ray of light itself. This allows them to enter the gap and pass through the bottleneck. On the other side of the gap, the electron oscillations can be converted back into optical signals.
If a voltage is now applied to the silver pad, a single silver atom or, at most, a few silver atoms move towards the tip of the point and position themselves at the end of it. This creates a short circuit between the silver and platinum pads, so that electrical current flows between them. This closes the loophole for the plasmon; the switch flips and the state changes from “on” to “off” or vice versa. As soon as the voltage falls below a certain threshold again, a silver atom moves back. The gap opens, the plasmon flows, and the switch is “on” again. This process can be repeated millions of times.
ETH Professor Mathieu Luisier, who participated in this study, simulated the system using a high-performance computer at the CSCS in Lugano. This allowed him to confirm that the short circuit at the tip of the silver point is brought about by a single atom.
A truly digital signal
As the plasmon has no other options than to pass through the bottleneck either completely or not at all, this produces a truly digital signal – a one or a zero. “This allows us to create a digital switch, as with a transistor. We have been looking for a solution like this for a long time,” summarises Leuthold.
As yet, the modulator is not ready for series production. Although it has the advantage of operating at room temperature, unlike other devices that work using quantum effects at this order of magnitude, it still remains very slow for a modulator: so far, it only works for switching frequencies in the megahertz range or below. The ETH researchers want to fine-tune it for frequencies in the gigahertz to terahertz range.
Read more: Switching light with a silver atom
The Latest on: Integrated optical switch
via Google News
The Latest on: Integrated optical switch
- PacketLight Networks Announces PL-4000 Muxponder and Transponder Product Line for High Capacity 400G Metro and 200G Long Haul Applicationson July 8, 2020 at 5:47 pm
PacketLight Networks, a leading provider of DWDM and optical fiber networking solutions, today announced the launch of the PL-4000 product line of modular, cost-effective, 400G muxponder and ...
- Telstra Wholesale deploys ADVA technology in Australian-first Ethernet serviceon July 2, 2020 at 12:00 am
ADVA (FSE: ADV) today announced that Telstra Wholesale has deployed its FSP 150 packet edge device with LTE backup to deliver the new Ethernet Access ...
- BeyondEdge Launches First SD-LAN XGS-PON Featuring Tibit MicroPlug OLTon July 1, 2020 at 1:32 am
BeyondEdge™, Inc., a software-defined, edge compute company with decades of experience in delivering high-speed, multi-vendor ...
- Anritsu Expands High-frequency Components Line to Address Emerging High-speed Design Test Requirementson June 25, 2020 at 11:44 am
and optical modulators. Development of switches and routers using NRZ and PAM4 modulation schemes with 56 Gbps and 112 Gbps data rates, and 800G technology are applications, as well. About Anritsu ...
- JVC DLA-N5 Reviewon June 24, 2020 at 3:01 am
The vents to either side of the huge, centrally mounted lens housing are neatly integrated ... of D-ILA chips and a so-called Wire Grid Optical Engine that prevents unwanted light from entering ...
- Clock synchronisation at serious speedon June 22, 2020 at 8:38 am
What they call “clock phase caching” could eventually eliminate one of the hurdles for the deployment of all-optical networks ... two years electronic switch integrated circuits double ...
- New High Speed, Ruggedized Fiber-to-USB Interface Converter Offers Security and Optical Isolationon June 21, 2020 at 5:01 pm
With its integrated rate buffering ... For a catalog of Electro Standards Network Converters and Switches, call 401-943-1164, [email protected], or www.ElectroStandards.com.
- NeoPhotonics Demonstrates 90 km 400ZR Transmission in 75 GHz DWDM Channels Enabling 25.6 Tbps per Fiber Capacityon June 18, 2020 at 5:43 am
About NeoPhotonics NeoPhotonics is a leading developer and manufacturer of lasers and optoelectronic solutions that transmit, receive and switch high-speed digital optical signals for Cloud and ...
- The silicon photonics market is projected to grow from USD 1.0 billion in 2020 to USD 3.0 billion by 2025, at a CAGR of 23.4%on June 16, 2020 at 11:00 am
Silicon photonics market to exhibit significant growth during 2020–2025 The silicon photonics market is projected to grow from USD 1.0 ...
- The silicon photonics market is projected to grow from USD 1.0 billion in 2020 to USD 3.0 billion by 2025, at a CAGR of 23.4%on June 15, 2020 at 5:00 pm
Factors accelerating the growth of the silicon photonics market are the rising demand for CMOS-integrated silicon ... variable optical attenuators, switches, cables, and sensors.
via Bing News